黑色的螺旋楼梯围绕着暴露出来的梁直接连接到屋顶结构，联系起了所有的三层区域。
A black spiral staircase clips onto exposed timber beams in the roof structure to connect all three floors.
最后，通过一个三层框架和一个悬臂梁的算例证明：组合参数法能够非常精确地识别出结构的损伤位置和损伤程度。
Lastly, through a three-layer frame and a cantilever beam testify that the method can very accurately identify structural damage location and degree.
三宅说，“这些细薄的深梁合乎理性的思维，并因此将结构划分为个人视线之上的空间和个人视线之下的空间。”
Thin wide beams were consequently passed through, thuspartitioning the structure into a space above people's line of sight and a space below.
整个结构划分为若干组合单元，每个组合单元包括拱、桁梁及竖杆横撑架三部分。
The structure is resolved into several compound elements and every compound element consist of three parts: arch, trussed beam and lateral brace.
宅院格局均为三合院、四合院式和一字屋，外观立面和梁架结构等都基本保存原有的传统风貌。
The house is courtyard courtyard pattern, and a house, and all the exterior facades beam structure basically preserved the original traditional style.
铜绿山矿某三铰拱屋架单轨吊梁结构体系，因技术改造增加设备简体重量，随意用滑轮组起吊检修，导致拱架上弦全截面贯通式开裂的结构事故。
Then the structural accident of total section drive-through type crack is caused in arch frame top chord, which is induced by hoisting and detection using pulley arbitrarily.
本文在对三梁四柱式多点成形压力机机架结构研究的基础上，建立了压力机机架有限元模型和机架结构优化的数学模型。
On the basis of the research on the frame structure of the multi-point Forming machine, its finite element model and mathematical model have been set up.
这种结构形式使主梁安装具有三次合拢的特点，是国内首次采用．详细地介绍其合拢技术，同时也对其他安装问题进行了说明和讨论。
This type of structure makes the main beam have three closures, which is first used in China, Whose closure technique is described in detail and other erection problems are also discussed.
该模型的拓扑结构可以是任意型式，允许包含四边形单元、三角形单元和梁（杆）单元。
The model may be various non-simple topological structures and contain any combinations of beams, triangular elements and quadrilateral elements.
三主梁模型适用于结构动力特性分析，但不能直接用作动力分析模型。
It can also be applied to calculating the dynamic characteristics, but not suitable for the dynamic model.
结构元素包括杆元、平面梁元、空间梁元、平面三角板元、平面矩形板元和弯曲矩形板元等。
Structural elements contain bar, plane beam, space beam, triangular and rectangular plates with membrane stresses, rectangular plate element with bending deformations.
另外，对本桥的索梁锚固区域的结构和配索合理性进行了验证，结果表明了该桥索梁锚固区三向预应力布置的合理性，以及锚固区结构设计的合理性。
Rationality of construction and prestressed tendon layout around cable-girder anchorage zone is also tested in this paper. The result indicates that the design of anchorage zone is appropriate.
本文首先利用状态空间法结合三角级数展开技术，对简支的FGM梁、板、圆柱壳结构进行了弹性理论分析。
So, we employ an elasticity method, i. e. state space method, to analyze the simply-supported FGM beams, plates and cylindrical shells.
老顶存在三种基本结构：类拱式、拱梁式和梁式。
The main roof has three basic structure forms: dynamic arch, arch-beam and beam.
基于所给出的结果，可望该有限元模型可以作为分析三维空间曲梁结构的有效工具。
Based on the results reported herein, one may conclude that the proposed curved element may be used for the analysis of three-dimensional curved beam structures.
三门江大桥主梁采用分离式单箱双室结构。
The beam of Sanmenjiang bridge is the discrete simple-box double-cell girder.
将此类结构离散为三角形平板元素和梁元素的集合体。
The discrete elements used are triangular plate elements and beam elements.
主要结构包括构成三角形的网络体系胶合梁，暴露在教堂空间之中。
The main structure consists of Glulam beams in a network of triangles, as exposed in the Church room.
广东东莞东江大桥主桥是一座三主桁双层桥面刚性悬索加劲钢桁梁，这是一种较为新颖的桥梁结构形式，它同时具备悬索桥与钢桁架桥的优点。
The main bridge of Dongguan Dongjiang bridge is a three main trusses steel bridge with rigid cable, is a new double-deck bridge structural style.
在建的武汉二七长江大桥是主梁采用钢结构，桥面板为混凝土结构，主梁与桥面板用剪力件连接的世界上最大跨度的三塔结合梁斜拉桥。
Erqi Yangtze River bridge is composite girder cable-stayed bridge with three towers with the longest span in the world, which is connected with steel girder and concrete slab.
结合广东磨刀门大桥的工程实例，介绍了优化的三角挂篮的设计构思、总体结构，以及在连续箱梁施工中的施工方法与结构分析计算。
This paper introduced system architecture of the three-stage-computer-con-trolsystem at the port of Wanzhai in Xuzhou, software structure and its design flow.
通过对ANSYS在钢筋混凝土T形梁优化设计中的应用研究，给出了建立钢筋混凝土结构T形梁参数化三维实体模型的方法。
Based on the application study of ANSYS in the optimization design of RC structure t beam, the building method of 3d parametric entity model to RC structure t beam is given.
斜拉桥上部结构包括三个主要部分：索塔、主梁和斜拉索。
The superstructures of cable-stayed bridge mainly include three parts:tower, main girder and stay cable.
以往对钢轨、轨枕及梁跨结构三者之间产生相对位移的计算模型，没有考虑轨枕位移的影响。
The rail, sleeper and beam have distinct relative displacement. In the former mechanics model, the influence of the displacement of the sleeper is not taken into account.
该装 置既能进行钢箱梁三向位置调整，又能保证梁段在平面内自 由滑动的支点结构。
The device is a fulcrum structure which can carry out three-dimensional position adjustment of a steel box girder and guarantee a beam segment to move freely in a plane.
该正交三梁模型可准确模拟基础刚度矩阵的各主元素和交叉项，简单实用，便于结构有限元建模，具有推广价值。
The present model, as a simplified, practical but precise method, can simulate foundation stiffness matrix including the principal terms and the cross terms. It is worthy of widely application.
研究表明：（1）三榀异形柱试验框架的破坏机制总体上属于梁铰机制，满足了框架结构抗震设计的要求；
The research shows that: (1) the failure process of these three specimens is all from the beams to the columns, so this pattern meets the requirement of seismic design;
提出了考虑梁板复合支撑和分段施工效应的深大基坑支护结构三维全过程计算方法，编制了三维全过程分析有限元程序。
A method to analyze behaviors of beam-slab braced foundation pits was proposed considering the effect of construction process. A 3d FEM program based on the model was developed.
本文以高架桥常见的结构形式桥面连续简支梁结构为例，建立三维有限元模型，进行了模态分析并与试验结果进行对比分析。
In the paper, the 3-dimension finite element model for bridge deck continuous simply-supported girder is established and model analysis is carried out with ANSYS.
本文以高架桥常见的结构形式桥面连续简支梁结构为例，建立三维有限元模型，进行了模态分析并与试验结果进行对比分析。
In the paper, the 3-dimension finite element model for bridge deck continuous simply-supported girder is established and model analysis is carried out with ANSYS.
应用推荐