本发明公开了一种测热型和风速计一体化流速传感器。
The invention discloses a heat measuring type and anemometer integrated flow velocity transducer.
提出了一种利用谐波反电势信号实现电机转子位置检测的新方法，设计了与电机一体化的新型位置传感器。
A novel method that USES the harmonic back EMF signal to extract the rotor position is put forward, and a new position sensor merged into an organic whole with the motor is designed.
典型的机电一体化元、部件有：电力电子器件及装置、可编程序控制器、模糊控制器、微型电机、传感器、专用集成电路、伺服机构等。
Typical electromechanical integration yuan, components are: power electronic devices and devices, programmable logic controller, fuzzy controller, micro-motors, sensors, ASIC, servo institutions.
该装置把反射式气动传感器固定在数控工作台的滑座上，组成了一个测控一体化的测量装置。
In the device, a reflective pneumatic sensor is fixed on the slide of numerical gallery to compose a measuring and controlling integrated measurement device.
传感器引线及其保护层应为一体化结构，与变送器模块的连接应采用厂家提供的标准。
The lead wire and its protective layer of the sensor shall be of one-piece construction, and its connection with variable conveying module shall subject to the Manufacturer's standards.
介绍一种新型结构的整流器和传感器一体化的电磁流量计，分析其对现场使用准确度的改善。
An improved electromagnetic flowmeter with integrated flowevehner and sensor is introduced, and analyse its influence on accuracy of local flowmeter.
多传感器融合智能检测机器人是以机器视觉技术为基础，光机电一体化的智能检测设备。
The multi-sensor fusion intelligent inspector based on machine vision technology is the intelligent inspection equipment integrated of optical, mechanical and electronic functions.
通过脉搏传感器时刻检测老人的身体状况．利用GPRS传送异常信号及GPS实时定位，实现老人的一体化监测。
With the help of pulse sensors to check up the elderly's physical fitness by GPRS transmitting abnormal signal and GPS realtime positioning to achieve monitoring integration for the elderly.
将传感器与信号调节电路利用厚膜电路工艺进行混合封装，完成了传感器的一体化，实现了传感器的小型化。
Sensor and signal regulating circuit is carried out through hybrid packaging by making use of thick-film circuit technology, which realizes integration and minimization of sensor.
新版本支持环境传感器和脉冲计数传感器，它将多个一体化的系统管理传感器统一到同一个无线网络。
The new version includes support for environmental sensors and pulse-count transmitters, enabling the integration of multiple building management sensors into the same wireless network.
这些设计方案分别基于运算放大器、仪表放大器以及集成一体化的传感器信号调理器等集成电路，分别满足不同档次的产品要求。
These solutions respectively base on ICs of Op Amp, instrumental Amp and full-integrated sensor signal conditioner, meet different-level products requirements.
该仪器为机电一体化产品，采用可编程序控制器控制，利用传感器判别被检部件是否失效及寿命长短。
This instrument is an electromechanical product, the programmable logic controller (PLC) is used for the control, and sensors are used for measuring the useful life of the parts detected.
经过一系列的实验测量与研究后，得出结论：用电涡流传感器对电机转子轴向与径向位移进行一体化测量时可行的。
After a series of experimental measurements and study, concluded: eddy current sensors on the rotor axial and radial displacement for integration measurements feasible.
上部连接体采用一体化设计，保证焊接的平整稳定，尤其配合刀具传感器和控制器可以对焊接的缝隙进行数字化调节。
Connecting the upper body using integrated design to ensure stability in the formation of welding, especially with the tool sensor and controller can be welded to the digital gap adjustment.
这种机电一体化的流体密度传感器在井下应用时必须进行井场刻度以及温度和压力的校正。
Wellsite calibration, temperature and pressure correction must be made while the sensor is used in the borehole.
阐述了手持式内置微型差动式电荷放大器和频率补偿电路一体化的发动机振动传感器。
A composite motor vibration transducer with differential charge amplifier and adaptive frequency compensating circuit is introduced.
AT 89 C52单片机作为系统的核心处理器，结合温度传感器、单相调压一体化模块来实现对清洗消毒机的程序化控制，并通过液晶显示屏实时显示系统工作状态、温度参数等信息。
This control system is composed of AT89C52 as a center the temperature sensor and module of voltage modulation. The working state and temperature are displayed on liquid crystal display.
针对采用导航与控制一体化系统，即导航与控制传感器共用、导航与控制计算机合二为一的某型水下航行器，提出了一种半实物仿真试验方案，进行了半实物仿真。
The project of the hardware-in-the-loop simulation was proposed based on the structure of the navigation and control integrated system for an underwater vehicle.
从曲轴上获取活塞位置信号时，所使用的上止点传感器及曲轴转角传感器在结构上趋向于一体化。
When obtain piston position signal from Crankshaft, Top Dead Center Sensor and Crankshaft position Sensor tend to be integrative in structure.
采用虚拟仪器技术、机电一体化技术、单片机技术、传感器技术于一体，研制了食品物性参数的自动检测和分析系统。
The food texture analysis instrument was improved based on LabVIEW which combined with the computer sys-tem integration and single chip technology to set up food texture detecting system.
驱动器内部藏有电阻应变式角位移传感器，具有机构、驱动、检测一体化的特点。
There is the micro displacement mechanism equipped with inner micro sensors in the module, which integrates mechanism, actuator and sensors.
将微机械加工技术应用于传感器研究，制备一体化薄膜生物传感器。
An integrated thin film microbiosensor was developed based on a micromachining techniques.
本实验室配备的光机电一体化柔性实训系统，由西门子PLC、机械传动机构、液压和气动机构、传感器器件、工业总线和WINCC监控系统等组成。
The lab is equipped with a flexible production line training system. It consists of Siemens PLC, mechanical transmission, industrial bus and WINCC monitoring system.
本实验室配备的光机电一体化柔性实训系统，由西门子PLC、机械传动机构、液压和气动机构、传感器器件、工业总线和WINCC监控系统等组成。
The lab is equipped with a flexible production line training system. It consists of Siemens PLC, mechanical transmission, industrial bus and WINCC monitoring system.
应用推荐