此不锈钢管道工程已完成，以高标准测试检验过了。
The stainless steel pipework has been constructed, tested, and inspected to very high standards.
它是直径约2厘米的不锈钢管。
不锈钢管件的加工方法也有很多种。
There are many kinds of processing methods of stainless steel pipe fittings.
本文总结了砂带磨抛不锈钢管的研究工作。
This paper summarizes the research work done to grind and polish rustless steel pipe.
我们将为奥氏体不锈钢管的水压试验引进净水。
We shall conduct the clean water for the hydrostatic test of the austenitic stainless steel pipe.
使用不锈钢管或使用铜管，管内流速都是紊流。
Using ga stainless steel tube or a copper tube, the flow rate in the tube is turbulent.
在上水箱和出水口之间使用不锈钢管来抑制细菌生长。
Stainless steel piping between top tank and dispensing spout to control bacteria growth.
不锈钢管比铜管不易纠结，但不经酸性处理焊接较困难。
The stainless tubing is less likely to kink than copper, but it is harder to solder without an acid treatment.
不锈钢管比铜管不易纠结，但不经酸性处理焊接较困难。
The stainless tubing is less likely to kink than copper but it is harder to solder without an acid treatment.
热挤压是优质高性能奥氏体不锈钢管材的先进生产工艺。
Hot extrusion is the advanced production process for high-performance austenitic stainless steel pipes.
这就使不锈钢管的对流放热系数比铜管的对流放热系数大。
This makes the convective heat transfer coefficient of the stainless steel tube is larger than that of the convection heat transfer coefficient of the copper tube.
它能去掉不锈钢管表面的锈、氧化皮、旧的漆层及其他污物。
It can remove the rust on the surface of the stainless steel tube, oxide skin, old layers of paint and other dirt.
气缸的踝足矫形器功能还包括一个不锈钢管，辊磨光活塞杆。
The AFO cylinder features include a stainless steel tube and roller burnished piston rod.
我们的高耐压管由碳素钢和不锈钢管组件制成，按照客户的要求来组装。
Carbon steel and stainless steel tube assemblies bent and formed to suit customers requirements.
不锈钢壳，不锈钢压圈，玻璃面，不锈钢机芯，不锈钢管子，不锈钢接头。
Stainless steel case and ring, glass lens, stainless steel internal, connection and joint, ammonia pressure gauge.
济南不锈钢管的衔接方法常用的有对焊衔接、承插焊衔接以及管螺纹衔接。
Ji 'nan stainless steel pipe connection methods are commonly used welding connection, socket welding connection and pipe thread connection.
结果表明，不锈钢管”鼓包”状开裂的主要原因是晶间腐蚀导致的蠕变断裂。
The results shows that the main reason of stainless steel pipe cracking is that intercrystalline corrosion result in creep rupture.
大衣与不带催化转化器或陶瓷让它锈出来更换整个党的不锈钢管段胜排气系统。
Coat the exhaust system with ceramic without the catalytic converter OR let it rust out and replace the whole dang thang with stainless steel pipe sections.
实验研究了钛管的污垢特性，并和不锈钢管、紫铜光管的污垢特性进行了比较。
An experimental study of titanium tube fouling characteristics was conducted, which were compared with those of stainless steel tubes and copper bare tubes.
通过介绍美国某公寓燃气改造工程，推荐一种新型的燃气工程管材波纹不锈钢管。
The corrugated stainless steel tubing, a new type of gas engineering pipe material, is recommended through the introduction of an American apartment's gas project reform.
东莞市兴业金属材料有限公司是广东省东莞市首家专业生产氩弧焊不锈钢管的企业。
Of Dongguan City in Guangdong Province, the first professional production of stainless steel pipe welding businesses.
不锈钢管表面经过喷砂变得粗糙又很均匀，能增强油漆层对不锈钢管表面的附着力。
Stainless steel tube surface after sand blasting become rough and very evenly, can enhance the paint adhesion layer on the surface of stainless steel pipe.
所有的加热原件均用高温镁填充，发热管为高质量的不锈钢管，铜管，以及铁管等。
All its electrical heating elements, with high-temperature magnesium WATT as filler, which are made of good quality stainless steel Tubes, cooper Tubes, and iron Tubes, ect.
该工艺的实施需要合理、完善的工艺装备作为基础，尤其对于不锈钢管与管板的连接。
It shall be based on a set of reasonable and perfect process equipment, especially for stainless steel tube to tube-sheet.
该传感器是非常坚固的，是由不锈钢制成的惰性氟聚合物探针护套和不锈钢管的目标。
The sensor is very rugged, being made of stainless steel with an inert fluoropolymer-sheathed probe and stainless steel target tube.
所以，商场上许多小加工户用残次不锈钢管材假充质量好的不锈钢，这即对错国标圈套。
So, with substandard quality stainless steel to stainless steel pipe market many small processing households, this is the wrong standard.
介绍了研制成功的光纤不锈钢管生产线，分析了工作原理以及具有自己特色的结构组成。
This paper presents the newly-developed production line for stainless steel fiber tube by analysing the work principle and characteristic construction.
介绍采用药芯焊丝手工钨极氩弧焊焊接奥氏体不锈钢管道所进行的焊接试验及工艺评定。
The welding experiment and procedure qualification for manual TIG welding of stainless steel tubes with flux cored electrode is presented in this paper.
凝汽器304不锈钢管发生点蚀的主要原因是不锈钢管质量不合格和使用的酸洗液不当。
The major causes of pitting in the 304 stainless steel tubes for condenser are that the quality of the stainless steel tube is unsatisfactory and the acid solution is unsuitable.
凝汽器304不锈钢管发生点蚀的主要原因是不锈钢管质量不合格和使用的酸洗液不当。
The major causes of pitting in the 304 stainless steel tubes for condenser are that the quality of the stainless steel tube is unsatisfactory and the acid solution is unsuitable.
应用推荐