由丁基橡胶在己烷溶液中氯化制得。
Obtained by chlorination of butyl rubber in hexane solution.
含约1%氯的丁基橡胶。
在发达国家，轮胎内胎几乎已全部由丁基橡胶制成。
In developed countries, almost all tubeless tire made of butyl rubber.
研究了炭黑填充丁基橡胶硫黄硫化体系的硫化特性。
The vulcanizing properties of CB filled IIR with sulfur curing system were researched.
目的研究丁基橡胶塞对普鲁卡因注射液稳定性的影响。
OBJECTIVE to investigate the effect of butyl rubber stopper on the stability of procaine hydrochloride injection.
采用丁基橡胶研制了用于中空玻璃单道密封的热熔胶。
A butyl rubber based adhesive for hot melt application as sealant for cavity-glass was prepared.
其中的橡胶基体可以为丁苯橡胶基体或丁基橡胶基体。
The rubber matrix can be styrene butadiene rubber matrix or butyl rubber matrix.
这种橡胶通过烯丙基氯可以比一般丁基橡胶更容易硫化。
Through these the rubber may be vulcanized more readily than normal butyl rubber.
目的：探讨免洗丁基橡胶输液瓶塞使用前是否需要清洗。
OBJECTIVE: to discuss the necessity of clearing the pharmaceutical butyl rubber stoppers for infusion bottles before use.
方法对注射液用卤化丁基橡胶塞在不同的温度下进行试验。
METHODS Halogenated butyl rubber stopper for injection was researched on different temperatures.
介绍了氯化丁基橡胶气密性基本原理及影响气密性能的因素。
In this paper, we introduce the airproof principle of butyl chloride rubber and the factors related to the airproof.
讨论试验条件对丁基橡胶抗生素瓶塞易氧化物测定结果的影响。
The paper discussed the effect of test conditions on measurement result of oxidables of butyl rubber bottle stoppers.
其主要材料是铝间隔条、弯角栓、丁基橡胶、聚硫胶、干燥剂。
Its main material is the corners, butyl rubber, plastic, desiccant and sulfur.
牌号的丁基橡胶是制造子午胎内胎和无内胎轮胎不可替代的材料。
IIR1751, which is available now is the non-replaceable material for manufacturing meridian tube and tubeless tyre.
丁基橡胶胶乳是电线、电缆及涂层织物和复合材料的极好绝缘材料。
In latex form it is an excellent insulating material for wires and cables, as well as for coating fabrics and composites.
其主要材料是玻璃、铝间隔条、弯角栓、丁基橡胶、结构胶、干燥剂。
Its main materials are glass, aluminum stripes, butyl rubber, structural adhesive and desiccant.
毕竟，口香糖由丁基橡胶制成，丁基橡胶也是制作轮胎和篮球的材料。
After all, gum's made from butyl rubber, the same stuff that goes into tires and basketballs.
本文介绍了丁基橡胶和卤化丁基橡胶国内外主要生产厂家及生产方法。
This article introduces the major manufacturers and the major production methods of butyl rubber and halogenated butyl rubber at home and abroad.
制造过程中产生的硫及其化合物，如：橡胶手套、氯丁橡胶和丁基橡胶。
Sulphur and compounds made from this process: i. e. Latex gloves, neoprene and butyl rubber.
高轮廓的音盆环绕设备采用丁基橡胶以允许更大偏差，因而产生更大输出。
The tall profile cone surrounds are of butyl rubber to allow greater excursion, and therefore higher output.
通过对丁基橡胶瓶塞切边工艺分析，确定了丁基橡胶瓶塞的切边模具结构。
Through the technological analysis of the trimming process for the isobutylene-isoprene rubber plugs, the structure of the trimming die has been determined.
对丁基橡胶市场、需求、应用情况进行分析，并对国内的市场前景进行了预测。
The market status, demands and applications of butyl rubber are analyzed, the market prospect in domestic is predicted.
研究了不同金属离子及胺中和的磺化丁基橡胶离聚体的熔融流动性及力学性能。
Melt flow properties and mechanical properties of sulfonated butyl rubber ionomers neutralized by different metallic cations and amines were studied.
这种新型的阻尼复合材料是由氯丁基橡胶，压电陶瓷粉体和乙炔炭黑混合而成。
The new type of damping composites is consisted of chlorobutyl rubber, piezoelectric ceramic powder (PZT) and acetylene black.
与丁基橡胶相比，BIIR焦烧时间和正硫化时间明显缩短，硫化速度大大提高。
Besides the scorch time and optimum cure time of BIIR were shortened considerably while its curing rate increased obviously.
结果与结论1。试验温度越高，注射液用卤化丁基橡胶塞的不溶性微粒脱落就越多。
RESULTS AND CONCLUSION 1. The more higher the temperature was, the more unsolvable particles separate from the halogenated butyl rubber stopper for injection.
欣闻江苏金浦集团和墨西哥kuo集团丁基橡胶合资项目，今天在南京举行签字活动。
Glad to hear of the Signing Ceremony held today in Nanjing for the NBR Joint-Venture Project between Jiangsu GPRO Group and Grupo KUO from Mexico.
本文研究了填料对氯化丁基橡胶在玻璃化转变温度以上的温度范围里的力学阻尼行为的影响。
This paper presents our study on the effect of fillers on mechanical damping of chlorinated butyl rubber above its glass transition temperature, Tg.
本文研究了填料对氯化丁基橡胶在玻璃化转变温度以上的温度范围里的力学阻尼行为的影响。
This paper presents our study on the effect of fillers on mechanical damping of chlorinated butyl rubber above its glass transition temperature, Tg.
应用推荐