The grain size at a bending part is ensured by using the cold bending method.
采用冷弯方法，可以保证弯曲部位的晶粒度。
The pipe fitting is divided into a socket part (1) of two ends connected with a tube and a central bending part (2).
将管件分成与管子连接的两端的承插部分（1）和中间的弯曲部分（2）。
In this paper, the twice bending process for bending part with stiffners is analyzed and the proper structures of dies are designed.
分析了带有加强筋板的厚板弯曲件的两次弯曲成形工艺，并设计了合理的模具结构。
In this paper, die design for cut tongue bending part with double inclined plane and knife mouth are introduced, for cut tongue bending part with single plane.
在分析影响某折弯模具产品质量的主要原因基础上，针对折弯模具刀口斜面的磨削关键工序进行了专用磨床夹具设计。
Once a part has been programmed, however, the automated bending cell is ready to run—no breaks, no excuses.
但是一旦一个零件被编好程序，自动化折弯单元就开始运转，毫不停歇，毫无抱怨，效率显著。
The back is an important part of the golf swing because we use a lot of bending to create torque and power.
背部在挥杆时起著重要作用，因为我们要经常弯曲背部来进行扭转和发力。
A complex wood bending demonstration (Part II).
复杂的木材弯曲演示(下部)。
Another part customers should be aware of that is when bending the foot, make sure joint is at the right position, please see below image for reference.
另一部分客户应该注意的是，当弯曲的脚掌时，应确保关节位是在正确的位置，请参阅下面的图片。
Since the part is thin, multi-direction bending and springback is large, it is very difficult to decide the springback law using the usual compensation method.
由于零件厚度薄、多向弯曲、回弹量大且相互影响，用常规回弹补偿法很难确定回弹规律。
Automotive half shaft flange is a coupling part under the combined action of bending and torsion, its strength, loading and actual size have an uncertainty.
汽车半轴凸缘是受弯扭联合作用的联接零件，其强度、载荷及实际尺寸具有不确定性。
Through the design of bending die for the back hoop of silencer, die design analysis and die structure for large cylinder part considering springback compensation was introduced.
通过对消音器后环箍弯曲成形模的设计，介绍了考虑弹复补偿后，较大圆筒件成形模具的设计分析和模具结构。
The technological property of the fixing plate of the condenser was analyzed. The structure characteristics and working process of the bending die for forming the part were introduced.
分析了冷凝器固定板的工艺性，介绍了该零件弯曲成形模的结构特点和工作过程。
Aimed at the difficulties in the bending forming of punching parts, the bending die with dual-punch is designed, the complex shape of this part is once formed by the ordinal action of dual-punch.
针对该冲压件弯曲成形难的问题，设计了双凸模弯曲模，通过双凸模的依次动作可一次成形该零件的复杂形状。
A sheet metal radiator is a cost effective solution; its advantage is in the possibility of bending the contacts from the radiator part itself.
一个金属板散热器是一个符合成本效益的解决方案，其优点是可能的弯曲联系人从散热器部分本身。
CNC tube bending was developed based on the theory of vector tube bending and has improved on the quality and efficiency of the manufacture of tube part.
数控弯管是基于矢量弯管原理而发明的，数控弯管的应用大大提高了管件的加工效率和质量。
In this paper, based on the field investigation and analysis of Daliushu Dam located in Heishanxia Gorge, a part of the Yellow River, the sliding and bending deformation model is built up.
通过实地勘测研究，建立了黄河黑山峡大柳树坝址区岩体的滑移—弯曲拉裂松动变形模式。
FEM has been used to simulate and analyze the high pressure rubber forming process of part with flange bending.
利用有限元技术，对凸翻边钣金零件的高压橡皮成形过程进行模拟分析。
The bending of pump barrel will not happen as low part fixed pumping piston going downward that only happens when it works in heavy oil well.
而泵筒下部固定泵柱塞上行时，泵筒不会发生弯曲，只是其柱塞在稠油井中下行时泵筒才会发生纵向弯曲。
Three process composite die can carry out cutting and punching and bending in one process. The goodness of this technology is that productivity is high and part quality is generous.
使用新型三工序复合冲压模具，可以在一个工步中完成支承座毛坯的落料、冲孔和弯曲成形，生产效率高，工艺质量好。
Through analyzing the forming process of the comer pull buckle part, designed a cutting-bending-blanking progressive die. And introduced die working principle.
通过对转角拉扣五金零件的工艺分析，设计了一款切折弯曲落料级进模，同时对模具工作过程作了介绍。
The bending of separating magnetic piece and active spring locate the armature part, which increases flexibility of separating magnetic piece and chamfering to replace armature conveniently.
利用隔磁片的折弯及动簧实现衔 铁部分的定位，同时增加隔磁片柔度、增加倒角方便衔铁部分的更换。
Automatic bending machine is an important part of insulating glass production line, according to the actual developed a fully automated aluminum bending equipment.
铝条折弯机是中空玻璃生产线的一个重要组成部分，是根据国内实际的应用自主开发的一种全自动铝条折弯设备。
When occlusion by molar and premolar of fracture part, the stress of upper fracture part was bending force and the lower was compressing force.
患侧磨牙、前磨牙咬合骨断层应力分布下部为张力带、上部为压力带。
As the part, cover face shoes provides strength and support, and meanwhile make foot dorsum can freely, and will not be flexion bending the forepaws restrictions.
因该零部件，遮盖面部鞋提供力量以及支持，同时使足背自由，并将不会弯曲弯曲前脚掌的限制。
As the part, cover face shoes provides strength and support, and meanwhile make foot dorsum can freely, Jordan shoes, and will not be flexion bending the forepaws restrictions.
因该零部件，遮盖面部鞋提供力量以及支持，同时使足背自由，并将不会弯曲弯曲前脚掌的限制。
A bending chute is formed at the lower part of the car stop bar, the fixed seat is connected with a shaft pin in a penetrated way, and the shaft pin penetrates through the bending chute.
在挡车杆下部成型有折弯形滑槽，固定座上穿接有轴销，轴销贯穿折弯形滑槽。
Concrete is poured on the upper part inside the steel box in the span-center bending moment area to solve the problem of the insufficient pressing area of concrete on the top of the steel box girder;
跨中正弯矩区钢箱内上部浇筑混凝土，可解决钢箱梁顶部混凝土受压面积不足的问题；
Concrete is poured on the upper part inside the steel box in the span-center bending moment area to solve the problem of the insufficient pressing area of concrete on the top of the steel box girder;
跨中正弯矩区钢箱内上部浇筑混凝土，可解决钢箱梁顶部混凝土受压面积不足的问题；
应用推荐