仪器通过USB接口与上位机通信；
The instrument communicated with master computer through USB interface.
处理后的数据通过单片机与上位机通信以实现数据的离线分析。
The processed data can be communicated with a PC to realize off-line data analysis.
详细分析了硬件的组成、软件控制流程、系统的扩展和PLC与上位机通信的实现方法。
The hardware composition, software control flowchart, system expansion, and the communication between host computer and PLCs are analyzed in detail.
设计了步进电机驱动应用电路和单片机控制电路，并编写单片机程序，完成与上位机通信。
Designed stepper motor driver application circuit and Single Chip Microcomputer control circuit, and compiled the SCM procedures, finished to communicate with the upper computer.
本文以VB在西门子PLCS7-300与上位机通信中的应用为例，提出了VB在串行通信中一种新的应用方法。
This paper takes the communication between SIMATIC S7-300 and the computer as an example, puts forward the new idea of the usage of Visual Basic in serial communication.
控制器通过PCI总线与上位机通信，采用DSP和CPLD完成了运动控制功能，实现了机械手关节运动的伺服控制。
The communication with the upper computer was realized through PCI bus, DSP and CPLD was used to achieve motion control of manipulator's joints.
本控制器可通过串口直接与上位机通信，亦可借助于CAN- USB转换器件，通过CAN接口实现与上位机通信。
This controller can communicate directly with the PC computer through the serial port, or through the can interface helped with the CAN-USB conversion devices.
介绍了伦茨变频器通过LECOM协议与上位机通信的方法。给出了LECOM通信的硬件构成、通信协议以及程序设计方法。
A method of LECOM communication of LENZE inverter to the host is described, and the hardware composition, communication protocol and programming design method are also presented.
按照微型化、模块化的设计原则，适配器分为命令的传输解析模块、逻辑控制模块和存储模块；与上位机通信采用以太网接口。
According to the design principles of miniaturization and modularization, adaptor includes command transmission and analysis module, logical control module and memory module.
然后，介绍了上位机软件设计以及上位机与温度记录仪之间的通信协议设计。
And then, the design of software in PC and communication protocol between PC and temperature logger are introduced.
CAN总线提供监测装置与上位机之间的通信接口。
CAN provide communication interface for monitoring installment and upper monitor.
文中阐明了传感器及仪表的选用方法，上位机与各分布控制系统的通信联系。
In the text stated how to choose transducer and meter, communication between PC and distribution control system.
设计实现了对电子标签的识别、多组电子标签序列号的循环存储、与上位机的通信等功能。
The design has implemented the functions of RFID identification, multiple RFID serial number of cycle storage, Reader and PC communications, and other functions.
详述了上位机软件的功能、模块及数据的组织，分析了主程序流程和与下位机通信的流程。
The software function, modules and data organization of the Upper Layer Computer are explained, the process of main program and that of the communication with Upper Layer Computer are narrated.
研究了基于电话网实现了上位机与FX2N系列PLC远距离通信的方法。
The realization method of telephone network based remote communication between host computer and FX2N series PLC is studied.
介绍上位机与欧姆龙V600系列RFID控制器串行通信连接方式、通信命令和通信数据帧格式。
The communication link way, communication commands and communication data structure between host computer and OMRON V600 Series RFID controller are introduced.
介绍了一个实现上位机与PLC通信的动态链接库的设计过程，并举例说明了其使用方法。
This paper introduces a dynamic linked library's design, which is used in communication between computer and PLC, and discusses its usage with a simple example.
通过上位机pc与PLC以自由口方式串口通信实现PC对PLC的实时监控，并用PLC对温度、压力进行控制。
Realtime control between PC and PLC is realized through serial communication by freeport mode, and the control of temperature and pressure is realized by PLC.
基于蓝牙的无线通信系统是模块化机器人闭环控制系统的一个重要组成部分，上位机与机器人之间的通信通过蓝牙模块来实现。
The wireless communication system is an important part in the closed loop control system of modular robots, the correspondence between computer and robot is realized by the bluetooth module.
通讯模块通过串口通讯与数控设备通讯，负责上位机与数控器之间的通信。
And in the communication module, the system answers for communication between PC and CNC through the port communication and CNC equipment.
上位机采用笔记本电脑，放置于岸边，用一对射频收发器与船舶缩尺模型进行无线通信。
The upper computer communicating with the scale model ship through a pair of RF transmitters, is placed on the shore.
该系统通过PIC单片机对多路漏水传感器信号进行实时检测与处理，并将结果通过通信实时传送给上位计算机进行决策控制。
Using PIC single chip computer, the system can make real-time detection to multiplexer channel leak sensor signals and deal with them, then send the result to computer to make decision.
在上位机的程序设计中，采用VB编写电机控制的操作界面，并应用RS485通信实现与下位机的数据交互。
VB programming is used to prepare the operation of motor control interface on the host computer, and apply RS485 communication programming to achieve data exchange.
同时，根据数据传输量的不同要求，分别设计并实现了基关节单元与上位机之间、基关节单元与指节单元之间的数据通信系统。
At the same time, it introduces the data communication system between base joint cell and PC control system or between base joint cell and knuckle cell respectively.
该系统包括恒电位电路、微电流检测电路、控制器及其外围电路以及与上位机的通信。
The system includes constant potential circuits, micro-current detection circuit, controller and its peripheral circuits as well as the communications with the PC.
本文以MSC1210微处理器为核心，对8路模拟称重传感器信号的采集，通过RS232接口与上位机进行通信，构成一个智能汽车称重系统。
This article designs an intelligent cars weighting system with MSC1210 MCU, 8 channels analog weighting sensor single collection, RS232 serial port to communicate with MWD.
以单片机为核心的各传感器接口模块并行处理各传感器信号，并通过双口存储器与上位处理器通信。
Modules with microcontrollers in the system process their signals parallelly, and communicate with host processor by dual port memory.
本文采用蓝牙技术，设计了上位机与蓝牙传感结点的通信电路模块并编写出应用程序，以实现蓝牙传感网络的短距离无线通信。
Therefore, this paper, using Bluetooth technology, designs communication circuit module both of PC and Bluetooth sensor nodes, and writes applied programs. It has achieved short distance wireless.
给出了以89s52为主控芯片的下位机系统的软硬件设计，并给出了上位机操作软件和与下位机的通信协议。
The software and hardware design of the substrate control system which USES 89s52 as the main control chip, the PC's operating software and the communication protocols are given in this paper.
本文介绍了立体车库的PLC控制系统总体设计、控制程序设计、PLC与上位机接口的通信方案设计、计算机从PLC读取数据的程序设计等。
The main description is on designs such as overall scheme, control program, communication interface between PLC and upper computer, data read program.
应用推荐