介绍了基于TMS320F2812交流伺服电机控制系统的整体方案设计。
The whole project design of the AC servo motor control system based on TMS320F2812 is introduced.
介绍交流伺服电机控制系统的组成、主要特性、控制原理及在系统调试过程中应注意的事项。
The article introduced the composition, the main characteristics and the control principle of the ac servo motor control system as well as points for attention in the system debugging process.
介绍自行研制的基于80C196KC单片机的交流伺服电机控制卡的硬件设计及其软件实现。
The paper introduces the hardware and software design of an AC servo motor control card based on 80C196KC.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
目前常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
采用全数字技术实现对交流永磁同步电机的伺服控制，并将此项技术应用于工业缝纫机领域。
The full digital technique was adopted to realize the servo control of the ac permanent-magnet synchronous (motor.) the technology was applied in the industrial sewing machine.
提出了一种采用滑模观测器的交流永磁直线伺服电机无传感器控制的新方法。
A new sensorless control method for AC permanent magnet linear servo motor using a sliding mode observer is proposed in this paper.
下位TMSF2812型DSP芯片则主要用于实现复杂的插补及控制算法，并以西门子伺服驱动放大器和交流伺服电机作为驱动单元，对改造后的数控铣床各轴进行位置控制。
The lower DSP (TMS F2812) is used to realize the interpolation and control of three axes for the retrofitted CNC milling machine equipped with SIEMENS servo drive amplifiers and ac servo motors.
针对永磁同步电机交流伺服系统，提出了串级滑模控制方案。
A cascaded slide mode control scheme is designed for permanent magnetic synchronous machine ac servo system.
主要分析了用模糊自适应PI控制构成永磁同步电机交流伺服系统的位置环。
The position control loop composed of self-adjusting PI control based on Fuzzy inferences in AC servo system of permanent magnet synchronous motor was discussed emphaticaly in this paper.
介绍了一种用于电脑全自动工业平缝机的永磁交流伺服电机及其控制系统。
Permanent ac servo motor control system of lockstitch sewing machine is introduced.
采用台达交流伺服电机及控制器实现精确定长剪切，全闭环控制。
DELTA AC servo motors and controllers to determine the precise length cut, closed loop control.
针对以交流伺服电机驱动的二自由度并联机器人，设计了智能模糊滑模控制算法。
An intelligent fuzzy sliding mode control for 2-dof parallel robot which derived by AC servo motor was designed.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
采用交流伺服电机和机械驱动进给系统的冷轧环机，其进给伺服控制系统的设计需要一个新的工艺动力学模型。
The feed drive system of a precision cold ring rolling mill adopts AC servo motor and mechanical transmission, rather than conventional electro-hydraulic actuator.
同时采用交流伺服电机作为驱动元件，基于MPC02运动控制卡作为上位控制单元构建了开放式控制系统。
In the meantime, by using an AC servo motor as the driving parts and based on the MPC02 motion control card, the open control system was formed.
介绍了一种由at89c 51单片机控制交流伺服电机的系统方案，包括系统硬件设计和软件设计。
The paper provides a scheme to control AC servo-motor using single chip-computer AT89C51, including hardware design and software design.
主要介绍了全数字式交流伺服电机在万能材料试验机控制系统中的应用，并给出了将松下MINASA系列伺服电机用于5吨材料试验机的例子。
This paper introduced how to use digital ac servo motor in the universal material testing machine, and give an example of applying MINAS a serial servo motor to 5 tons material testing machine.
在永磁同步电机交流伺服系统中，采用直接转矩控制及模糊自适应PI控制构成位置伺服控制器。
For AC servo system of permanent magnet synchronous motor (PMSM), the position servo controller was constructed with direct torque control and self-adjusting PI control based on Fuzzy inferences.
文中重点叙述了PMAC可编程多轴运动控制器、松下交流伺服电机和驱动器及工控机组成的硬件系统。
This thesis gives great emphases on the hardware system consisted of PMAC, Panasonic AC servo-motors, drivers and IPC.
针对矢量控制交流感应电机伺服系统，提出并设计一种模糊滑模pd型位置控制器。
This paper proposed a fuzzy sliding PD-type position controller for vector controlled induction motor servo drive.
文中重点叙述了MPC02运动控制卡、松下交流伺服电机和驱动器及工控机组成的硬件系统。
The hardware system that composed by MPC02 card, Panasonic AC servo motors and their drivers was mainly discussed.
给出了伺服控制器的硬件设计，选用美国TI公司专门为数字运动和电机控制推出的DSP控制器TMS320LF2407来实现交流伺服系统。
The hardware design of the servo controller. We choose the TMS320LF2407 DSP made by TI to implement the AC Servo System.
研究了一种由交流伺服电机驱动的全自动高速平缝机控制器。
The automatic high-speed sewing machine controller is studied in this paper.
阐述了永磁同步电机的矢量控制原理、准线性化解耦，交流电流控制方式和伺服增益调整方法。
The vector control principle of the PMSM, the realization of the current control for SPWN inverter by quasi-linear decoupling, and a comparison between the AC and DC current control are described.
介绍如何实现PMAC LITE四轴运动控制器对SCARA机器人的控制，具体阐述了基于PMAC下，交流伺服电机的调整以及SCARA机器人轨迹的生成。
This paper introduces how to control SCARA by PMACLITE motion controller. It expatiates how to tune AC servo motor and create track of SCARA based on PMAC.
通过变频器、交流伺服电机、行程光电编码器等设备组成了行程控制系统，实现了可移动台架位置的精确控制。
Travelling control system is composed of a transducer, an AC servo motor, an optical encoder and other components, which achieves precise control of the movable bench's position.
采用台达交流伺服电机及控制器实现精确定长剪切，全闭环控制。
DELTA AC servo motor and controller for precision to determine the long cut, full closed-loop control.
采用台达交流伺服电机及控制器实现精确定长剪切，全闭环控制。
DELTA AC servo motor and controller for precision to determine the long cut, full closed-loop control.
应用推荐