项目不需要交叉支撑或斜撑构件。
交叉支撑装置是提速货车转向架的关键部件之一。
Cross sustaining device is one of the key parts of speed increased freight car bogies.
自顶层跨边开始拆卸交叉支撑，同步拆下顶撑连墙杆与顶层门架。
Since the cross-border began to demolish the top cross support, remove the top stays synchronized with rod and the top wall of the door frame.
交叉支撑装置可以提高转向架的抗菱刚度，从而提高了车辆的运行速度。
Bottom frame brace system was imported from SCT and it intends to increase the anti-warp performance so that the freight car operating speed can be raised.
介绍了转8a型转向架加装侧架下交叉支撑装置的改造过程及改造中应注意的问题。
Described are the reform process in which the Zhuan 8a bogies are added with crossed devices under side frames, as well as points which should be paid attention to in the reform.
介绍了2e轴中交叉支撑低动力作用货车转向架的主要技术参数、设计思想、设计结构及试验等情况。
The main technical parameters, design thought, design structure and testing of the higher cross braced low power freight car bogies with 2e axles are described.
这种豪华摆动幕可以横向、纵向转到任何你需要的位置，屏幕反面的交叉支撑方式保证银幕的平整性。
The deluxe screen can be adjussted horizontally and vertically to any location needed. The intercross support frame prevents screen surfaces from wrinkles.
在交叉支撑装置中的另一个重要零件——锁紧板的制造工艺中，采用了冲头保护装置，解决了失稳折断问题。
In the manufacturing of the lock plate as an important part placed in the crossing support device, we solved the problem of die breaking by using of stroke protecting device.
运用SIMPACK动力学软件，通过模拟计算，仅就交叉支撑装置对转向架动力学性能的影响进行了初步探讨。
By simulation and calculation, the influence of cross sustaining device to the dynamic character of bogie is basically discussed via the SIMPACK software.
介绍了下交叉支撑转向架的结构特点和关键技术参数，对侧架导框的加工、侧架与支撑座的组焊和转向架的组装工艺等着重进行了分析。
Mainly analyzed are the technologies in processing of side frame guides, assembly by welding of the side frame and braced seat, and assembly of the bogie.
这种材料并不完全强于它的同类型材料——交叉叠合木材，这就是支撑性的钢铁和混凝土结构必须存在的原因。
This material is not quite as strong as its sister material, cross-laminated timber, which is why the supporting steel and concrete structures will be necessary.
所有的轮椅有三重交叉酒吧和抗扭曲的支撑框架。
All the wheelchairs have triple cross bars and anti twist bracing to the frames.
在柔性梁的交叉区域中和在支撑体的上方的环形区域中对SOI的半导体层和中间绝缘层进行蚀刻。
The semiconductor layer and intermediate insulator of the SOI are etched in crossed region of the flexible beam cross and in a looped region above the support body.
支撑和交叉的梁-柱，是该项目和其结构系统表现的基础，基于打破对称性而形成的一个严肃的场所；
The support and intersection Beam – Pilar, is the basis of the project's and structural system's expression, creating a formal game based on the breakdown of symmetries;
在交叉区域的连接件层将质量体和柔性梁联接，并且在柔性梁外侧的连接件层将柔性梁和支撑体联接。
The connector layer in the crossed region couples the mass body and flexible beam cross, and the connector layer outside the flexible beam cross couples the flexible beam cross and support body.
上扬在12点之后停止，价格跌到与8条移动平均线交叉(C点)，而5条移动移动平均线拉回并在同一水平找到支撑(D点)。
The rally stalls after 12 PM, dropping price back to the 8-bar SMA (c), while the 5-bar SMA pulls back and finds support at the same level (d), ahead of a final rally thrust.
本文对无支撑、钢带支撑、槽钢支撑和十字交叉钢带支撑的C型截面柱的墙柱骨架进行了在轴心压力作用下的足尺试验。
The full-scale tests are carried out in this research for the wall-stud structures with C-type cross section stud which subject to centric axial loads.
研究结果表明，增补的时相，交叉步腾空时间、双支撑持续时间与标枪成绩的关联度较高。
The result proved that the time supplemented, the jumping time of cross steps, sustaining time of double support was highly related to the final results.
投掷标枪中，左腿在交叉步与最后用力的衔接中起到了引导、动和支撑的作用。
In the javelin throw, the left leg plays the roles of guiding, braking and sustaining in the join of cross steps and final force.
在标枪投掷技术中，左腿在交叉步及最后用力的衔接中起到引导、制动和支撑的作用。
This article probes into the left leg movement and its significance in the close link of cross steps and final force for the purpose of fully understanding the role of left leg in the javelin throw.
在标枪投掷技术中，左腿在交叉步及最后用力的衔接中起到引导、制动和支撑的作用。
This article probes into the left leg movement and its significance in the close link of cross steps and final force for the purpose of fully understanding the role of left leg in the javelin throw.
应用推荐