监控系统采用组态软件编写，组态软件可以方便的与上位管理机和下位执行机构进行通信。
The supervisory control system is programmed by the configuration software. The configuration software can communicate with the management computer and the actuating equipments easily.
介绍烧结机的配料系统采用PLC加上位管理机来改造原有手工操作，收到了较好的效果。
The burden system of sintering machine and the retrofit of using PLC and host computer to replace the manual operation are described. The retrofit obtained good result.
用高级语言编写了上位管理机的程序，完成的功能主要有数据评判、检测报告单打印和查询统计等。
The programs has been developed for the PC computer used for data managements, the functions of the programs are data evaluation, printing test reporters and information inquires and so on.
自动配料部分以可靠的工业控制机作为上位管理机，界面显示，操作控制，报警功能设置完备齐全；
Automatic Burden of reliable industrial control aircraft as upper-management, interface, operational control, alarm functions provided in full;
介绍一种通过CAN总线及以太网对粮仓内温湿度远程实时监控的系统，详细介绍了上位管理机和下位监控机的功能与实现。
It presented the remote monitor system for large granary based on the CAN field bus. It gave the design and function for the senior management computer and applied control computer in detail.
第三部分是仪器运动的步骤管理，在上位机的利用仪器的状态来计算下一步仪器的运动命令。
The third is the step management of the instrument movement, which computes the next step according to the instrument state.
最后通过实验证实了上位机软件具有RS232串行通信、数据库管理和故障波形绘制的功能。
The software's functions of RS232 serial communication between data acquisition equipment and computer, management of data-base and drawing of fault wave are validated by experiments.
该血压计利用远程通讯，由上位机586进行系统管理，并采用软件的信号平均技术来达到较高的测量精度，在医疗临床上有广泛的适用性。
The meter is controlled by PC586 via remote communication with higher measuring accuracy using signal averaging technology of the software. The meter has a wide adaptability in clinical practices.
上位机系统实现对下位机的管理及对综合信息进行加工、处理。
The upper order computer system manages lower order computers and processes synthetic information.
对系统的硬件结构、MCU控制软件以及上位机管理软件的设计方法进行了介绍，并对其中的关键实现技术进行了分析。
It gives a detailed introduction about the design of system hardware, MCU software and management software running on PC, especially gives an analysis of the key technique for this system.
双向串行通讯功能，上位机可直接管理配方及监控仪表工作状态。
Two-way serial communication function. The computer can manage the prescription and the working state of appearance directly.
火灾报警系统由多个监测站和一个上位机管理站组成。
Fire alarm system is made up of monitoring stations and PC management station.
该总线桥是某型协调控制器系统的通讯核心，实现了系统下层的背板总线、背板总线管理器与上位机epp并口之间的协议转换以及通讯仲裁功能。
This bridge is the core of communication of the controller system, it connects the bottom level backplane bus, backplane bus controller, and PC EPP parallel port.
它通过单片机对温室综合环境因子采集及上位486微机监控和管理，实现对温室综合环境控制功能。
It realises controlling function through the synthetic environment factors gathered and detected by single chip microcomputer and supervised by epistasy 486 microcomputer.
介绍了上位机软件的数据分析与处理、数据库管理、报表统计等功能。
Introduced the data analysis and treatment for up stream machine soft wear, data base management and repot forms, Stat functions.
同时，设计开发了检测控制系统和上位机管理系统的软件程序。
Meanwhile, software of the detection and control system, along with that of the management system of the uppwe machine, is designed.
构建SQL数据库对上位机控制系统中存取车辆的相关信息实行动态管理调用。
Finally, this paper constructs the SQL database, and deposits and withdraws vehicles' related information to the upper computer control system to implement the dynamic management transfer.
上位机使用OPC技术与工厂信息管理系统进行数据交换，实现汽车生产线信息管理的自动化。
The OPC is used for exchanging data between the upper computer with sever, and the automatization of the information systems is realized.
系统的硬件由上位机和PC控制器构成，软件由二次开发的上位机组态运行操作管理软件和PC运行软件组成。
The hardware is composed by upper-computer and PC, the software are consist of configuration manger software and PC run software.
新系统借助于计算机通信和网络技术形成了上位机综合管理和下位机实时控制的体系结构。
By dint of the technique of computer communication and net, the new monitor system can carry out the management in the up-computer, and real-time control function in the down-PLC.
最后介绍了上位机管理系统的软件功能模块。
In the end, we introduce software module of the computer administrative system in this paper.
在软件开发中，设计了上位机监控程序，对多个治疗对象进行不同方案的治疗、监控和管理，并纪录其治疗历史。
In the software development, the thesis designed a PC monitoring program which could treat many patients with different electrical stimulation, monitor the process and record the treatment history.
上位机的管理软件通过对串口的读取，将用户端的实时信息进行录入，并针对相应情况做出处理。
By reading the communication port, the management software in the upper computer records the data real-timely and handles the corresponding situation.
该系统为两级控制，PC机作为上位机进行信息管理和控制规划，PLC作为控制机实现控制任务。
The system is devided into two layers, a PC is used in up layer for supervising of message and control, a PLC is used in bottom layer for controlling task.
完成硬件设计之后，本文给出了实验系统的软件设计，包括交换机控制程序、改进的时隙产生程序和界面友好的上位机管理程序。
Complished the hardware design, this paper presents the software design including control program, modified time slot generating program and friendly upper-computer manager program.
该系统采用主从式上下两级微机网络结构，上位机完成系统的管理，控制下位机执行具体的操作。
Two levels master-slave microcomputer network is applied to this system. The master computer manages the system and controls the slave microcomputer to excuse the operations in details.
这样，就把单个工作的工位主机联系在一个整体中，由一台上位机统一管理各工位主机的生产调度等工作。
Such, all single job labor places are contacted in an overall right away and their production, management and other movements are leaded by one lead plane of computer.
这样，就把单个工作的工位主机联系在一个整体中，由一台上位机统一管理各工位主机的生产调度等工作。
Such, all single job labor places are contacted in an overall right away and their production, management and other movements are leaded by one lead plane of computer.
应用推荐