某些ADC配置系统采用主从式模型，而其他一些系统则采用多主机模型。
Some ADC configuration systems follow a master-slave model while others follow a multi-master model.
主从分布式设计能提高系统的可靠性和实时性，从而能确保大型透平机械的安全运行。
The master-slave arrangement applied in the design improves the trustworthiness and real-time characteristic of the system which enhances the reliability of turbine operation.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
介绍了一个半闭环主从式数控系统在普通机床数控化改造中的设计及实现。
A master slave mode of CNC system with a half closed loop control in the numerical control transformation of a machine tool was designed and implemented.
系统设计为主从式两级微处理器控制结构。
The system is of the controlling structure of subordinate two-poles microprocessor.
该系统采用DSP与PC构成主从式并行结构，共享存储器实现双机高速数据通信。
In this system the master-slave parallel structure is composed by DSP and PC. The dual machine high speed communication is implemented by the Shared memory.
本文提出了一种适用于一般空间曲线、曲面数控加工的离线插补原理，并探讨了书这一原理应用于主从式数控系统的理论和实战问题。
This paper introduces a theory based on off-line interpolation suitable for NC machining to generate curved line or face, with a primary-secondary computer NC system.
天线扫描系统采用主从式双计算机结构及零位检测装置，提高扫描精度；
The scanning accuracy is improved by adopting structures of master slave computer and zero detecting.
基于数字信号处理器(ADSP21020)，建立了一种主从式实时电视跟踪系统。
Based on the Digital Signal Processor (ADSP21020), a principal and subordinate structure real-time TV tracking system is established.
本系统采用主从式结构，主站微控制器以S3C 2410微处理器为核心，从站微控制器以at89s52单片机为核心。
The system used the master-slave structure, the master microcontroller based on S3C2410 microprocessor core, the slave used to AT89S52 microcontroller core.
对一种可用于配电自动化管理的基于智能通信控制器的主从式dcs系统进行了研究和设计。
A kind of DCS system that is based on intelligent communication controller and can be used in the power distribution automation management is researched and designed.
根据系统的实时性和跟踪精度指标，设计了主从式结构计算机控制系统。
Based on the real time and tracking accuracy indexes, the master-slave computer control system is designed.
主从比例系数是主从异构式机器人系统的一个重要参数。
The proportional coefficient of the master and slave manipulators is an important parameter for an isomeric robotic system.
本文叙述了主从式温度测量控制系统的基本组成、工作原理、程序控制框图和系统的特点。
In this paper, the basic constitute, working principle, program chart and character of the main-subsidiary system measuring and controlling temperature were given.
本文在对CNC系统进行面向对象分析的基础上，建立了以PC机作为上位机，DSP运动控制器作为下位机的主从式数控铣床系统。
Based on the object-orient analysis of CNC system, the paper proposes a design idea of master-slave CNC system, which builds with PC as upper chip and motion controller with DSP as lower chip.
同时在文章中还介绍了一种分布式数控系统任务分配的数学方法及主从分布式数控系统的通讯协议等问题。
A mathematical method of tasks assignment for distributed CMC system and the communication protocol of master-slave distributed CNC system etc are also introduced.
在总线结构的分布式测控系统中，当系统实时性要求较高、突发性较强时，主从通信方式往往不能适应需要，而需要采用竞争式通信。
In distributed measurement and control system with bus structure, master slave communication may be replaced by race communication, when real time and burst are needed.
最后设计应用于主从式控制系统的通讯程序，这个程序是基于MODBUS协议的。
At last, the communication program applied in Master-Slave control system base on MODBUS protocol is designed.
实际应用中主从结构简单，在分布式计算机系统中经常使用。
The master slave structure is simple and convenient in practical use, so it is often used in the distributed computer system.
本文设计了一种用于饲料生产设备的主从式控制系统，系统由工控机和PLC组成。
This paper presents a principal and subordinate control system for feed equipments. The control system is combined with a industrial control computer and a PLC.
介绍一种用VB工具软件开发集散型控制系统的方法，并用主从式通信控制方式解决了通信网络中的总线竞争问题。
This paper introduces means to develop a distributive control system with VB language. With main follow control manner, the problem of bus competition is overcomed.
介绍在复杂的主从分布式系统中提高主机串行通讯与背景程序实时性的一种方法。
This paper introduces a method of improving the real? Time on main single chip computer serial communication and the background programs in the complicated distributed system.
针对整流桥测试设备中存在的功能不足，设计了以PC机为主机，分布在现场的各个单片机系统为下位机的主从式结构。
The SCMs mainly perform classification and testing for each rectifier and the PC accomplishes data display, counting, storing, printing and other functions about the test.
新系统采用主从式多服务器技术把数据相同的多个OLAP服务器有机地组成一个系统向客户提供服务。
Several single OLAP servers with the same data are combined systematically into the new system by adopting the technique of principal and subordinate multi-servers.
本系统采用分布式计算机控制系统，由一台PC机和多台单片机构成主从式总线型结构。
This system USES the distributed computer control system and is made of a PC and several SCMs, which show a principal and subordinate structure with bus style.
该系统采用主从式上下两级微机网络结构，上位机完成系统的管理，控制下位机执行具体的操作。
Two levels master-slave microcomputer network is applied to this system. The master computer manages the system and controls the slave microcomputer to excuse the operations in details.
本系统采用两级微机控制，主从分布式监测系统结构。
This system is controlled by a two-level computer, and it is a distributed inspecting system with a principal and subordinate structure.
讨论了一种用于两轴半立式铣床的PC -DSP主从式计算机数控系统。
This paper describes a computerized numerical control system for a two and a half axis upright numerical control milling machine.
双信道系统的同步质量相比主从式单信道系统会有明显下降，而进一步增加信道数量，同步品质并不发生显著改变。
The synchronization performance of dual-channel system decreases obviously compared with master-slave single channel system, and changes little when the channel number increases.
双信道系统的同步质量相比主从式单信道系统会有明显下降，而进一步增加信道数量，同步品质并不发生显著改变。
The synchronization performance of dual-channel system decreases obviously compared with master-slave single channel system, and changes little when the channel number increases.
应用推荐