根据蓝牙串口应用框架，设计了系统应用程序并在系统硬件平台上实现。
The whole system software was designed based on the Bluetooth Serial Port Application Framework. Furthermore, it was implemented on the hardware platform of the wireless data transmission system.
针对双串口应用给出了利用环形队列的中断程序设计思路，提高了系统的实时性能。
Aimed at dual serial port application, the program design theme is proposed using circular queue which increases the real - time performance of the system.
在现实世界中，如果想使用传统的串口应用程序，并让它能使用蓝牙，就应当使用RFCOMM。
In the real world, RFCOMM should be used when you want to take a traditional serial port application and make it Bluetooth-enabled.
如果想发送和接收流数据（而且想采用传统的串口应用程序，并给它加上蓝牙支持），那么 RFCOMM更好。
RFCOMM is better when you want to send and receive stream data (and when you'd like to take a traditional serial port application and Bluetooth-enable it).
照这样，这个配置文件支持了旧的应用程序使用蓝牙就像是用串口链接，且不需要任何修改。
As such, the profile allows legacy applications to use Bluetooth as if it were a serial-port link, without requiring any modification.
和其他建立在串口配置文件之上的配置文件一样，被更低层蓝牙通信协议实现的虚拟串行链接对使用DUN配置文件的应用程序是透明的。
Like other profiles built on top of the serial port profile, the virtual serial link created by the lower layers of the Bluetooth protocol stack is transparent to applications using the DUN profile.
该软件在实际加油站中的成功应用说明了该设计方案的合理性，因此对其余串口通信应用领域具有很好的参考价值。
The successful application of the software in practical oil station shows the scheme is reasonable. So, there is good value to other serial communication fields.
大多数单片机只有一个串口，使其在许多场合的应用受到限制。
Most of single chip are limited in many applications, for it has only one serial interface.
并从实际应用出发，给出了AD 9852在串口中的应用，以及输出信号的处理结果。
For practical use, it presents the application of AD9852 technology in the serial port and the result of its output signal is managed.
单片机多串口通讯是一类较为特殊的应用。
Multi serial port communication is a kind of special application in single chip computer.
其中包括RS232串口信息的采集和配置文件的灵活应用。
It involved in information collection using RS232 serial port and how to use neatly configuration files.
RS232接口在计算机通讯中应用非常广泛，成为一种标准的串口通讯方式。
RS232 interface which is a standard serial interface mode has been widely used in computer communication.
结合CCD相机系统的接口设计，介绍了串口通讯的应用方案。
Combining the interface design of CCD Camera System, the application of serial communication is introduced.
串口和以太网口数据转换模块可以应用在串口设备需要远程传输文件的场合，如数控机床控制文件的远程传输等。
Data conversion module can be applied to the situation that need long range to deliver files in serial device, such as the numerical control machine tool transmit files with long range.
首先介绍了多线程技术的基本原理，然后讨论了多线程技术在串口通信中的应用，并给出了实现的方法和步骤。
This article illustrates the basic theory of multithread, then discusses its application on serial communication, and presents a general way and step of implementation.
说明：建立支持串口控件的对话框应用程序。MFC编程，可在VC环境下直接运行！
Create a dialog box application support for serial control. MFC programming, can be run directly in the VC environment!
应用系统使用了USB-UART桥接电路，实现了虚拟串口的USB传输。
Using CP2101 USB-UART electric circuit, the application system realized USB transfer of virtual serial port.
此外，本文还改善了基于RS- 485总线的串口通信协议，并实现了这种协议的应用程序。
Besides, the paper also improves a serial communication protocol based on RS-485 data bus, and realizes the application.
该串口驱动经过长时间的应用和测试，在整个系统中运行稳定。
This serial ports driver which has been applied and tested for a long time runs steadily in the whole system.
为了准确测试本处理器的运行情况，本文应用串口传递测试数据入FPGA开发板，测试模块读入测试数据，发送入PC机的主机端。
The testing data is sent to FPGA board through serial ports. This processor reads the data and sends to PC host.
应用程序动态加载技术涉及到操作系统、应用程序文件格式、串口(或其他方式)数据通讯等许多方面的内容。
Application dynamic loading technology deals with the embedded real-time OS, application file format, serial port (or others) data communication and etc.
阐述了CAN总线在232串口设备远程通信或自组网络中的应用，介绍了CAN到RS-232转换装置的软硬件设计方法。
The application of CAN in remote communication of RS-232 serial equipments is explained, the hardware and software of CAN to RS-232 converter are introduced.
该设计已成功应用于多串口卡产品开发中。
本文将提供一种通过单片机串口直接连接触摸屏，从而实现响应用户的输入的方法。
This article will provide you a kind of touching screen connected with the single-chip computer via serial port, and it can respond user's orders.
介绍一种基于串口通信，激光封装MEMS芯片的远程控制应用方案。
Based on serial port communication, a sort of long-distance control applications of MEMS packaging by laser was introduced.
多串口数据通讯作为计算机应用方向的一个重要分支，主要研究的是数据的多串口采集、存储和处理。
Multi-serial data communication is an important branch in computer application, which the main research is multi-serial collection, storage and processing of data.
最后，通过编写一个简单串口通信程序对多个串口进行实时监控，来介绍多线程编程技术在串口通信中的应用。
Finally, in order to introduce the applications of the multithread technology in serial communication, we give a simple program frame of real - time monitor to several serial ports.
结果表明，该技术的应用使得起重机安全监控装置不仅可以利用RS232串口与PC机通信，还可利用U盘进行数据的存储，具有一定的实用性和推广价值。
Practice shows that the way can not only make the monitor communicate with PC by means of RS232 serial interface but also store data by U disk. It has a certain practicality and promotion values.
第三章介绍了蓝牙串口替代模型和单芯片嵌入式CSR蓝牙开发平台，并给出基于串口替代模型的蓝牙点对点与点对多点数据传输模块的开发和应用。
Thirdly, the bluetooth SPP profile and CSR bluetooth One-Processor architecture system are discussed. The application and development of bluetooth data transfer module is also given.
第三章介绍了蓝牙串口替代模型和单芯片嵌入式CSR蓝牙开发平台，并给出基于串口替代模型的蓝牙点对点与点对多点数据传输模块的开发和应用。
Thirdly, the bluetooth SPP profile and CSR bluetooth One-Processor architecture system are discussed. The application and development of bluetooth data transfer module is also given.
应用推荐