Study on Microstructure of Ni-based Alloy;
可熔的铋基合金，在华氏度熔化。
Additive EA-2 for zinc based alloy electroplating was synthesized.
研制了一种锌基合金电镀添加剂ea - 2。
Cobalt - based alloy is a kind of important materials used in elevated temperature.
钴基合金是一种重要的高温材料。
Ni-based alloy with Y2O3 and composite modifier was used to repair cast defect in blade.
采用自配的添加稀土氧化物Y2O3和复合变质剂的镍基合金粉末对叶片铸造缺陷进行激光熔覆修复。
The core of a plasma torch is a pair of electrodes, usually made from a nickel-based alloy.
等离子体炬的核心部分是一对电极，通常用以镍为基础的合金制成。
Zinc based alloy electrodeposits have been emphasized for their excellent corrosion resistance.
锌基合金电镀层由于具有优良的耐蚀性而受到人们的关注。
With Zn-based alloy as filler metal, a fluxless soldering method for joining Al foams with porosities of 74.
不同孔隙率的泡沫铝采用无钎剂钎焊方法进行连接实验。
The hot deformation behavior of a self-developed zinc based alloy was investigated by isothermal compression test.
采用等温热压缩试验对一种自行研制的高强度易切削锌基合金进行热变形行为的研究。
The mechanism of Fe-based alloy coating for thermal fatigue damage resistance of wheel cast steel was analyzed by SEM.
用扫描电镜分析研究了铁基合金涂层对车轮铸钢材料抗热疲劳损伤机制的影响。
The hydrogen diffusion behavior of AB5-based alloy at low temperature is studied by constant potential step technique.
用恒电位阶跃法研究了低温下ab5型储氢合金中的氢扩散行为。
The temperatures of whisker ceramic tool JX-1 when machining air-nickel based alloy GH761 at a range of speeds were measured.
同时对晶须增韧陶瓷刀具在不同速度下切削航空镍基合金GH761时的切削温度进行了测量。
The technology has got better, too. The core of a plasma torch is a pair of electrodes, usually made from a nickel-based alloy.
该项技术也有所提高，电浆火炬的主要成分是一对电极板，主要由以镍为主的合金制成。
The frequent faults in formed blanking die of Zn-based alloy was introduced. And some methods to solve the faults were put forward.
介绍了用锌基合金材料制作的冲裁模具成型后常见的缺陷，并提出了相应的解决办法。
On the matrix of carbon steel, two Co based alloy coatings with addition of rare earth elemerts (RE) were obtained by means of heating.
用不同加热工艺在低碳钢上制取了两种钴基及含稀土钴基合金涂层。
The research results of the paper can meet the requirements about qualitative analysis and semi-quantitative analysis of Mg-based alloy.
结果可用于镁合金基体鉴别及各成分元素的定性和半定量分析。
The microstructure and wear resistance of Ni based alloy coating on the high temperature alloy GH33 by laser melt casting have been studied.
研究了高温合金GH33表面激光熔铸镍基合金涂层的组织和耐磨性能。
A method was approached about making a gradient coating of self-melt Co-based alloy on 20 steel substrate with rare earth(RE) by laser cladding.
采用稀土变质及激光熔覆工艺在20号钢基体上获得了钴基自熔合金梯度组织涂层。
Objective: To study the damages made by metal-tip or carbon-tip ultrasonic scaling on the surfaces of Ni-Cr alloy, Pd-based alloy and Ag-Pd alloy.
目的：研究两种洁治器洁治前后镍铬、钯和银钯全冠合金表面形貌的变化。
The method was developed for the matrix determination and the component analysis by the character line in Ni-based alloy based on digital simulation.
在镍基合金可见光谱计算机模拟基础上，研究利用镍元素及成分元素特征谱线进行基体鉴别和成分元素分析的方法。
In this paper, the influence of surfacing technology and material on the quality of light beam Ni based alloy powder surfacing layer was investigated.
研究了堆焊工艺和材料对镍基合金光束粉末堆焊质量的影响规律。
For its high density, high strength and good ductility, the tungsten-based alloy used in armor-piercing and armor-exploding has attracted wide attention.
钨基合金由于密度高、强度和延性好而用作穿、破甲材料越来越引起国内外的关注。
The results indicate that the hardness and wear resistance of deposited layers of nickel-based alloy powder increased evidently compared with the substrate.
试验结果表明：镍基合金粉末堆焊层硬度和耐磨性较基体有显著提高。
The structure and property of a new Co-based alloy by laser cladding were studied in this paper. The alloy was researched on the basis of 204 Co-based alloy.
阐述了一种新型钴基合会激光熔覆后的组织与性能，该合金是在204钴基合金成分的基础上研制的。
The paper expounds the concrete welding technique and technical measure in detail, and has certain reference value to nickel-based alloy material's field weld.
文章针对现场焊接工艺和技术措施做了较详细的阐述，对镍基合金材料现场施焊有一定参考价值。
The visible spectrum characteristics of the copper matrix and component in Cu-based alloy were(studied) with computerized digital simulation processing technique.
对铜合金可见光谱线进行了计算机数字模拟处理，研究了基体元素铜和各成分元素的可见光谱特征。
The relationship between annealing cracks and heating temperatures of Ni-based alloy cold-formed billets and the causes of annealing crack occurrence are studied.
研究了镍基合金冷变形管坯退火裂纹与加热温度的关系和退火裂纹产生的原因。
Selectamark's technology also USES microdots, though instead of celluloid it employs polyester or a nickel-based alloy, depending on the type of adhesive involved.
Selectamark公司的技术也是用微粒，虽然用聚酯或者镍基合金代替明胶，使用何种微粒与粘着剂的类型有关。
This is a soft nickel-based alloy used for making dental crown and bridge. Since is relatively soft, it can reduce wear of paired jaw teeth. Its processing is easy.
这是一种镍基软质合金，用于铸造冠、桥，因合金质软所以减轻对颌牙磨损，易操作。
Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.
以鞍座泡沫塑料垫成型模为例，阐述了曲面型腔模具的锌基合金铸模工艺，同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。
Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.
以鞍座泡沫塑料垫成型模为例 ，阐述了曲面型腔模具的锌基合金铸模工艺 ，同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。
应用推荐