随着镍价格的上涨，各种代镍节镍工艺应运而生。
With increasing nickel cost, various kinds of alternatives to nickel plating and nickel saving technicses have been developed.
结果表明，以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that LCHA with Mn in place of Ni could gain the anticipated structure and performance.
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
为了减少镍的用量，电镀行业十分重视对节镍、代镍电镀工艺的研究。
It's emphasized upon technology research for nickel saving and nickel substitute plating in the electroplating industry in order to lower consumption of nickel material.
本文就对以锰代镍制取低成本低碳高合金钢，以及锰元素对其组织与性能的影响作了一些探讨。
This article use Mn to replace Ni to make low-cost LCHA, and the effect of Mn on structure and properties of LCHA was discussed following.
电镀铜锡合金是一种合适的代镍镀层，它不使人体过敏，能满足防扩散性能的要求，且成本较低。
Cu Sn plating is a right substitute for nickel coating because it is not allergic to human body, can meet anti diffusion requirement and has a lower cost.
结果表明，碳显著的影响低碳高合金钢的组织和性能，而以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that carbon influences structure and properties of LCHA significantly, and substitution for nickel with manganese may result in expected structure and properties.
简要介绍了已开发的多层镍电镀工艺、铜锡合金、铜锌合金、锌铁合金、镍铁合金等代镍工艺，以及厚(薄)铜薄镍电镀工艺。
The developed processes such as multi-layer nickel plating, tin-copper alloy plating, zinc-copper alloy plating, iron-zinc alloy plating, iron-nickel plating and thick copper with thin nickel la...
在改进的MLD - 10型冲击腐蚀磨损试验机上，选择三种不同的冲击功，对以锰代镍的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
Under three different impact energy, LCHA with Mn in place of Ni were tested with a modified MLD-10 wear tester to investigate their behavior of corrosive impact abrasion.
1990年代的大部分时期，它是便携式电子设备的优选，在许多应用领域取代了镍镉电池。
For much of the 1990s it was the battery of choice for powering portable electronic devices, displacing nickel-cadmium batteries in many applications.
看来，丰田汽车还是要在2009年推出的第三代Prius上使用那沉重的，仅能短程使用的镍电池。
Toyota is therefore likely to stick with the heavy and range-limited nickel-metal hydride battery for the third-generation Prius, due in 2009.
对新一代镀镍光亮剂的特点做了介绍，对产生这些特点的机理做了探讨。
Characteristics of the new generation brightener for nickel plating were introduced. Mechanism producing these characteristics was discussed.
在铁镍部分代钴的基础上，采用常规硬质合金工艺，以不同的混合稀土添加量进行了实验。
The conventional producing process of cemented carbide was applied on the basis of replacing cobalt partly with iron and nickel and the mixed rare earth of different content was added.
白马寨镍矿区煌斑岩位于哀牢山断裂带的南段，是该条带上新生代富钾火成岩的重要组成部分。
Lamprophyres in the Baimazhai nickel deposit are located on the southern segment of Ailaoshan fault belt.
锌代氢氧化镍纳米结构的形成过程可以解释为复杂的均匀沉淀机制。
The complex homogeneous precipitation mechanism has been proposed for explaining the formation process of zinc-substituted nickel hydroxide nanostructures.
锡镍枪黑色、锡钴合金镀枪黑色、白铜锡代铬、无氰环保滚挂镀白铜锡。
Five, tin gun black, tin cobalt nickel alloy plating gun black, cupronickel tin and chromium, cyanogens plating cupronickel tin environmental roll.
研究表明磷化镍在加氢脱硫反应过程中显示出优异的深度脱硫性能，被认为是新一代加氢脱硫催化剂。
Nickel phosphides(Ni2P) as the active component in the hydrodesulfurization process which have showed excellent desulfurization performance is considered as new generation of HDS catalysts.
批量生产的新一代专利产品—多用途臭氧电源，引进纳米镍钛合金电极臭氧发生片配套。
Mass production of a new generation of patented products - multi-purpose ozone power supply, the introduction of nano-nickel alloy electrode supporting film ozone.
批量生产的新一代专利产品—多用途臭氧电源，引进纳米镍钛合金电极臭氧发生片配套。
Mass production of a new generation of patented products - multi-purpose ozone power supply, the introduction of nano-nickel alloy electrode supporting film ozone.
应用推荐