详细阻抗与传输特性，包括二次参数文字，可以简单而快速的评估或测试。
Detailed impedance and transmission characteristics, including secondary parameter derivations, can be simply and quickly evaluated or tested.
清单12演示这个脚本的第二次迭代如何处理这些参数。
Listing 12 shows how the second iteration of this script processes these parameters.
如果需要接收方答复，那么第二次使用该表单时将发送两个参数to和unid。
The second time, if the recipient should reply, two parameters are sent: to and unid.
本文改进了带线性约束0 - 1二次规划问题的罚参数下界。
In this paper, penalty parameter for linearly constrained 0-1 quadratic programming is improved.
对f的第二次调用的可变列表只包含 8.333，而a变成第一个参数。
The second call to f will have the variable list containing only 8.333, while a becomes the first argument.
通过二次通用旋转组合试验，得到了该清选系统的最优运动参数。
We obtained the optimal movement parameters of this cleaning system by quadratic universal rotary assembly experiment.
同时，采用三维CAD软件二次开发的方法开发参数驱动生成模块。
Meanwhile, the parameter driven module is developed using the secondary development method for CAD software.
介绍了利用UG软件的二次开发功能，实现UG环境下制图参数的保存和快速设置的原理和方法，并给出主要程序段。
The principle and procedure of saving and quick setting of the drafting parameters in UG by using secondary development of UG are introduced in detail.
着重于初生晶种制备工艺参数的试验研究和二次晶种存在的探讨；
The technological parameters for making first crystal seeds and the influence of existence of secondary seeds have been studied.
研究了差压铸造不同工艺参数对A357合金二次枝晶间距的影响。
The effect of counter-pressure casting parameters on secondary dendrite arm spacing (SDAS)of A357 alloy was studied.
对影响循环的主要参数分析表明，二次冷媒的冷凝温度及膨胀机进口压力对循环的效率影响很大。
From an analysis of the cycle influencing main parameters it is ascertained that the condensing temperature of secondary cooling medium exercises a very great influence on the cycle efficiency.
利用3因素5水平的二次旋转设计，对排列在旋成体后部的仿生凹坑表面参数进行优化。
A quadratic rotatable design with 3 factors and 5 levels for each factor was used to optimize the parameters of the dimpled surfaces.
对改进算法中二次滤波的噪声方差参数选取采取一种计算反卷积剩余误差的方法，用在第二次滤波步骤中。
The paper also gives an algorithm for estimating the variance of the imaging noises by computing residual deconvolution errors, which is used in the second step of the modified Wiener filter.
针对二次调节伺服加载试验台转速控制系统，分析了参数变化和耦合干扰对系统控制性能的影响。
The influence of parameter changes and coupling disturbances on control property was analyzed in the rotational speed control system of the servo loading test equipment with secondary regulation.
反馈部分为参数自调整模糊控制器，终点的计算采用二次曲线拟合法。
Feedback control is a parameter self tuning fuzzy controller and the burn through point is calculated by quadratic curve method.
本文主要研究了具有不确定参数的线性二次型高斯问题(LQG)的对偶自适应控制问题。
This thesis discusses the dual adaptive control in Linear Quadratic Gaussian (LQG) with uncertainty parameters problem.
本文从一般强度理论出发导出各向异性材料应力形式张量多项式强度理论，根据强度准则的外凸性得到应力二次形式强度准则的强度参数限制条件。
A set of inequality constraint conditions of the strength parameters is derived from the convexity of the strength criterion, which is expressed in a quadric form in terms of stress components.
利用ADAMS二次开发语言，设计了一个可视化界面，可对步兵战车的重要参数进行修改。
With the developing language of ADAMS software, it also designed the interface to modify the important parameters of infantry fighting vehicle.
分析了各种流动参数和几何参数对轴向速度、二次流动、壁面摩擦力、摩擦系数比的影响。
We analyze the effects of the flow parameters and the geometrical parameters on the axial flow, the secondary flow and the friction.
通过对AZ31镁合金铸棒在不同变形参数下进行一次变形和二次变形，并对其组织演变过程和力学性能进行分析讨论。
The two-stage deformation was processed to AZ31 alloy as cast at different parameter condition, and structure evolution and mechanical property was analyzed.
本研究探索了IC反应器处理酒糟废水的初次启动和二次启动过程，并对系统运行的工艺参数和反应器内颗粒污泥的性质等进行了研究。
The first and second start-up of the full-scale IC reactor in treating the alcohol production wastewater and the characteristics of granular sludge during start-up were studied.
根据系统参数，在二次型指标中适当选择状态加权矩阵q可以将LQ问题的状态反馈解表成输出反馈的形式。
Choosing the proper state weight matrix Q in the LQ index by the system parameters, we can express the state feed-back solution of the LQ problem in the form of the output feedback.
实践证明，遵从参数化原则进行二次开发工作，有助于提高软件设计效率，并最大限度地减少重复工作。
The practices proves that Abiding by parameterized rules to conduct secondary development contributes to improve software design efficiency and reduces repeated work with maximum limit.
该方程组不仅包含二次及三次非线性项，而且体现了参数激励与外激励的联合作用。
The equations of motion of beam, which includes not only quadratic and cubic nonlinearities but also parametric and forced excitations are derived using Kane's equation.
然后通过调节同伦参数，对每个不同的参数用复制子等式进行求解，从而得到原二次规划模型近似解。
The approximation of the primal quadratic optimization model can be obtained by solving the regularized one and adjusting the homotopy parameter.
在已加工表面粗糙度研究领域引入回归正交分析，采用多元二次回归正交设计得到了数控车削参数与已加工表面粗糙度的回归预报模型。
At realm of surface roughness of machined surface, forecast mathematical model is set up by using quadratic regression orthogonal design between NC turning parameter and machined surface.
采用集中参数处理方法，把直流蒸汽发生器二次侧按流体相变分区，建立了动态热工水力模型。
The dynamic thermal hydraulic model of Once Through Steam Generator (OTSG) is developed, Which characterized by lumped parameters with moving boundary.
本文通过实例介绍用MATLAB设计线性二次型最优控制问题的基本方法，并研究了参数变化对最优控制系统设计的影响。
The paper tells design method of linear quadratic optimal control applying MATLAB with practical example, and discusses parameters inserted to optimal control system.
本文通过实例介绍用MATLAB设计线性二次型最优控制问题的基本方法，并研究了参数变化对最优控制系统设计的影响。
The paper tells design method of linear quadratic optimal control applying MATLAB with practical example, and discusses parameters inserted to optimal control system.
应用推荐