根据五杆机构试验台的特性,建立了相应的上位机控制系统。
Establish the interface of control system based the characteristic of he controlled five-bar mechanism.
构建SQL数据库对上位机控制系统中存取车辆的相关信息实行动态管理调用。
Finally, this paper constructs the SQL database, and deposits and withdraws vehicles' related information to the upper computer control system to implement the dynamic management transfer.
论文分析了电力电缆沟道监测系统中嵌入式上位机控制系统的功能需求,设计出上位机的架构。
After a detailed analysis about the functional requirements of embedded host-computer, this paper first design the architecture.
除渣机械手控制系统能够和上位机控制系统进行通信,从而保证整个自动浇注生产线在预定的生产流程控制下进行生产。
Slag manipulator control system can communicate with PC control system and can ensure the automatic casting production line work under the control of the production process.
文中阐明了传感器及仪表的选用方法,上位机与各分布控制系统的通信联系。
In the text stated how to choose transducer and meter, communication between PC and distribution control system.
该应用系统是由上位机系统和下位机系统组成的集散控制系统。
The application system consists of upper order computer system and lower order computer system, it is both a concentrating and a dispersing control system.
上位机可以是集散控制系统或大型PLC。
Up machine can be distributed control system DCS or large PLC.
目的:为病床控制系统测试平台设计一种能够进行数据采集与运动控制的上位机软件。
Objective: To design a upper computer software which can achieve data acquisition, display, motion control for sickbed-control test system.
基于蓝牙的无线通信系统是模块化机器人闭环控制系统的一个重要组成部分,上位机与机器人之间的通信通过蓝牙模块来实现。
The wireless communication system is an important part in the closed loop control system of modular robots, the correspondence between computer and robot is realized by the bluetooth module.
本文设计的远程控制系统共有三大部分:1。上位机软件。
The remote control system is composed of three parts:1. PC software.
针对碳纤维生产的工艺要求,总体设计了分布式碳纤维生产线温度控制系统,编写了上位机监控系统软件。
A dual level computer temperature control system for carbon fiber production line was designed, based on its technological requirements and the monitoring software was programmed.
介绍了采用双plc及其PC—L INK网络设计的电梯模型控制系统,通过上位机软件对整个系统的运行进行实时监控。
The paper introduces an elevator model control system which is implemented with double PLC and PC-LINK network, the overall system movement is monitored through the upper computer software.
本论文针对沙漠环境模拟实验室(简称“环模室”)设计了由上位机(PC)和下位机(PLC)构成的控制系统方案。
Firstly, the dissertation presents the design of automatic control system which consists of PC and PLC for the laboratory of desert environment simulation;
控制系统硬件部分由DS P控制板和电机驱动板组成,DS P控制板与上位机之间的串口通讯有无线和有线两种方式可以选择。
Its hardware is composed of DSP controlling board and motor driving board. There are two choices for the serial communication between the DSP board and the PC.
对于使用串行通信和USB上位机的仪器控制系统设计有一定的参考价值。
The experimental result shows that it has some useful reference value for the design of serial communication and USB master-slave system.
介绍以omron C2 0 0 H可编程控制器为主控机,配有上位计算机的啤酒糖化工艺计算机控制系统。
A computer control system for beer saccharification process is introduced which is equiped with a superior computer and takes an OMRON C200H as its programmable controller.
其中下位机主要是以嵌入式控制系统采集数据,以通信的方式传递到上位机。
The one-chip computer use the inset control system to gather data and transmit it to the PC.
本文介绍了立体车库的PLC控制系统总体设计、控制程序设计、PLC与上位机接口的通信方案设计、计算机从PLC读取数据的程序设计等。
The main description is on designs such as overall scheme, control program, communication interface between PLC and upper computer, data read program.
控制系统采用上位机、下位机的结构,温度控制算法采用改进的PID控制算法。
The control system adopted master machine and slave machine architecture, and the temperature controlling used improved PID control algorithm.
由PLC和上位计算机组成的湿磨机控制系统,实现了系统的自动控制,提高了产品的合格率,降低了操作人员的劳动强度。
The control system composed of PLC and host computer implemented the automatic control of system. It enhanced the product's qualification and reduced the labor of operators.
控制系统的软件设计包括两个部分,下位机和上位机的软件设计。
The software design of the system consists of two parts, DSP software design and host computer software design.
同时,设计开发了检测控制系统和上位机管理系统的软件程序。
Meanwhile, software of the detection and control system, along with that of the management system of the uppwe machine, is designed.
控制系统由上位机、中继单元和模块单元构成。
对下位机子站控制系统和运行于上位机的系统控制软件进行了多方面的测试,并分析测试结果,提出了改进的方向。
The author did a number of tests of the control system and the software run by the principal machine in many ways, analyzed the results of the tests, and gave the direction for improvement.
PLC与计算机集成的水处理自动控制系统由上位机、连接转换器及PLC组成。
The water treatment automatic control system integrated by PLC and computer consists of up-posting machine, adapter and PLC.
该控制系统包括上位机控制界面、单片机控制电路、驱动器以及步进电机。
The system includes the upper computer software, the MCU circuit, the driver and the step motor.
以上位机控制的矿井提升自动控制系统为例,介绍了该自动控制系统中上位机与PLC之间以及各plc之间的通讯实现。
Explains the communication scheme of the master computer and the PLC as well as the communication scheme of PLC1 and PLC2 based on a mine hoist autocontrol system.
以上位机控制的矿井提升自动控制系统为例,介绍了该自动控制系统中上位机与PLC之间以及各plc之间的通讯实现。
Explains the communication scheme of the master computer and the PLC as well as the communication scheme of PLC1 and PLC2 based on a mine hoist autocontrol system.
应用推荐