目的：建立乳化溶剂挥发法制备黄芩苷纳米粒的方法。
Objective: To develop an emulsion solvent evaporation technique for the preparation of Baicalin nanoparticles.
用乳化溶剂蒸发法制备了羟丙甲纤维素酞酸酯水分散体。
Hydroxypropyl methyl cellulose phthalate aqueous dispersion was prepared by emulsion-solvent evaporation.
目的：探讨乳化溶剂挥发法制备茴香油聚乳酸微胶囊粒子的最佳工艺。
Objective To study the best preparation of fennel oil polylactic acid microencapsulation by emulsifying solvent-evaporation process.
在此基础上，采用乳化溶剂挥发法和液致相分离相结合制备了聚乳酸多孔微球。
Moreover, PLA porous microspheres were fabricated by solution induced phase separation based on emulsion-solvent evaporation.
并提出了防止溶剂乳化的具体措施，如增大分水箱的容积，防止带有湿粕的混合油进入分水箱等等，对今后的工作具有一定的借鉴作用。
The solvent emulsion can be prevented by increasing the capacity of water separator, avoiding the miscella with wet meals entering the water separator and so on.
研究了铜溶剂萃取时，萃原液中固体微粒含量对分相和界面乳化的影响。
The effect of solid particle content in feeding liquid on phase disengagement and interfacial emulsion in copper solvent extraction is studied.
结论溶剂乳化法适用于水飞蓟素固体脂质纳米粒的制备。
ConclusionThe solvent - emulsifying method is suitable for preparation of silymarin SLN.
在注射给药方面，泊洛沙姆188可作为增溶剂、乳化剂以及基因药物的载体。
As a safe excipient, poloxamer 188 is often used as solubilizing agent, emulsifying agent and gene carrier in injection.
食用乳化剂和增溶剂是两类非常重要但又易混淆的食品添加剂。
Food emulsifying agent and solubilizer are the two kinds of very important but easily confused food additives.
采用乳化结晶法，研究了粗蒽精制过程中溶剂、温度、助剂及分离时间的作用。
The effects of solvent, temperature, additive and separation time on the refinement process of crude anthracene by using emulsion-crystallization were reported.
研究了溶剂比、乳化剂与稳定剂用量、改性单体及功能单体的用量、引发剂及交联剂用量等因素对粘接性能的影响。
The effects of the ratio of solvents, the quantity of emulsifying agents and stable agent, the amount of modification monomer and functional monomers and initiator on the properties were studied.
经溶剂、乳化剂、稳定剂等选择性试验，确定最佳配方和质量技术指标。
Through experiments on the selection of solvents, emulsifiers and stabilizers, the best formula and quality standard is finally confirmed.
介绍合成柔软型增稠剂方法、反应单体、乳化剂、有机溶剂、交联单体的选择以及合成工艺。
The article discusses the synthesis method of a soft type thickening agent, selection of reactive monomers, emulsifier, organic solvent, and cross-linking monomers.
而采用在溶剂相中改性接枝再乳化分散的方式，分子链中软硬段的微相分离加剧，热稳定性提高。
When modification graft before emulsion dispersion in solvent was adopted, micro phase separation of soft and hard segments in molecular chains was enhanced greatly and its thermo-stability improved .
着重讨论了40 %毒死蜱乳油的组成和制备方法， 溶剂的选择，乳化剂的筛选，按此配方生产的乳油药效好。
Composition and preparation of 40/% chlorpyrifos emulsion with good effect were discussed including screening of solvent and pesticide cream.
结果：在月见草油的自乳化制剂处方中，当非离子表面活性剂选用吐温- 85、潜溶剂选用丙二醇时，可以获得较好的乳化效果。
Results: In the formulation of evening primrose oil, taking Tween 85 as the non ionic surfactant and propylene glycol as the co surfactant can get the best effect of emulsifying.
研制一种由溶剂、乳化剂和其他助剂构成的油墨清洗剂。
The drinking ink cleaner is composed of solvent, emulsifier and other additives.
本文研制的醋酸丁酸纤维素(以下简称CAB)皮革光亮剂由CAB，增塑树脂、溶剂、乳化剂等组成，包括水乳型和溶剂型产品。
Cellulose acetate butyrate (CAB) leather glossy agent is comprised of CAB, plastic resin, solvents, emulsifier, etc. The products are available in aqueous and solvent forms.
本文叙述了以废弃的聚苯乙烯泡沫塑抖为原料，选择合适的混合溶剂和乳化剂制取水乳性瓦楞纸箱防潮涂料的机理及过程。
This paper discuss the mechanism and process of making emulsive moistureproof dope for corrugated board with scrap polystyrene foam by selecting proper commix impregnant and emulsion.
方法：采用加入增溶剂，使供试液成为均匀的乳化状态。
Methods: By adding dissolution enhance to make test solution to be homogeneous.
方法以硬脂酸为载体采用溶剂乳化法制备水飞蓟素固体脂质纳米粒，并用葡聚糖凝胶层析法测定其包封率。
Method Silymarin SLN was prepared through the solvent-emulsifying method with stearic acid as the carrier, and the encapsulation rate was determined with the Sephdex gel chromatogram.
不同组分的MPEG-PCL分别作为乳化剂和药物载体，通过溶剂挥发法制备得到紫杉醇纳米粒。
MPEG-PCL with different composition (MPEG/PCL ratio) were applied as emulsifier and drug carrier, respectively, in the solvent evaporation technique to fabricate taxol-loaded nanoparticles.
讨论了树脂基料、溶剂、乳化剂的选取及配比等因素对涂层附着力的影响，确定了处理剂的最佳配方。
The influence of the varieties and amounts of binders, solvents and emulsifiers to the adhesion between coating film and polypropylene is discussed. The optimized formulation is designed.
讨论了树脂基料、溶剂、乳化剂的选取及配比等因素对涂层附着力的影响，确定了处理剂的最佳配方。
The influence of the varieties and amounts of binders, solvents and emulsifiers to the adhesion between coating film and polypropylene is discussed. The optimized formulation is designed.
应用推荐