剩余的人没有火星和天王星之间的主要相位。
分析了该工作方式的特点及主要相位误差，给出了相应的误差补偿方法。
Based on the analysis of the characteristics and main phase errors of this mode, the compensating methods for these errors are given.
这如同六月提供一个主要的相位，而不是各种积极的连结。
It is as if June offers one major aspect rather than a variety of active connections.
DDS技术是一种先进的频率合成技术，其主要优点是易于程控，相位连续，输出频率稳定度高，分辨率高。
DDS is an advanced technique on frequency synthesis, whose primary advantages are controlling facility, continuous phase and fine frequency resolution.
自聚焦主要由两个重要步骤组成，即相位误差估计和相位误差校正。
Autofocus generally encompasses two distinct steps, i. e. phase error estimation and phase error compensation.
本文主要研究了多载波相位编码(MCPC)脉冲信号，以及具有低峰值-平均包络功率比(PMEPR)的多载波脉冲串的设计。
This thesis mainly discusses the multi-carrier phase code (MCPC) pulses signal, and the design of pulses trains with low peak-mean envelop power ratio (PMEPR).
合成孔径声呐成像中，主要通过自聚焦校正剩余相位误差。
In synthetic aperture sonar imaging, the residual phase error is mainly corrected via autofocus.
在半导体激光正弦相位调制干涉仪中，光源输出光强的变化是测量误差的主要来源。
In sinusoidal phase modulating laser diode interferometer, the main error source is the variation in output light intensity of light source.
本文提供了关于电桥相位自动平衡研究的主要结果。
This paper provides the major results of research for the automatic phase balance of AC bridge.
为了提高用于小电流测量的电子式电流互感器的精度，必须对传感头进行优化，主要解决传感头的相位补偿问题。
In order to improve the precision of electric current transducer used to measure small current, the sensing head must be optimized, mainly to resolve difficulty of phase compensation for sensing head.
LCVCO设计的主要目标包括低相位噪声，宽调谐范围和低功耗等。
The main objective of LCVCO design is low phase noise, wide tuning range and low power consumption.
相位编码信号是低截获概率雷达信号的主要形式之一，能够提高雷达的生存能力。
As the major type of signals of LPI radars, the phase-coded signals can enhance the radar survivability.
证明了光纤的交叉相位调制是限制激光混沌在光纤传输中同步的主要原因，导出了系统传输的非线性相移。
Chaotic laser synchronization is mainly limited by cross phase modulation in the fiber and the propagation nonlinear phase shift is educed.
该方法的主要装置包括一个用于控制刻划机运动的光栅干涉仪和一个相位扫描机构。
The main devices of the method include a grating interferometer, which controls the ruling engine motion, and a phase scanning mechanism.
相位失配误差是声强测量系统的主要误差源，仅靠提高仪器的精度很难消除这一误差。
The phase mismatch error is the main error source of sound intensity measurement system. It is difficult to eliminate this error only by upgrading the accuracy of instrument.
重建语音的听觉感知效果主要取决于附加相位对频率的导数的起伏幅度。
The auditory perception effect of the reconstructed speech is mainly dependent on the amplitude of the derivative of the additive phase with respect to frequency.
介绍了相位差调制器及测量器的原理框图、主要性能指标及电路实现。
In this article, the schematic diagram, main specifications and the realization of the circuits of the phase differential modulator and measurer are described.
该算法的主要应用领域为卫星定位信号和直序扩频测距信号PN码相位的精确测量。
The algorithm is applicable to precise measuring of the PN code phase of satellite positioning signals and spread-spectrum ranging signals.
电光相位调制器是数字闭环光纤陀螺系统中的关键部件，主要用于产生偏置相移，使整个闭环系统始终工作在零点附近。
Electrooptic phase modulator is critical part in digital closed-loop FOG system, the function of which is to create bias phase, so that to make FOG working around zero point.
但是由于雷达技术的提高，对于系统的性能有了更高的要求，相位噪声成了主要限制雷达系统性能的因素之一。
As radar technology has been improved, system performance hasn't followed the step yet. And phase noise becomes one of the major factors that pull back the development of radar system.
主要从事环境微量污染物检测方法及污染机理研究，非线性光学相位共轭技术研究。
Main interests are research on detection methods of trace pollutants, mechanism of environmental pollution and nonlinear optical phase conjugation.
锁相环路是一种能实现相位自动锁定的控制系统，主要用于频率合成及跟踪解调系统。
The phase- locked loop is one kind of control system which is able to achieve phase automatic lock, to compose frequency and to trace demodulation system.
主要应用傅立叶变换方法计算各种信号的振幅谱和相位谱。
This paper presents computation of the signal's amplitude spectrum and phase spectrum the Fourier transform.
数字化相位生成载波(PGC)方法是实现光纤干涉仪大动态范围、高精度信号检测的主要手段。
Digital phase generated carrier (PGC) is the key method for larger dynamic and high sensitivity detection of optical fiber interferometers.
介绍了一种主要由8051单片机、MAX7219驱动的LED数码显示电路构成的相位差测量仪。
A new instrument which can measure the phase difference by 8051 microcontroller and LED digital display current driven by MAX7219 is introduced.
这种处理方法主要通过两种数据处理方法的联合来加以实现：即单点位方法和载波相位滤波方法的联合。
It is realized by combining two data processing methods, i. e. single point positioning method and carrier phase filtered method.
通过对CA15和EQ 6100型发动机配气相位的计算，分析了影响配气相位的主要因素。
Through the valve timing calculation for CA15 and EQ6100 engines, some main factors influencing the valve timing are analyzed.
分析了弹道相机系统的构成，并对弹道相机的最主要部分——旋转快门相位控制器工作原理进行剖析。
The composition of trajectory camera and working principle of the phase controller of revolution shutter are analyzed.
本文主要研究MPSK信号的载波频偏和相位误差的估计和恢复算法。
This thesis deals with the algorithms of carrier frequency offset and phase error for MPSK signal.
其主要功能就是通过改变码相位、多普勒频移、载波和信噪比来模拟卫星轨道上真实卫星发射的信号。
Their main function is to simulate the satellite signal from the really satellite on the satellite orbit through changing code phase, Doppler shift, carrier and signal-to-noise ratio.
应用推荐