It includes shear beam type, bending beam, single type, canister type and so on.
它包括剪切梁式，弯梁，单一型，筒型等。
The type of load cell that is being presented is basically similar to a bending beam type.
该类型的称重传感器是正提交基本上是类似的弯曲梁式。
Using the normal solutions of the governing differential equation, the general solution of a bending beam is obtained.
借助控制微分方程的标准基本解答组，获得梁弯曲问题初参数形式的通解。
The experimental results present that the strain of optic fiber Fabry-Perot sensor is better linear with loading of bending beam.
智能夹层中光纤法珀腔传感器的应变与载荷之间具有良好的线性关系。
The stochastic material parameter of bending beam can be integrated with its stochastic geometrical parameter into one stochastic parameter.
弯曲梁的随机材料参数和随机几何参数可结合为一个随机参数——弯曲刚度。
According to the bending beam theory, the distribution of both horizontal and vertical displacements can be calculated from the strains measured by the FBGs.
根据弯梁原理，由光纤布拉格光栅测得的应变结果可反算出大坝沿水平向和竖向的位移分布。
The OBBA series single ended bending beam load cell is designed for tension or compression loading applications including hopper scale and conveyor weighing.
OBBA系列单端弯曲梁式称重传感器是专为拉伸或压缩装载应用而设计，包括漏斗称重或输送称重。
Using FEM software of ANSYS to calculate vertical and horizontal bending beam, referencing the theoretical value, the appropriate subdivision number about beam is obtained.
用软件ANSYS进行简支梁的纵横弯曲计算，参照理论解，根据精度要求提出梁的参考剖分份数。
An improved K_ (IC) formula for indented bending beam method is proposed by considering the contribution from residual stress to the total stress intensity at the indentation flaw.
考虑残余应力对压痕弯曲梁应力场强度的贡献后，对相应的K _ (IC)表达式进行了修正。
Rotor blade connection according to claim 1 wherein individual elastomer dampers are arranged to provide a damping effect in a lead-lag bending direction of the support beam.
转子叶片方面，根据权利要求1，其中个别弹性阻尼器的安排，以提供一个阻尼效应在带头滞后弯曲方向的支持束。
If any of the LHC's 1, 200 bending magnets are even slightly tilted, he says, the beam would veer up or down out of the ring's plane.
如果LHC中的1200个扭曲磁铁中的任何一个有哪怕是轻微的倾斜，粒子束都会朝上或朝下发生改向，从而脱离环道平面。
For box systems, the gravity loads are transferred to the ground using a simply supported "post and beam" type system where the walls act as axial-loaded, (or combined axial plus bending), members.
盒子体系中，重力荷载是通过简支的“梁、柱”体系传递到地面的，而墙作为传递轴向荷载构件(并传递轴向附加弯矩)。
These formulae give us the stress and strain in a prismatic beam when it is subjected to pure bending .
当棱柱形梁受纯弯曲时，这些公式给出了它的主力和主变。
Based on the theory of the bending of non-prismatic beam, the paper has derived a rigidity matrix and the equivalent node load of the rigid-frame element with variable sections.
本文从非棱柱形梁的弯曲理论出发，推导出了变截面刚架元的单元刚度矩阵和等效结点载荷。
This paper deals with the mechanical behaviors of steel-concrete composite beam and effective width of concrete slab on the axial force and the bending moment together function, based on the past job.
本文在总结前人工作的基础上，对结合梁斜拉桥中在轴力和弯矩共同作用下的钢—混凝土组合梁截面受力状态和混凝土桥面板有效宽度进行研究。
The sun's gravitation was bending the beam of light.
太阳的引力使光束弯曲。
The paper discusses how to regulate the amplitude of bending moment within beam end for frame structure, and presents revisal Suggestions for previous designs.
对框架结构梁端弯矩应如何调幅问题做一探讨，对以往设计提出修正性的建议。
Finally, a numerical instance of rubber beam bending deformation is given to demonstrate that the method is highly accurate and self-adaptive in solving large deformation engineering problems.
通过给出橡胶梁弯曲变形的数值算例，说明再生核粒子方法在解决大变形等工程问题上有着精度高，自适应能力强等特点。
Classical bending theory of beam and plate can only be fit for thin and long beam and thin due to without considering deformed influence of cross shearing.
经典的梁板弯曲理论由于未考虑横向剪切变形的影响而只能适用于细长梁和薄板。
On Basis of composite mechanics, an analytical model of composite beam under bending is established and the corresponding deformation response is formulated.
根据复合材料力学，建立了弯曲条件下复合梁的分析模型，并导出了相应的应变响应关系。
It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.
首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。
The bending problem of a cantilever beam made of transversely isotropic piezoelectricity medium under uniformly distributed loading is studied.
对由横观各向同性压电介质构成的悬臂梁在均匀分布荷载作用下的弯曲问题进行了研究。
After reduce the bar's free vibration differential equation to a lower order, we analogize it to the bending theory of the beam and gives an iterative procedure.
将杆作自由振动的微分方程作降阶处理后，和梁的弯曲理论作类比，给出了一个迭代算法。
The convolution type functional was offered for the bending of viscoelastic beam column with damage and the generalized variational principle of viscoelastic beam column with damage was presented.
提出了以卷积形式表示的梁-柱弯曲问题的泛函，并给出了损伤粘弹性梁-柱的广义变分原理。
The results show that steel fiber reinforced ferroconcrete t beam possesses high bending strength and excellent crack resistance property.
结果表明，钢纤维增强钢丝网混凝土T形梁具有较高的正截面抗弯强度和良好的抗裂性能。
The three-magnet bending system is suitable for linac beam deflection of free-electron-laser facility.
这种结构紧凑的三磁铁偏转系统适用于自由电子激光器的束流传输。
According to the engineering theory of plastic bending, the elastoplastic bending analysis of a beam is conducted using differential quadrature method.
根据梁塑性弯曲的工程理论，采用微分求积法进行了梁的弹塑性平面弯曲分析。
Meanwhile, the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam.
同时，应用该回弹势能原理于纯弯曲梁的回弹变形计算。
In this paper, initial parameters method for the bending problem of thick beam with shear deformation is presented.
提出了考虑剪切变形时深梁弯曲问题的初参数法。
In this paper, initial parameters method for the bending problem of thick beam with shear deformation is presented.
提出了考虑剪切变形时深梁弯曲问题的初参数法。
应用推荐