串口连接希望对大家有帮啊啊！
一个利用串口连接手机模块发送短消息的源码。
A serial port connection using mobile phone short message sending module source.
一条串行线(空调制解调器电缆)将通过机器的串口连接它们。
A serial line (null-modem cable) connects the machines through their serial ports.
诊断基础系统就通过这个串口连接到VAS 5054a。
The Diagnostic Base System USES this com port to communicate with the VAS 5054a.
系统采用串口连接条码枪来扫描冰箱条码和抽空计条码进行配对操作。
The system adopts serial port to connect barcode gun with server to scan refrigerator bar and pump bar which is matched with refrigerator bar.
系统的输出是使用TL16C550实现异步通信串口并使之与计算机RS232串口连接以观察识别结果。
TL16C550 chip is used to extend an UART in order to communicate with PC RS232 serial port.
方案采用一个嵌入式的MODEM作为系统传输数据的MODEM, MODEM和单片机通过串口连接，实现数据的实时传输。
Adoption of MODEM as an embedded system for transmission of data MODEM, MODEM and MCU through serial connections, the real-time transmission of data.
一个常见的问题是，空调制解调器电缆可能会被连接到错误的串口。
One common problem is that the null-modem cable could be connected to the wrong serial port.
早期的网桥、协议转换器和路由器都是简单的专用硬件设备，通常是通过直接连接到该设备本身串口的终端来配置的。
Early network Bridges, protocol converters, and routers were simple dedicated hardware units typically configured through a terminal directly connected to a serial port on the unit itself.
这个接口的思想是用一种接口连接所有的东西（除了不能的），淘汰旧的，比如并口和串口。
The whole idea behind it is that this one interface will connect everything (except the stuff it doesn't), killing off the old guard, like parallel and serial ports.
将连接主机的串口设置为接受测试的设备。
Set the serial port connecting the host to the device under test.
我在一个论坛中发现了一篇参考文章（见参考资料），适于想要连接串口的用户阅读，因此这种功能也是可用的。
I found a reference on a forum (see Resources) to someone who supposedly wired up a serial port, so that might be possible as well.
用串口直连电缆连接到交换机串行控制端口(9600、8 - N - 1、无流控制)。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control).
首先，用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -n - 1、无流控制)，使用默认用户IDadmin，无密码。
First, connect to each switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with a default user ID admin and no password.
用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -N - 1、无流控制)，默认下不需要用户ID和密码。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with default no user ID or password required.
底部是物理设备，提供了对网络的连接能力(串口或诸如以太网之类的高速网络)。
At the bottom are the physical devices that provide connectivity to the networks (serial or high-speed networks such as Ethernet).
使用串口，并口或红外端口连接到其它计算机。
Connect to another computer using your serial, parallel, or infrared port.
除错器在宿主机上运行并且通过串口或网络连接到目标机上。
The debugger runs on a host computer and connects to the target through a serial port or network connection.
通过两个节点的串口，使用一根直连线缆将它们连接起来。
Use a null modem cable to connect the two nodes through their serial ports. Now test the serial connection, as follows.
用并口，串口或红外端口直接连接到其它计算机，或设置此计算机使其它计算机能与它连接。
Connect directly to another computer using your serial, parallel, or infrared port, or set up this computer so that other computers can connect to it.
该控制系统可以通过串口与计算机连接，实时显示各检测点数据。
This controller system can link to PC by serial interface and can real-timely display data of all testing point.
一台通用计算机，它通过串口或网络连接与目标机通讯。
A general - purpose computer that communicates with the target via a serial port or network connection.
该软件支持两台计算机通过调制解调器拨号连接，也支持两台计算机通过串口对接线直接对接。
This software supports creating connection between two computers both by modem dialing and directly with a serial-port to serial-port line.
本文将提供一种通过单片机串口直接连接触摸屏，从而实现响应用户的输入的方法。
This article will provide you a kind of touching screen connected with the single-chip computer via serial port, and it can respond user's orders.
要使用它，你需要将一个编程板连接到你的并口或串口上。
To use it you will need a programmer board attached to your parallel or serial port.
为了进行这一操作，你要把带排线的串口转换装置连接至板上。
For this procedure you connect the serial converter with the large ribbon cable.
目的利用串口技术和数据库技术，将酶标仪等检验仪器与LIS系统连接，实现计算机自动采集检验数据、管理检验数据。
Objective Making use of serial transmission technology and database technology, to connect the laboratory equipment with LIS, thus to realize automated data collection and data management.
本发明实现了将电脑的串口信号通过网线连接到液晶电视的CPU进行调试，方便快捷、简单。
Serial signals of a computer are connected to a CPU of the liquid crystal television through a network cable for debugging, which is convenient, quick and simple.
串口转换装置用排线连接到6针插头上。
The serial converter is connected to the 6 pin header with a ribbon cable.
串口转换装置用排线连接到6针插头上。
The serial converter is connected to the 6 pin header with a ribbon cable.
应用推荐