该系统实现了由应变计组成的电桥测量线路，以及传感器输出信号的处理，并实时传送至显示仪表。
In this system, bridge measurement wiring is composed of foil gauges and signal outputted by sensors is transmitted to the display instrument.
智能测量服务，用来读取、检查、整理和收集仪表数据，支持集中的仪表数据管理系统。
Smart metering services for reading, validating, qualifying, and aggregating meter data to support centralized meter data management systems.
用于需要有模拟信号输出的温度测量仪表和系统。
It is used for temperature measurement instruments and system that is an analogue signal output.
GOCE及其传感器、仪表支持系统和控制元件，实际上构成了一个单一的综合重力测量装置。
GOCE, with its sensor, system of supporting instrumentation and control elements, actually forms a single composite gravity-measuring device.
与传统的温度测量仪表相比，该系统具有结构简单、成本低、构建方便、工作可靠等特点，具有较高的应用价值。
Compared with the traditional temperature measurement instrument, this system has the advantages of simple structure, low cost, easy operation and high stability.
介绍了一种由计算机与网络仪表构成的电力数据实时测量系统。
This paper presents an electric data real-time measurement system composed of network instrument at the electric power station.
本应变测量系统由仪表放大器ad623和电压电流变送器XTR115构成，实现弱信号放大和电流环信号传输。
The measuring system is composed of instrumental amplifier AD623 and transmitter XTR115 to amplify weak signal and transmit current loop signal.
针对反应堆的特殊要求，主氦循环风机的设计包括总体结构、叶轮型式、冷却系统、轴承、测量仪表、电气贯穿件和隔断阀。
The design of the helium circulator involves the overall construction, the impeller type, the cooling system, the bearings, the instrumentation, the electrical penetrations, and the shutoff valve.
无线电高度表测量的是飞机离地面而不是离海平面的距离，用于自动导航及仪表着陆系统上。
Radio altimeters measure the distance of an aircraft above the ground rather than above sea level, they are used in automatic navigation and Blind-landing systems.
针型阀：是仪表测量管路系统中重要组成部分，主要有截止阀和球阀，其功用是作开启或切断管道通路用。
Needle valve: it is an important instrument measuring piping system components, mainly cut-off valve and ball valve, its purpose is to open or cut off access by pipeline.
仪表由测量系统，指装置，磁助电接点装置，外壳，调节装置及接线盒等组成。
The meter make of the test system, note setting, magnet electric point setting, shield, control and joint box.
它对于各种采用了微处理机的数字测量系统和智能仪表都是适用的。
To be sure, this nonlinear digital filter mentioned in the paper are suitable for the intelligent instruments and digital measurement systems with a micr…
介绍了利用电容液位计和DCS控制系统的比值仪表模块的结合，成功地对成品碱地槽液位测量实施改进的工作内容。
Combing capacitance-type level meter and ratio instrument module of DCS controlling system level determination of product caustic soda ground bunker was successfully innovated.
信号检测模块采用仪表放大、程控增益放大、积累检测方式等措施有效地提高了测量系统的信噪比。
The measure module has bigger Signal-to-Noise Ratio because adopting instrumentation amplifier, Programmable gain amplifier and accumulate measurement.
仪表的作用原理是基于弹性元件（测量系统上的膜片）变形。
Operation principle of the meters is based on distortion of elastic components (diaphragm used in measuring system).
控制和仪表系统，包括：控制箱，警报监测系统，牵引链，油罐液位测量系统，电气测试台等。
The control and instrumentation systems, including: control box, alarm monitoring system, traction chains, tank level measurement system, electrical test bench and so on.
它可与DCS等组成测量控制系统，也可单独作为计量仪表在计量管理、商贸结算中应用。
It can constitute measuring control system with DCS etc, can also be used as measuring instrumentation for measuring control commercial and trading.
仪表由测量系统、指示装置、电接点装置、外壳、调节装置及接线盒等组成。
This instrument consists of measuring system, indicating device, magnet-assisted electric contact device, outer housing, adjusting device, junction box, etc.
具体地分析了指针式仪表的几何特征参数，在此基础上提出指针式仪表视觉检测系统的测量原理。
On the basis of concrete analysis of the geometric feature parameters of the gauge, the measuring theory of the computer vision test system is suggested.
文中介绍了应用该仪表系统测量火花等级来诊断电机故障的例子。
As an example, it is recommended to diagnose the fault of motor by measuring the rank of spark with this system.
仪表由测量系统、指示装置、电接点组件装置、外壳、调整装置和接线盒(插头座)等组成。
The instrument is consisted of measurement system, indicating system, electric contact parts system, case, adjustment system, junction box (socket) and otherwise.
介绍了计算机与网络仪表构成的电力参数测量系统，包括系统的组成、特点、硬件结构以及软件的设计思想。
Present a system based on computer and network instruments, including the constitution, feature, structure of hardware and the design concept.
仪表由测量系统、指示装置、电接点装置、外壳、调节装置及接线盒等组成。
This instrument consists of measuring system, indicating device, magnet-assisted electric contact device, outer housing, adjusting device, and junction box, etc.
文中详细介绍了在不使用二次仪表的前提下，基于虚拟仪器技术的大直径高精度测量系统的集成方法；
The high accuracy measurement system by multi-rolling method can be used to measure the diameter and roundness error of the large diameter.
仪表由测量系统、传动指示机构和外壳等组成。
The meter buildup with test system, transmit note structure, and body.
以巴基斯坦恰希玛核电站一期辐射监测系统近两年测量数据为依据，对该核电站辐射监测仪表的运行工况进行分析。
According to the radiation monitoring data in adjacent two years' of Chashma Nuclear Power Plant, the operating condition of radiation monitoring instrument is analyzed in the paper.
仪表的测量系统由接头、弹簧管和传动机构组成。通过指针指示仪表读数。
The system of measurement is composed by joint, spring pipe, and power transmission setting, and use the needle to note the number.
以LJ21E可编程流量演算仪取代模拟式流量测量和积算仪表，可使系统精度优于0.8%。
By replacing the analog flow measurement and totalizing instrument with LJ21E programmable flow calculator, the system accuracy will be better than 0. 8%.
以LJ21E可编程流量演算仪取代模拟式流量测量和积算仪表，可使系统精度优于0.8%。
By replacing the analog flow measurement and totalizing instrument with LJ21E programmable flow calculator, the system accuracy will be better than 0. 8%.
应用推荐