为纤维增强混凝土中纤维的长度分布和三维取向分布设计了图像处理系统，详细叙述了图像处理系统的设计方法和编程思想。
An image analysis system is designed for the measuring of fiber length distribution and fiber orientation distribution in three dimensions. The detail of programming method is written up.
公司的工程师们设定目标决定用碳纤维增强塑料，这样成本就减少为原来的十分之一。
Company engineers have set a goal of a tenfold reduction in production costs for CFRP.
亚克力表面为聚丙酸甲脂，背面采用树脂石膏加玻璃纤维，以增强其硬度。
The surface is yakeli get together fat of third acerbity armour the reverse side uses colophony gesso to add fibre glass in order to enhance its hardness.
为减小筏板基础的厚度，本文提出了钢纤维局部增强的筏形基础。
This paper gives raft foundation partially reinforced by steel fiber to reduce its thickness.
通过上述工作，为从机头口型几何参数来控制增强胶管中的短纤维取向分布建立了基础。
By aforementioned work, the base therefore can be set up in controlling the short fibre orientation distribution in reinforced pipe by the change of the die's geometric parameter.
进行了相关的基础实验，为有广泛适应性的连续化增强用生物活性纤维的制备奠定理论基础。
Correlative basic experiment was carried through. Theory and evidence for fabricating continuous bioactive fiber for reinforcing composition with extensive adaptability were established.
DPFC隔热垫块是以PPS树脂为基体，以中空玻璃微珠、玻璃纤维作增强材料制得的。
DPFC heat insulated pad is based on PPS resin with middle-empty glass micro - bead and glass fiber as reinforcement.
介绍了采用可生物降解热塑性PHBV 树脂为粘结基体相，天然纤维作增强相，通过热压工艺开发绿色板材。
This paper introduces the technology of biodegradation by using natural fiber as buildup cross - purposes and PHBV polyester as felt cross - purposes through the heat press process.
采用碳纤维和钢纤维为增强材料、硼酚醛树脂为基体，通过模压成型制得新型混杂纤维增强树脂基摩阻材料。
A new type of friction material was prepared with carbon fiber and steel fiber as reinforcements and FB polymerized phenolic as matrix resin by mould pressing technology.
采用混杂纤维作增强材料并以改性酚醛树脂为基体制成提速列车用的制动闸片。
A new type of brake pad using hybrid fibers reinforced modified phenol-formaldehyde resin matrix was produced.
以玻纤填充质量分数为30%玻纤增强尼龙6为例，分析和研究了玻璃纤维长度及其分布对增强尼龙6主要性能的影响。
Using 30% glass fiber reinforced nylon 6 as a sample, the influences of the length and its distribution of the glass fiber on properties of the reinforced nylon were analyzed and studied.
为解决这一问题，作为钢筋替代产品的纤维增强聚合物(FRP)筋材的开发研究近几年在国内外已蓬勃兴起。
To solve this problem, fiber-reinforced polymer (FRP) tendons and reinforcing bars (rebars) have been developed to alternate to steel reinforcement in recent yeas.
亚克力表面为聚丙酸甲脂，背面采用树脂石膏加玻璃纤维，以增强其硬度。
The surface is Yakeli get together fat of third acerbity armour, the reverse side uses colophony gesso to add fibre glass, in order to enhance its hardness.
以连续玄武岩纤维为增强剂，乙烯基酯树脂为基体，制备了新型纤维增强树脂基复合材料。
A new kind of fiber reinforced composite was prepared by using continuous basalt fiber as reinforcing agent and vinyl ester resin as matrix.
制备了以MDF水泥为基体的尼龙纤维增强复合材料并对其力学性能进行了测试。
The preparation and the mechanical properties of nylon fiber reinforced MDF cement composites are reported.
生物材料为改善其作为植入体的力学性能需要生物活性纤维增强。
Improving mechanics performance of biomaterials as implants requires bioactive fiber for reinforcing composition.
以该方法为基础，可以详细给出纤维增强复合材料二维条件下的宏观等效力学性质。
The present scheme can be used to investigate the effective mechanical properties of the fiber-reinforced composites.
以几种不同类型钢纤维增强混凝土的抗压性能试验研究为基础，讨论了钢纤维掺量、分布形式以及钢纤维类型对混凝土抗压性能的影响。
Concrete reinforced with different kinds of steel fibers is studied experimentally. The effect of content, orientation, and type of steel fibers on concrete is discussed.
为考核纤维增强攻坚战斗部在混凝土中的爆炸毁伤效应，对裸装药、复合材料壳体、钢壳体装药在混凝土靶中的爆炸破坏效应进行了对比试验研究。
Experimental investigation on the blast effect of naked explosive, explosive charge covered with composite material shell as well as with steel shell in the concrete target is described.
为便于玻璃纤维增强塑料性能估算的实际应用，在相关国家测试标准的基础上，我们对玻璃纤维丝束的拉伸性能做了些对比试验研究。
For better estimation of GFRP properties, the authors made some experimental studies about tensile properties of glass fiber tow according to corresponding Chinese national test standards.
再以预处理后的新酚树脂为基体、乙炔炭黑为导电填料、玻璃纤维织物为增强材料制备了导电复合材料；
The modified xylok resin was subsequently blended with glass cloth and acetylene black to generate a new conductive composite.
该纤维的特征为抗静电性不受相对湿度的影响，不同于以往的依赖于吸湿性增强的抗静电机理。
The characteristic of thisantistatic fibre is that relative humidity has no influence on its antistatic property.
本发明的复合增强薄膜为三层结构，上、下两层为树脂薄膜，中间层为玻璃纤维网。
The compound enhanced film is in a three-layer structure, wherein an upper layer and a lower layer are resin films, and a middle layer is a glass fiber mesh.
采用碳纤维和钢纤维为增强材料、开环聚合酚醛树脂为基体，制得新型摩阻材料。
A new type of friction material has been prepared with carbon fiber and steel fiber as reinforcements and ring-opening polymerized phenolic as matrix resin.
本发明的复合增强薄膜为三层结构，上、下两层为PV C薄膜，中间层为玻璃纤维网。
The compound enhanced film is in a three-layer structure, wherein an upper layer and a lower layer are PVC films, and a middle layer is a glass fiber mesh.
玻璃纤维耐碱涂层网格布(玻璃纤维耐碱涂层增强网)是以玻璃纤维机织物为基础，经耐碱胶料涂层处理而成。
Fiberglass alkali-resistant coating Mesh (coated alkali-resistant glass fiber enhanced network) is the basis of glass fiber woven fabric by alkali-resistant rubber coating formed.
下层由以纤维为增强材料，以树脂为基料凝固而成。
The reinforcing material of the lower layer is fiber. The lower layer is solidified by the resin, which is used as base metal.
下层由以纤维为增强材料，以树脂为基料凝固而成。
The reinforcing material of the lower layer is fiber. The lower layer is solidified by the resin, which is used as base metal.
应用推荐