并对ECAE工艺过程进行了三维弹塑性有限元模拟。
And ECAE process was simulated by 3-dimensional-elastic plastic method of finite element.
采用三维弹塑性有限元法对四辊轧机轧制薄带钢的过程进行了模拟。
The thin strip rolling process of 4-high strip mill is simulated and analyzed by using 3-D elastic-plastic FEM with software MSC.
用三维弹塑性有限元分析方法，全面分析了点焊搭接接头的应力分布情况。
Using method of three dimensional FEM analysis, whole stress distribution in the joints is are obtained.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
本文在锻造新工艺理论与技术的指导下，应用三维弹塑性有限元研究了拔长和倒棱工序。
Guided by the new forging theories and technologies, 3d elastoplastic FEM is applied to research of stretching and chamfering.
基于比奥固结理论，结合某沿海围垦工程，建立了三维弹塑性有限元模型，模拟了土体固结过程。
Based on Biot consolidation theory, combined with a certain project, a three-dimensional elastic -plastic FEM model is established, the process of soil consolidation is simulated.
同时对某水电站引水隧道系统进行了三维粘弹塑性有限元数值模拟和三维弹塑性有限元数值模拟。
In this paper, a 3-d visco-elastoplastic FEM and a 3-d elastoplastic FEM are used to analyze the stability of the excavation structure of one hydropower station diversion tunnel system.
针对旧污水沉降罐在安装刮泥机后的受力可靠性问题，建立了简化力学模型和三维弹塑性有限元模型。
The simplified mechanical model and three-dimensional elastic-plastic finite element models was found to analyze the reliability of sewage settling tanks equipped with scraping sludge machine.
建立了汽车轮毂端盖拉伸成形三维弹塑性有限元模型，并利用MARC软件对其拉伸变形过程进行了数值模拟。
The 3D elastic-plastic finite element model for the stretch forming of automobile wheel hub end housing was established, and the deep drawing process was numerically simulated by MARC software.
采用三维弹塑性有限元方法，研究了酚醛树脂和丙烯酸树脂两种胶粘剂的胶焊接头中，板宽对应力分布的影响。
The method is used in this paper to study the influence of plate width on plate shape, and some varying rules of crown with plate width are discovered.
利用三维弹塑性有限元软件L S- DY NA对一种典型偏心轴类零件楔横轧成形进行了数值模拟，分析了其成形过程、应力应变场分布及工艺特点。
The cross wedge rolling deformation process of shaft parts with eccentric section was simulated with three-dimension finite element soft LS-DYNA by using elastic-plastic finite element method.
使用大型三维非线性有限元程序（TFINE），对拉西瓦拱坝-地基系统进行了三维弹塑性有限元数值模拟，对该拱坝-地基系统在正常荷载下的位移和应力进行了分析。
This paper presents the elastoplastic numerical results of Laxiwa arch dam-foundation system by employing 3D non-linear FEM code, TFINE. Displacements and stresses of the dam were analyzed.
利用三维有限元计算弹塑性地基中不同基础在水平力与竖向力作用下交错桁架体系的变形与内力。
The three dimensions FEM is used to investigate the displacement and forces of staggered truss with different foundation in elastoplastic ground under horizontal and vertical loads.
建立了三维热力耦合问题弹塑性有限变形有限元方法，并对板材热轧过程进行了计算机模拟。
A three dimensional elastoplastic finite element model is presented for thermomechanical coupled finite deformation problems, and using the model, a slab hot rolling is computer simulated.
针对板材三维冲压成形的切边回弹问题，提出了基于大变形弹塑性有限元数值模拟理论的切边处理AIA方法。
In this paper, an edge-cutting AIA method is presented based on elastic-plastic large deformation finite element simulation theory.
本文采用三维弹塑性增量变塑性刚度有限元法计算地下洞室围岩稳定。
In this paper, the elastoplastic incremental finite element method with variable plastic stiffness is used to analyse the surrounding rock stability of underground openings.
利用大型非线性有限元MARC ，对某自动迫击炮浮动炮闩闭气结构，进行了三维装配体有限元建模和动态弹塑性分析，获得了关键闭气构件的应力、塑性应变和变形的动态响应。
D assembly FE modeling and dynamic elastoplastic analysis are carried out for the obturator structure of a floating gun breech mechanism by using nonlinear finite element code MSC MARC.
探讨了用有限元法计算三维弹塑性J积分的方法，并就一些计算的关键问题和技巧作了分析。
The calculation method of 3D elastic - plastic J - integral by using finite element method was explored, meanwhile, some key questions and techniques were introduced.
文章应用非线性弹塑性模型，对层状土地层中浅埋隧道全断面开挖过程进行了三维有限元分析。
A nonlinear elastoplastic model is applied to simulate the full face 3-d excavation process of a shallow tunnel embedded in layered soil.
采用适用于上海饱和软土的非线性粘弹塑性模型，研制了三维有限元软件。
The elasto viscoplastic constitution has been employed for 3D FEM programming of soft saturated clay in Shanghai.
通过建立三维有限元弹塑性力学模型，模拟计算了水平矿柱上各盘区的屈服破坏过程。
A three-dimensional finite element model was constituted to simulate the yield process of the macro-horizontal jamb in the tectonic stress field caused by continuous mining.
利用MARC程序作为平台，建立了滩海桶形基础平台整体有限元动力分析模型，并对我国第一座桶形基础平台进行了三维弹塑性地震时程动力分析，得到了一些很有用的结论。
By using MARC program, the dynamic finite element analytic model of the first platform with bucket foundation in China is established and its elastoplastic seismic time-history response is calculated.
采用三维热弹塑性有限元法对管板接头的焊接变形进行数值模拟。
Welding deformations of a pipe-plate joint with holes after multi-pass welding are simulated using the thermal-elastic-plastic finite element method.
介绍了在厚覆盖岩层条件下，确定地下采矿引起地表变形特征的三维有限元弹塑性计算分析工作。
The analysis of 3D elasto-plastic FEM is introduced for calculating the deformation of the ground surface caused by underground mining under thick rock overburden.
介绍了在厚覆盖岩层条件下，确定地下采矿引起地表变形特征的三维有限元弹塑性计算分析工作。
The analysis of 3D elasto-plastic FEM is introduced for calculating the deformation of the ground surface caused by underground mining under thick rock overburden.
应用推荐