The following Suggestions are based on the method of interoperability for a deployment based upon the way that ClearQuest is implemented and the need for a transfer of data between products.
接下来的建议基于部署的互操作性方法,这种部署建立在ClearQuest实施的方法的基础上,以及产品之间数据转移的需要。
Moreover, an optimization scheme for heat exchange station control system is proposed based on the method and principle of automatic control.
同时,提出了基于自动控制理论思想和方法的换热站控制系统优化方案。
Fe storage condition in bone marrow was observed based on the method of bone marrow Fe staining.
采用骨髓铁染色法观察骨髓贮存铁的情况。
The top-down inductive program synthesis is based on the method of identification by enumeration.
自顶向下的归纳程序综合基于枚举识认方法。
A new class of digital image scrambling algorithm based on the method of queue transformation is proposed.
提出了一种基于队列变换的数字图像置乱新算法。
The present indexes for the effectiveness of the defense system are mostly based on the method of statistics.
目前防御体系的作战有效性分析多采用统计试验方法。
In this paper, the chaotic motion of a double-pendulum is suppressed efficiently based on the method of periodic force.
本文基于外加周期激振力信号作用首次对双杆摆机构的混沌运动进行了有效的控制。
The realization of chaos secure communication based on the method of interval synchronization recalling memory is provided.
介绍了基于区间同步恢复记忆实现混沌保密通信的方法。
A new approach based on the method of slices to analyze the stability of slopes with non-circular slip surface is presented.
提出了一种新的非圆弧滑动边坡稳定分析算法,该算法直接建立在条分法的基础上。
A method for simplified free-wheeling diode is proposed in this paper, which is based on the method for traditional free-wheeling diode.
针对传统的续流二极管检测方法存在的不足,本文提出了一种简化的续流二极管检测方法。
Secondly, the theory and method of folding carton structure CAD system based on the method of piecing together are studied and discussed.
然后,重点研究和探讨了基于拼合法折叠纸盒结构CAD系统的理论和方法;
Cumulative sum control charts are used to monitor the boiling and the parameter optimisation is discussed based on the method of integral equation.
采用累积和控制图进行变点检测,基于积分方程法讨论了控制图参数优化方法。
In the evaluation of highway steel truss Bridges based on the method of fracture mechanics, the plane fracture toughness K IC must be detected firstly.
应用断裂力学方法对公路钢桁桥的安全性能进行评估中,必须首先测出平面应变断裂韧度KIC。
Moreover, based on the method of finite element analysis and the general software, the failure behavior of high density syntactic foams is investigated.
还利用计算机和通用软件对高密度复合泡沫塑料进行了有限元分析,研究了高密度复合泡沫塑料的失效行为。
Recognition result based on the method shows that the method achieves excellent performance in terms of recognition error rates and recognition efficiency.
对字符样本的识别结果显示,此方法在识别错误率和识别效率等方面均有很好的效果。
A new way to calculate the stiffness factor of the slope bar in structural mechanics based on the method of instant center in mechanics of theory is presented.
以理论力学瞬心概念为基础,结合结构力学位移法,提出了一种计算斜杆刚度系数的简易方法———瞬心法。
Mathematical morphology was applied to gain source images structural features and the pairs of registration points of the images can be chosen based on the method.
应用数学形态学的方法提取源图像的结构特征,并在此基础上选择图像的相关配准点。
Here the measurement errors due to acoustic focusing of typical sound sources are analyzed by detailed examples based on the method of image sources in the Ray Theory.
基于射线声学的虚源法,通过具体算例,分析了典型声源声聚焦引起的测量误差。
Moreover, a weight optimization scheme for the multi-kernel was proposed by maximizing the Margin Maximization Criterion(MMC)based on the method of Lagrange multipliers.
进而,使用拉格朗日乘子法优化最大边缘准则(MMC),提出了多重核权值优化算法。
Taking the Wuhekong bridge as the engineering background, the method of optimization of cables tensions for PC cable-stayed Bridges is set forth, based on the method of I.
以宿淮高速公路段五河口斜拉桥为工程背景,阐述采用索力对主梁应力的影响线法来优化PC斜拉桥施工索力的方法。
In this paper, a major study is distributed attitude measurement system based on the method of photographic measurement, and applied to the study of deck deformation field.
在本论文中,主要研究以摄影测量方法为基础的分布式姿态测量系统,并应用到甲板变形测量领域。
The KBS for optimizing electricity cost was established by researching something about generation cost based on the method of combining mathematic model with knowledge model.
采用数学模型和知识模型相结合的方法,对发电企业的发电成本相关问题进行研究,建立了发电成本优化决策知识库系统。
The relationship between three-dimensional grain morphology characteristics and random cross-sectional parameters has been established based on the method of simulation slicing.
本文通过仿真切割的方法建立晶粒三维空间形貌特征与其随机截面形貌参数之间的关系。
BP neural networks model of the main spindle system of the grinder is built and the structure model updating and optimization calculation are carried through based on the method.
基于此法建立了磨床主轴系统的BP神经网络模型并进行了结构修正与优化计算。
This paper introduces a realization project of telecommunications integrated network management system based on object orientation. The project is based on the method of object service.
介绍了一种基于面向对象的电信综合网络管理系统的实现方案,此方案基于对象服务机制。
In the part of road engineering project risk evaluation, this paper puts forward the method of fuzzy and utility risk evaluation based on the method of fuzzy and utility risk measurement.
在公路工程项目风险评价中,本文基于模糊效用风险度量法提出了模糊效用风险评价法。
After discussing existing methods of construction simulation, an ameliorated analysis method of cycle-forward is developed, which is based on the method of cycle-forward and ANSYS software.
在总结现有施工模拟方法的基础上,结合循环前进分析法和有限元软件Ansys,提出了改进的循环前进分析法。
In order to enhance the speed of robotic vision system image processing, the optical wavelet transform is applied to vision system based on the method of photoelectric hybrid implementation.
为了提高机器人视觉系统的图像处理速度,利用光电混合实现的方法,将光学小波变换应用于视觉系统。
To have radio fuze making better resistance to HPM jamming, the slot coupling characteristics of HPM pulse into cavity are studied by using the software XFDTD6.0 based on the method of FDTD.
以提高无线电引信抗高功率微波干扰的能力为应用背景,采用基于时域有限差分方法(FDTD)的电磁场仿真软件XFDTD6.0,数值模拟高功率微波(HPM)的孔缝耦合特性。
To have radio fuze making better resistance to HPM jamming, the slot coupling characteristics of HPM pulse into cavity are studied by using the software XFDTD6.0 based on the method of FDTD.
以提高无线电引信抗高功率微波干扰的能力为应用背景,采用基于时域有限差分方法(FDTD)的电磁场仿真软件XFDTD6.0,数值模拟高功率微波(HPM)的孔缝耦合特性。
应用推荐