本文阐述局部网与异种机互连方法。
This paper presents a method for the interconnecting of local network with heterogeneous computer.
SOAP是使用与语言无关的XML在Web 上交换信息的方法，从而允许与使用不同语言编写的应用实现互连。
SOAP is a way of exchanging information over the Web using language-independent XML, thereby allowing applications written in different languages to interconnect with each other.
两者使用的方法或许不同，但其设想是一样的：那就是构建可适应公司业务需求并可通过网络互连的IT系统。
The approaches may be different but the vision is the same: to create IT systems that adapt to the business needs of companies and allow them to connect.
一种定位和剪开基因链的方法叫做“锌指”——由基因链组成的蛋白质，它可以通过高特异性辨识到DNA的“接头”，并和DNA相互连接起来。
One approach for locating and snipping DNA strands involves "zinc fingers" - proteins that bind to DNA and can be linked together to recognise extended stretches of DNA with very high specificity.
MDA方法构建在较早期的系统规范标准的工作上，并且为定义相互连接的系统提供一种全面的具有互操作能力的框架。
The MDA approach builds on earlier system specification standards work, and it provides a comprehensive interoperability framework for defining interconnected systems.
本文提出一种用一块单极性掩模板表示双极性互连矩阵的偏振编码方法。
A polarization coding method representing the bipolar interconnection by using a single bipolarized mask is proposed.
从面向应用的角度出发，针对FPGA内部互连资源提出一种新的故障检测方法。
This paper proposes a new fault detection method of interconnect resource in (FPGA) from the point of view of application.
提出一种基于微分求积法、对互连线的响应波形进行灵敏度分析的新方法。
Based on differential quadrature method (DQM), a new method for sensitivity analysis of response waveforms of interconnect lines is proposed.
基于桥接成员实现多联邦互连是目前较为通用和可行的方法。
The Bridge Federate is a feasible solution to achieve multi - federations interconnection.
将实现3d互连的方法分为引线键合、倒装芯片、硅通孔、薄膜导线等，并对它们的优缺点进行了分析。
The methods of 3d interconnection can be classified into the wire bonding, flip chip, through silicon via (TSV) and film wire technology, whose advantages and disadvantages are analyzed.
电力信息系统是典型的分布式互连系统，需要采用系统化的方法进行安全设计。
Power information system is a typical distributed and interconnected system, which needs a systematic security design method.
实现多联邦互连有多种方法，桥接成员是其中一种。
Using the Bridge Federate is one of the approaches to interconnect HLA multiple federations.
首先运用全波方法提取互连线的频变等效电路参数。
The frequency dependent parameters of the interconnection lines are extracted by the full wave method firstly.
从技术实现的角度阐述了两个系统互连的详细配置以及有关MARC数据的导入导出的方法和步骤。
From the Angle of technique realization, it also elaborates the detailed layouts of two interconnected systems, along with means and the moves of MARC 's data gathering and derivations.
介绍了MCM-C的CAD设计方法，以及MCM-C基板的制作与金属化、芯片的测试和老化、芯片互连等工艺。
This paper describes the CAD method for MCM-C, the fabrication and metallization processes of MCM-C substrates, and the technologies for die test, burn-in and interconnection.
介绍一种简单、方便、可靠的IBM主机与VAX主机互连的方法。
A method of interconnection between IBM - Host and VAX - Hostis introduced.
从光纤互连的角度分析了车载数据网络中访问方法的使用。
This paper examines the use of access methods from the point of view of fiber-optic interconnection of data networks for vetronics.
金属还原方法，多层互连结构及制法，半导体器件及制法。
Method for reducing metal, multilayer interconnection structure and manufacturing method for the same, and semiconductor device and manufacturing method for the same.
论文介绍了互连参数的内容、受集成电路工艺变异的影响及定性方法；
The thesis introduced the interconnect parameters and the influence of process variations and the charactering method.
提出通过中继实现局网互连的方法。
A method based on Frame Relay to realize LAN interconnection is presented.
本文详细描述了它们的工作原理、控制方法、相互连接方法以及与外部数据终端和与生理数字信号的接口。
Their work principle, control method, interconnection method as well as interface with the outside data terminal and with the physiology numeral signal has detailedly been described.
本文介绍一种多级互连网络的图分析与设计方法。
In this paper, a graphical analysis and design method for multistage interconnection network is described.
本文介绍了高速并行总线互连设计中出现的信号完整性问题及新的设计方法学。
This paper introduces the problems of Signal Integrity in high-speed parallel bus interconnect design and the new design methodology.
考虑纳米尺度互连线的散射效应，提出了一种改进的时序分析方法。
We propose an improved statistical approach for modeling interconnect slew that takes into account the scattering effect of a nanoscale wire.
基于“有效电容”的概念提出了一种分析两相邻耦合r C互连延时的方法。
An approach for analyzing coupling rc interconnect delay based on "effective capacitance" is presented.
该设计方法采用N2分离通路的模块化无阻塞互连结构，实现起来较简单且允许入线具有较高的传输速率。
The method uses a N2 separate access, modularization and nonblocking interconnection frame. The frame is easily fulfilled, and its inputs have high transfer rate.
提出一种基于工艺随机扰动的非均匀rlc互连线串扰分析方法；同时建立了互连线随机扰动模型。
A new method was proposed for the analysis of crosstalk of non-uniform RLC interconnects with stochastic process variations, and a stochastic perturbation model was proposed.
分析结果表明，该方法很适合高速集成电路芯片内互连线的计算机辅助分析。
The results show that this method is very fit for the computer aided analysis of on chip interconnects for the high speed VLSI.
信息技术。开放系统互连。合格试验方法学和框架。第5部分：合格评定过程用试验室和试验委托人的要求。
Information technology. open systems interconnection. conformance testing methodology and framework. part 5: requirements on test laboratories and clients for the conformance assessment process.
信息技术。开放系统互连。合格试验方法学和框架。第5部分：合格评定过程用试验室和试验委托人的要求。
Information technology. open systems interconnection. conformance testing methodology and framework. part 5: requirements on test laboratories and clients for the conformance assessment process.
应用推荐