该系统使用一个交流驱动系统用于向测试对象提供直接耦合输入。
The test system uses an AC drive system which provides direct coupled input to the test item.
实验表明，基于上述控制策略设计的煤矿电机车交流驱动系统性能样机运行可靠、稳定。
The experimental results indicate that according to proposed design principle of AC drive system, the test prototype of coal mine electric locomotive is stable and reliable.
该系统产生的电流为直流电，所以用来驱动本地的直流点装置比将其转化为交流电输入电网来的更有效率。
The system generates a direct current, so using it to power DC devices locally is more efficient than switching to the alternating current needed to feed it back to the grid.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
介绍在刚性连接方式下，用两台交流伺服电机同时驱动同一负载方案的组成、硬件和软件，给出了该系统的实验结果。
Introduce the composition, the hardware and software for two AC servo motors which drive loads simultaneously under rigid connection. Also Present the experimental results.
由交流伺服系统直接驱动的机器人关节一体化设计已成为一个重要研究方向。
One important research aspect has come into being which is robot integral joint design driven directly by AC servo system.
重点介绍了永磁交流伺服系统的控制策略，位置检测和辨识、主电路和驱动技术等关键技术。
This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.
同时采用交流伺服电机作为驱动元件，基于MPC02运动控制卡作为上位控制单元构建了开放式控制系统。
In the meantime, by using an AC servo motor as the driving parts and based on the MPC02 motion control card, the open control system was formed.
采用GE交流电驱动系统技术，成功减少了系统保养工作量，更大力提高了车辆爬坡能力。
By adopting GE alternator drive system technology, system maintenance workload has been reduced and its grade ability has improved dramatically.
针对直接驱动的交流永磁直线伺服系统，提出一种基于神经元补偿控制的全程滑模变结构控制策略。
A global sliding model variable structure control scheme based on artificial neuron compensation for a direct drive AC permanent magnet linear servo system are presented in this paper.
介绍了激光内雕机中三维控制系统硬件和软件的设计，并对传动机构交流伺服驱动进行了论述。
The hardware and software design of three_dimensional control system in the laser inner carver is introduced, also transmission mechanism ac servo drive has been given account.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
交流伺服控制系统的组成本文所设计的交流伺服控制系统是用于数控机床上的进给驱动系统。
This paper introduces an AC servo control system based on the design of CPLD and analogue controller integration.
研究了方波电流驱动的永磁无刷电机交流伺服系统。
This paper deals with an AC servo system with permanent magnetic brushless motor driven by square wave current.
因此，矩阵变换器驱动异步电动机系统被称为下一代的交流电气传动模式。
Therefore, matrix converter fed induction motor drive systems has high potency in the next generation of ASDs.
所研究的控制方法均在AC200交流伺服驱动系统的频率域实验模型上做了仿真实验，结果支持了本文分析所得的结论。
All the concerned control strategies are supported with the simulation results that are made on the experimental frequency domain model of the AC200 servo drive system.
提出一种基于斐波那契数列的寻优方法来提高交流电机驱动系统的效率。
This paper presents a new approach, Fibonacci sequence based on-line efficiency optimization control, for improving the efficiency of induction motor drive systems.
在此基础上本文对全数字交流永磁伺服驱动系统的一些关键部分进行了电路设计。
On this basis, this paper designs the circuit of some of the key parts of all digital AC servo driving system of permanent magnet.
全数字PWM 交流主轴驱动系统的关键在于如何实时地得到PWM 开关信号。
The key of the fully digital PWM speed regulation system is how to get the PWM signals on-line.
对永磁交流伺服精密驱动系统进行动力学分析时，必须考虑系统的机电耦合影响。
Electromechanical coupling effect is considered in the dynamic analysis on permanent magnet AC servo precision derive system.
提出了一种用于电动汽车的高频交流脉冲密度驱动系统并阐述了系统的工作原理和控制方法。
A novel drive system with high frequency AC pulse density modulation for electric vehicles is proposed, and its operation principle and control method are studied in detail.
采用交流伺服电机和机械驱动进给系统的冷轧环机，其进给伺服控制系统的设计需要一个新的工艺动力学模型。
The feed drive system of a precision cold ring rolling mill adopts AC servo motor and mechanical transmission, rather than conventional electro-hydraulic actuator.
说明：系统驱动程序备份工具，VB制作，非常好用，适合学习交流。
System driver backup tool, VB production, is very nice, suitable for learning exchange.
针对机械比对力机的工艺和控制要求，详细介绍了西门子SIMODRIVE 611a交流伺服驱动系统在机械比对力机上的应用。
Aim at technics and control of build-up standard machine, particular introduced the appliance of Siemens SIMODRIVE 611a ac servo system in build-up standard machine.
针对直接驱动直线式交流伺服系统，提出了一种基于模糊自学习的滑模变结构控制方案。
This paper presents a sliding mode variable structure control (SMVSC) method based on fuzzy self-learning for a direct-drive AC Lin ear servo system.
研究了一种高性能全数字交流感应电机矢量控制驱动系统。
The paper presented the vector controlled drive system of AC induction motor.
文中重点叙述了MPC02运动控制卡、松下交流伺服电机和驱动器及工控机组成的硬件系统。
The hardware system that composed by MPC02 card, Panasonic AC servo motors and their drivers was mainly discussed.
文中重点叙述了MPC02运动控制卡、松下交流伺服电机和驱动器及工控机组成的硬件系统。
The hardware system that composed by MPC02 card, Panasonic AC servo motors and their drivers was mainly discussed.
应用推荐