详述了测厚原理、电路及主控单元接口电路。
It also describes the principle of thickness measure, circuit and connected circuit of major control unit.
整个系统采用了8098微处理器作为主控单元。
The whole system has been used 8098 microprocessor as control unit.
硬件分为三大部分，逆变器、检测电路和主控单元。
The hardware circuit comprises three parts: inverter, detecting circuit and main control unit.
安装壁挂式主控单元控制箱，并敷设交直流电源电缆二条。
Mount main control unit and laying cable (2 core cable, two PCS) for unit AC and DC power supply.
研制了以AT89C51单片机为主控单元的深静脉血栓预防仪。
The paper introduces the procedure of development of the DVT prevention apparatus taken the AT89C51 as the main control unit.
主控单元的EEPROM存储自身重要数据，保证精确输出最优电压。
EEPROM of the master control unit stores some important data, and ensures the accurate output of the optimum voltage.
安装壁挂式接线箱，敷设20芯电缆并接线由接线箱至主控单元一条。
Mount junction box and laying cable (20 core cable, 1 piece) from junction box to main control unit.
这种模块传送信号的速度比传统系统中来自主控单元的稳定电压信号要快。
This module transmits a signal of higher speed than the conventional system in the region where the voltage signal from the main unit is steady.
介绍一种基于PLC为风力发电机主控单元，适于风电场集群控制的有效方法。
This paper introduces an effective method suitable for wind farm central control which USES PLC as the wind turbine generators main control unit.
本文介绍一种以可编程控制器为主控单元的脉动真空蒸汽灭菌器的电气控制系统。
This paper introduces an automatic control system with PLC for pulse vacuum steam sterilizer.
以MCU作为主控单元，设计了全自动织领机控制器，介绍了其硬件结构、软件功能。
MCU based collar machine controller is introduced in this article, including its hardware structure, software functions and the implementation.
主控单元的主控芯片选用了ARM芯片，并配以数据存储电路、按键和液晶显示接口电路。
ARM chip is chosen as the master chip of main control unit, main control unit includes data storage circuit and key and LCD display interface circuit besides.
在详细分析偏航控制系统控制要求的基础上，采用单片机89c51作为主控单元，设计了风电机组的偏航控制系统。
On the basis of analyzing the control process completely, the thesis designs yaw control system for WTGs using 89c51 single-chip computer as a main control unit.
在安全距离的基础上，对主控单元子系统和雷达测距子系统进行了软、硬件设计，解决了系统功能所需要的关键技术。
Based on the safety distance model, the software and hardware of the main control unit of sub-system and radar ranging of sub-system is designed, the key technologies is solved.
描述了系统主控单元的选择及系统的整体设计，分析了系统所采用滚动编码的加密原理并对滚动编码与固定编码的安全性作了比较。
Also, this paper describes the main control unit and the whole design of the system, and analyzes the encryption principle of the code hopping encoder adopted by this system.
主机采用STM 32f 103 V 8处理器为主控单元，实现仪器操控、无线收发、报警指示、远程控制及工作状态显示等功能。
The host processor main control unit using STM32F103V8 achieve instrument control, wireless transceivers, alarm indicator, remote control, and work status display.
系统采用SPCE061 A微控制器为主控单元，特别指出了软件设计中需注意的几个问题，最后利用软件对实验数据进行误差修正。
SPCE061A MCU is adopted as central control unit. Especially, we point out several problems which must be paid attention to in the program, and correct the error of experiment data in the end.
分别在驾驶室各处安装报警延伸复位按钮盒4套，敷设电缆线并接线，由接线箱或主控单元至各延伸报警复位按钮盒电缆，共计：电缆四条。
Mount remote reset unit (4 PCS) in different places on the bridge and laying cable (2 core, 4 PCS) from remote reset unit to main control unit or junction box.
化探数据系统分析可以提取与不同成矿单元尺度水平相应的信息，其中包括矿床主控因素的信息。
The system analysis of geochemical data can help information in accordance with the scale level of different mineral units including main ore-controlling factors.
针对传统无线通信是单向传输的局限问题，设计了基于nRF 905射频芯片的双向通信系统并以单片机为主控制单元。
Based on the traditional wireless communications limited transmissions is limited, based on the NRF905 rf chip design of two-way communication system and MCU control unit mainly.
电子控制单元还可以智能的将液压缸的行程和载荷信号、通过实时网络传送给其他电子单元及主控计算机。
The electronic control unit can also intelligently transfer stroke and load signals of the hydraulic cylinder to other electronic units and a master control computer by real-time network.
主控制器和现场控制单元的通信协议设计简单、易于实现。
The communication protocol between master control units and data units is simple and easy to implement.
介绍一种基于16位单片机DSPIC33FJ64GP710为主控芯片的32路AR-TU-M32型遥测单元设计原理，以及该产品主要技术指标与应用案例。
The design principle, main technology specification and application of 32-channel ARTU-M32 telemetry unit based on 16 bit DSPIC33FJ64GP710 were introduced.
主控制器单元，带有两通道静电计和伺服控制器。
Main control Unit, two-channel electrometer and servo controller.
主控计算机与各lcu中的监控单元和保护单元通过CAN总线通信，LCU中的PLC通过RS- 485接口与主控计算机通信。
Host computer communicates with the monitor unit and the protection unit of LCUs through the CAN bus. PLC in LCU communicates with host computer through the RS-485 port.
采用CMOS集成电路完成主控逻辑单元，结合斜井人车的运行特点，对实现保护的各环节进行了综合阐述。
The CMOS integrated circuit is applied to form the main control logic units. The links of protection realization are expounded in the light of the running characteristics of man-riders.
本人参加了上述第一个项目软件无线电系统的整体设计，完成了主控与基带信息处理模块的硬件设计、部分软件设计调试，以及第二个项目的主控与基带处理单元模块的调试、最终完成整机调试和指标测试。
The thesis expounds the cell design and timing design of the FPGA circuit in main controlling and baseband signal processing module, and develops the hardware of it, and programs part of the software.
所述的主控制器具有一延时单元。
所述的主控制器具有一延时单元。
应用推荐