When the battery surface temperature is in the phase change temperature range, the cooling effect is not obvious by continuing increasing material thickness and convective heat transfer coefficient.
当电池表面温度处于相变材料的相变温度区间时，继续增加材料厚度和对流换热系数散热效果不显著；
Initially, the plan to power the robot involved covering its surface with solar cells that would charge a lithium polymer battery inside.
最初计划用覆盖在机器人表面的太阳能电池板给内部的锂聚合物电电池充电来给机器人供电。
The oxygen, which will be drawn in through a surface of the battery exposed to air, reacts within the pores of the carbon to discharge the battery.
通过电池暴露在空气中的表面所吸入的氧气在碳孔中进行反应为电池放电。
The surface and the atmosphere form a giant battery, as the lightning discharges of thunderstorms demonstrate.
就像在暴风雨中闪电释放大量电能所证明的那样，地表和大气层间形成了一个巨大的电池。
Place battery cover on a level surface.
将蓄电池罩放在水平面上。
Cathode surface, led to the decrease of the internal resistance increases, activity, make Germany sunshine greatly shorten the service life of battery.
阴极表面，导致内阻增大、活性下降，使德国阳光蓄电池的使用寿命大大缩短。
Oxygen drawn in through a surface of the battery exposed to air reacts within the pores of the carbon to discharge the battery.
氧，(空气)通过电池表面的反应，暴露在空气中的毛孔内的碳，排放电池。
They posses a high surface area for better electron transfer, which can lead to the improved performance of an electrode in an electric double capacitor or battery.
纳米多孔金属材料由于其较高的表面积所以拥有良好的电子传输特性，这正好改善了其在导电双电容或电池上的电极性能。
The earth's surface, upon which we stand, is the zero volt end of that battery.
在地球的表面，就在我们站立的地方，是这个巨大电池的零电位。
ZnO can be used to fabricate transparency electrode, piezoresistor, cell battery window, surface acoustic wave device, gas sensor and light-emitting diode etc.
它可以被用来制作透明电极、压敏电阻、太阳能电池窗口、表面声波器件、气体传感器、发光二极管等。
ZnO thin films can be used to fabricate transparency electrode, piezoresistor, cell battery window, surface acoustic wave device, gas sensor and light-emitting diode etc.
它可以被用来制作透明电极、压敏电阻、太阳能电池窗口、表面声波器件、气体传感器、发光二极管等。
The membrane solar energy battery is arranged on the outer surface of the shell and used for providing electric energy for the semiconductor cooling device.
所述薄膜型太阳能电池设置于所述外壳的外表面，用于向所述半导体致冷器提供电能。
Bing Hu, a post-doctoral fellow, prepares a small square of ordinary paper to with an ink that will deposit nanotubes on the surface that can then be charged with energy to create a battery.
兵，后胡博士后研究员，准备了普通的小广场上的文件与墨水，将沉积在，然后可以以能源费用，创造一个电池表面的纳米管。
Battery protection board do not touch the cell surface in order to prevent from destroying cell when you assembling.
装配时保护板不要直接接触到电芯表面，以免损坏电芯。
The use of the additives can increase the battery cycle life, charge acceptance, surface area of negative active mass and stabilization of its structure.
使用负极板添加剂可以增加蓄电池寿命，提高充电接受能力，增大负极活性物质表面积并稳定其结构。
The RVC with high surface area for the collector of lead-acid battery has been introduced.
介绍了一种高表面积的网状结构的玻璃碳（RVC）铅酸蓄电池板栅。
The invention also aims to provide a metallic lithium electrode whose surface is covered in a film of metallic oxide particles, as well as a lithium metal-type battery.
本发明还涉及锂金属电极，其表面覆盖金属氧化物颗粒的膜，还涉及锂金属型电池。
If you have any surface treatment requirements on battery cans, we are more than happy to work together with you to come up with a possible solution.
如果您有任何关于电池表面处理的要求，我们非常乐意与贵司合作，一起来寻求最佳的解决方案。
The conception of the precision of the main parts for dry battery application and the working chart of the tolerance of the dimension and shape and the coarse degree of the surface were put forward.
本文提出了干电池主要零配件的精度概念以及尺寸公差、形位公差、表面粗糙度等精度要求的工作图表达形式。
The cyclic voltammetry, the linear sweep, SEM observation and surface analyzing technology were used to study non uniform characters of valve regulated lead acid battery.
采用循环伏安、线性扫描、电镜扫描观察及表面能谱分析等方法对阀控密封铅酸蓄电池的板栅部分不均衡性进行了研究。
One-dimensional carbon materials have potential applications in fuel cell, lithium ion battery and chemical sensor due to their high specific surface area and good conductivity.
碳材料具有稳定的物理化学性能，分布广而易得，而一维碳材料具有高的比表面积，良好的导电性。
Hydrogen-absorbing alloy, method of surface modification of the alloy, negative electrode for battery and alkaline secondary battery.
储氢合金，合金表面改性方法，电池和碱性二次电池负极。
In addition, the battery electrolyte liquid surface plate must be higher than 10-15 millimeter, should add distilled water shortage in time.
另外，蓄电池的电解液液面必须高于极板10 - 15毫米，不足时应及时添加蒸馏水。
The outer surface of Exit should be disassembled easily, battery and inner spare parts also should be replaced, repaired and inspected easily.
标志灯外壳必须容易拆卸，电池和内部零件必须容易更换、修理和检视。
The problem, on the surface is major because the laptop is useless once the battery power is exhausted.
问题很简单，当电脑电池耗尽后将不能再工作。
The problem, on the surface is major because the laptop is useless once the battery power is exhausted.
问题很简单，当电脑电池耗尽后将不能再工作。
应用推荐