该方法打破了传统的设计规律，为验证该方法的可靠性进行了模型试验。
It has broken the conventional law of design. A model experiment was conducted in order to demonstrate the reliability of this method.
为验证该方法的准确性，以某型飞机自动驾驶仪飞控盒的几种主要故障为诊断源，仿真研究了所设计的综合故障诊断方法。
In order to validate validity of the designed fault diagnosis method, simulation researches are conducted with the major failure of certain kind aircraft autopilots flying-controlled box as the ex.
并通过实验验证了该方法对系统改进的有效性，为声纹识别技术的应用提供了一个好的技术支持。
The validation of this method for improving the system was verified through experiment, a good technique support for the application of the technique of voice recognition was provided.
最后以世界罕见的洒勒山大滑坡为例，验证了该方法，计算滑面与实际滑面基本平行。
Finally, We verify this method by Saleshan Landslide being famous which is so big that is rarely seen through the whole world.
在8个汉语高频多义次的测试中取得了平均准确率为84.52%的较好的效果，验证了该方法的有效性。
The result of average accuracy 84.52 % is gotten in the experiments on 8 ambiguous words, so the method has high value in research.
本文采用实验的方法，统计、验证该方法的可行性及有效性，以期为之后的研究提供更为可靠的数据和参考意见。
This paper will statistics and verify its feasibility and effectiveness by experiments, with a view to provide a more reliable data and reference for the researchs later.
通过实际项目的验证，该方法为基于可变性建模的模型内容复用提供了有效支持。
Being used in a real project, the method provides effective supports for reusing model contents based on variability modelling.
在8个汉语高频多义次的测试中取得了平均准确率为84.52%的较好的效果，验证了该方法的有效性。
The experiments on 8 ambiguous words we get the result of average accuracy 84.52%, which show that the method in this paper is very good.
通过实例进行了对比验证，该模型为确定装备的最佳检测周期提供了一种简便易行的方法。
By verifying of concrete examples, it shows that the model can serve as a easy and feasible way of determining the optimum detection cycle.
试验结果验证了该方法的可行性，为利用瞬时转速信号检测发动机失火提供了条件。
The experimental results verified the accuracy and feasibility of the denoise method to process the momentary speed signal for engine misfire detection.
以铁路客车内装模块化配置设计为应用，验证了该优化模型及其求解方法的可行性和有效性。
The modular configuration design of railway passenger car interior decoration is taken as an example to illustrate the feasibility and validity of the model and it's solving method.
实验证明，该方法大大抑制了分布电容的危害，为电磁成形技术的应用开辟了更广阔的前景。
Experiment shows that this method restrains greatly the harm of distributing capacitance and pioneers the condition for the development of electromagnetic forming technology.
以万能车床为例，使用该方法进行模块划分，进一步验证了该方法的可行性。
The validity of the method is proven using a case study on the division of a lathe into its hierarchical modules.
通过实验进行验证，结果表明该方法是可行和有效的，为商家提供了一种新的分析思路。
The experimental result shows that the decision tree method is feasible and efficient, providing a new analysis means for businessman.
以钢坯吊具钳板为例，验证了该方法的实用性和有效性。
To billet slings clamp plate, for example, this method was proved to be practical and effective.
实验部分以万方数据库中部分文档数据为例验证了该方法的有效性。
Finally the effectiveness of this method is proved by some documents of WanFang data in experimental section.
最后以某型歼击机结构故障为例进行了仿真验证，结果表明该方法确能有效的检测出歼击机的各种故障。
Finally, the proposed scheme is demonstrated using the model of a fighter and the results show that the method is an effective tool for structural fault detection of the fighter.
以匀加速-匀速-匀减速运动为例，分析了测量误差与加速度之间的关系，仿真结果验证了该方法的可行性。
From a numerical simulation on a practical possible mode: uniform acceleration-uniform speed-uniform deceleration we obtain the relationship between the measurement error and the acceleration value.
以金堆城露天矿为例，给出了计算汽车运输能力的新方法，并从数理统计的角度对其进行了分析，从而验证了该计算方法的合理性。
According to truck transportation in Jinduicheng Molybdenum Corporation, a new approach to determine the truck capacity were provided. Its statistics analysis proves that the approach is reasonable.
经验证，该方法为一种快速、可靠的方法。
The model has been proved as one kind of fleetness, reliable appraise method by example.
该方法在电梯产品大批量定制设计中得到应用验证，可快速响应客户需求，为实现大批量定制生产提供基础。
It had been applied in mass customization of elevator products. Experimental results show that the method provides an efficient way to respond customer requirements rapidly for mass customization.
为了验证该方法的有效性，以核电厂设备蒸汽发生器u形管破裂等故障为例，进行了仿真实验研究。
In order to test the validity of the method, the inverted U-tubes break accident of Steam Generator and etc are used as examples, and many simulation experiments are performed.
以自动豆浆机绿色设计为例，对该方法进行了实例验证。
Green design of automatic soybean milk maker was used to exemplify this method.
通过举例，验证了该评估方法的有效性，为核安全管理和决策提供了定量依据。
Using it the quantitative basis for nuclear safety management and decision is provided.
为验证方法的正确性，采用一个标准梁算例给予验证，算例表明该方法对结构的损伤位置和损伤程度具有准确的识别能力。
A standard beam example is adapted to verify the proposed method. It is shown that the method is effective in diagnosing damage locations and degree.
对该模型低磁钢板及线圈的磁通密度和涡流损耗进行了试验与计算分析，得到了一些有价值的试验和分析结果，为磁场计算和三维涡流损耗分析方法提供了验证手段。
Calculations and experiments are carried out on both magnetic flux density and eddy current loss of the non-magnetic steel plate and of the coil in this model.
对该模型低磁钢板及线圈的磁通密度和涡流损耗进行了试验与计算分析，得到了一些有价值的试验和分析结果，为磁场计算和三维涡流损耗分析方法提供了验证手段。
Calculations and experiments are carried out on both magnetic flux density and eddy current loss of the non-magnetic steel plate and of the coil in this model.
应用推荐