当您使用零调制解调器电缆在两台计算机之间建立直接串行连接时，您的电缆必须按下面清单1中显示的方式连接。
When you use a null modem to make a direct serial connection between two computers, your cable must be wired, as shown in Listing 1 below.
用户可以通过10英尺长的通用的串行总线2.0电缆把眼镜连接到PC机。
Users connect the glasses to a PC via a 10-foot-long universal serial bus 2.0 cable.
一条串行线(空调制解调器电缆)将通过机器的串口连接它们。
A serial line (null-modem cable) connects the machines through their serial ports.
Protocol还处理使用数据报或串行端口连接的消息发送与接收。
Protocol also handles the sending and receiving of messages using a datagram or serial port connection.
零调制解调器 (Null modem)是一种使用RS-232串行电缆连接两台计算机的通信方式。
Null modem is a communication method to connect two computers directly using a RS-232 serial cable.
BeagleBoard - xM提供一个DB 9凹口(female DB9 port)，需要一个串行电缆来将控制台连接到您的主机系统。
The BeagleBoard-xM provides a female DB9 port and requires a serial cable to connect the console to your host system.
在本例中，必须配置目标计算机以接受串行端口到串行端口的连接。
In this case, you must configure the target computer to accept a serial-port-to-serial-port connection.
在本例中，安装了Heartbeat应用程序，它在集群中节点间的串行连接上运行。
In this example, the Heartbeat application is installed and run over a serial link between the nodes in the cluster.
首先，用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -n - 1、无流控制)，使用默认用户IDadmin，无密码。
First, connect to each switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with a default user ID admin and no password.
它们很可能使用Bluetooth、RS- 232串行、USB，或者是Wi -Fi，因此它们可能只能够在本地连接(想象一下每个监视器都具备它自己的cell数据调试解调器和相关的计划成本！)
More than likely, they are Bluetooth, RS-232 serial, USB, or maybe Wi-Fi, so they must be locally connected (imagine every monitor having its own cell data modem and associated plan costs!)
这种方法是串行连接的一种替代方法。
这个缓存区域帮助减少串行化和多个连接点的开销。
This cache region helps to alleviate overhead with serialization and multiple connection points.
终端机也已经可以通过几根简单的串行线或者更复杂的多点系统，在短距离内与大型计算机或微型计算机连接。
Terminals could also be hooked up to mainframe and minicomputers over relatively short distances with simple serial lines or with more complex multidrop systems.
用于存储数据的硬盘必须通过私有互联结构（串行线缆）或者LAN连接到构成群集的服务器。
The disks used to store the data must be connected by a private interconnect (serial cable) or LAN to the servers that make up the cluster.
后面将讨论LTC中的连接串行重用。
用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -N - 1、无流控制)，默认下不需要用户ID和密码。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with default no user ID or password required.
一个串行端口，标识构建服务器上与基站连接的串行端口。
A serial port that identifies the serial port on the build server to which the base station is connected.
通过使用线程和连接，下载是串行，正如我上面所说的。
By using threads and join, downloading is serial, as I said above.
使用我的串行、并行或红外端口连接。
LTC中的连接串行重用。
从Arduino获得数据最简单的方式是让此单元直接连接到主机计算机的UniversalSerialBus (USB)接口，像串行连接那样读取数据。
The simplest way of getting the data from the Arduino is with the unit connected directly to a host computer Universal Serial Bus (USB) interface, reading the data as if it were a serial connection.
连接usb或rs232直接输出到您的电脑或笔记本电脑，或通过调制解调器拨号连接的串行端口。
Connect the USB or RS232 output directly to the serial port on your PC or Laptop, or by dial-up connection through modems.
将串行电缆连接到BeagleBoard - xM ' s DB 9端口和您的主机上，然后在设置模式下以根用户启动minicom。
Connect the serial cable to the BeagleBoard-xM's DB9 port and your host, and launch minicom in setup mode as root.
eSATA外部串行ata是串行ata接口的一个分支，用来连接硬盘到电脑，如果是最近几年的推出的新硬盘的话。
ESATA External Serial ATA is a branch off of the Serial ATA interface that connects your hard drive to your computer if it was put together in the last couple of years.
微处理器采用89c52，并且串行接口采用了RS- 485，可以进行在线下载和调试，以及与其它设备的连接。
The microprocessor adopts 89c52, and serial interface has adopted RS - 485, can download and debug online, and connect with other equipments.
连接器必须是可串行化的。
给出了单片机AT89C52与液晶显示器件的串行接口硬件连接图。
The hardware connection drawing of serial interface between MCU AT89C52 and LCD is illustrated.
以单片机为核心，研究多路低速数据串行传输的一种实现方法，给出硬件连接图，阐述各部分工作原理及软件设计思路。
Using single chip as the core, the paper studies a way to realize multiplex low speed data serial transmission, presents hardware connection chart, expounds work principle and software design idea.
现场总线是一种串行数据通信链路，是连接智能现场设备和自动化系统的一种通信网络。
Field-bus is a kind of serial link for data communication, or a kind of communication network for connecting intelligent field-bus equipments with automatic system.
现场总线是一种串行数据通信链路，是连接智能现场设备和自动化系统的一种通信网络。
Field-bus is a kind of serial link for data communication, or a kind of communication network for connecting intelligent field-bus equipments with automatic system.
应用推荐