错误：无法检测和初始化以太网控制器。
这种机器具有32MB的RAM和一个以太网控制器。
大多数新主板，集成了以太网控制器支持这一功能。
Most of new motherboards that has integrated Ethernet controller supports this feature.
并将我们的以太网控制器应用于液位系统的控制，得到了令人满意的结果。
And we applied the controller to a water tank control system, the results showed great satisfaction.
分析了以太网控制器的内部结构和工作原理，并用其设计了以太网接口电路。
The internal structure and principle of Ethernet controller are analyzed, and the Ethernet interface circuit is designed using this controller.
数据输出模块将组帧后的数据传送到以太网控制器，继而发送给二次保护测控设备。
Data-output module, its functions is transmitting combining frame data to Ethernet controller, then send the data to the protective device.
介绍以太网控制器芯片rtl 8019as的结构和应用于多媒体网络中控的编程技术。
This paper introduces RTL8019AS Ethernet controller's structure and programmed technology that used in network central control system.
因为还有另一个有着相同的总线和插槽编号(而功能不同)的以太网控制器，所以这是一个两口的控制器。
Because there is another Ethernet controller with the same bus and slot number (and a different function), this is a two-port controller.
使用物理层网络控制芯片配合微控制器片内集成的EMAC以太网控制器，提供对网络传输的支持。
The system employs a Fast Ethernet Physical Layer Chip and EMAC embedded in MCU to support network transmission.
为了实时监测机械传动试验台工作状态信号，采用基于嵌入式以太网控制器8000e的远程监测系统。
For monitoring the working state signal of mechanical transmission test-bed immediately, adopt the remote monitoring system which bases on embedded Ethernet controller 8000e.
本文介绍了基于MCS51系列单片机和CS8900 A以太网控制器的数据的网络传输，井给出了软硬件的实现方法。
The paper introduces the transmission of data based on MCS51 microcontroller series and Ethernet controller -cs8900a. Also, the software and hardware method is given to realize it.
例如，规范说明为 02:01.0 的以太网控制器，告诉您这个插件是在 #02总线的 #01插槽中，其功能是 #0 。
For instance, the Ethernet controller with specification 02:01.0 tells you that the card is in bus #02, slot #01, with function #0.
介绍一种以ARM微控制器LPC2210和网络控制器RTL8019AS为核心的直流电机嵌入式以太网控制器设计方案。
This paper describes a kind of DC Motor Ethernet control system which is composed of ARM microcontroller LPC2210 and Ethernet microcontroller RTL8019AS.
然后重点阐述了嵌入式通信平台RTL8019AS以太网控制器和串口驱动程序的设计方法，并分析了驱动程序的调试方法；
Then mainly expatiates RTL8019AS Ethernet controller driver and serial interface driver of embedded communication platform; Finally, discusses the application program development and driver testing.
介绍了以太网控制器芯片RTL8019AS，并给出了单片机控制RTL8019AS实现以太网通讯硬件电路的实现方法；
Ethernet controller RTL8019AS is introduced, and a method of single-chip computer controlling RTL8019AS to achieve ethernet communication is gived;
采用集成CAN通信控制器的MC68 HC 05x16单片机和RTL8019AS以太网控制器可实现CAN与以太网的连接。
The connection between can bus and Ethernet can be realized with MC68HC05X16 microcomputer integrated can communication controller and RTL8019AS Ethernet controller.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
为了排除人为干扰、提高可靠性，采集数据以可编程逻辑控制器为核心，通过现场总线和以太网的多层网络传送至数据库中。
To avoid interfering by work, data were sampled through a multi-layers network which synthesize the field-bus and Ethernet and center on programmable logic controller.
本文设计了一种新的基于以太网的异构数控系统联网方案，并且设计出用于联网通讯的通讯控制器。
A new networking project based on Ethernet for different numerical control systems and communication controller for network communication are designed in this paper.
在用以太网作为传输媒体的计算机网络化控制系统的基础上，提出了一种基于智能代理技术有双控制器的计算机网络化控制系统。
Computer networked control system with Ethernet is taken as a transfer medium, a computer networked control system with dual controllers based on Intelligent Agent technology is proposed.
该控制器也可以作为开发工业以太网仪器仪表的基础。
The network controller is also the base of Industrial Ethernet devices.
系列MicroLogix 1100控制器将包含一个内置以太网Web服务器，它可以通过电子邮件向用户通报生产故障。
Series B MicroLogix 1100 controllers will include an onboard Ethernet Web server with the ability to notify users of production faults via email.
本文详细讨论了CAN—以太网数据转换控制器及上位机配置软件的设计。
This paper discussed detailedly about the CAN Bus-Ethernet Controller of Data Exchange design and configure software design.
通信分机一是一个多功能的模块化通信设备，从对外接口方面划分为SPI主控制器模块以及以太网传输模块两个部分。
This equipment switched SPI data and Ethernet data from one to another is divided into SPI master controller module and Ethernet module.
本文首先介绍目前几种常见的自动抄表系统，分析它们各自的特点，然后重点介绍以太网抄表系统及其控制器的设计与实现。
This paper introduces some familiar AMR systems, analyzes their characteristics at first, and keeps emphasis on the design of controller based on Ethernet AMR system.
本文详细介绍了设计实现为256级灰度图像显示，并通过以太网实现远程高速图像数据传输的异步led显示屏控制器的硬件系统设计。
It introduces in detail the design of 256 gray-grade image displaying and Ethernet communication technology application in LED panel control system.
主控制器连接以太网和各从属控制模块；
The master controller connects Ethernet and the slave control modules;
底层主控制器与上位机之间采用以太网进行通信，实现了对系统的远程控制。
Ethernet communication is used for communication between the host computer and bottom controller to implement remote control of the system.
最后，在以太网中对智能家居控制器进行了测试。
PC的网卡连接到使用标准以太网电缆的枢纽，连接枢纽，使用标准以太网电缆再次，总站控制器。
Connect the PC's network card to the hub using a standard Ethernet cable, and connect the hub, again using a standard Ethernet cable, to the Bus Terminal controller.
应用推荐