A kind of hardware platform based on PC, MCU and FPGA is given for fingerprint collection, processing and displaying. It has a good performance and easy to be achieved.
针对指纹图像的采集、处理、显示，提出一种性价比好且易于实现的基于PC机、单片机和可编程逻辑器件的硬件平台。
There exists great limitations in architecture and performance on open nc based on PC.
以PC为基础的开放式数控系统在结构和性能上都存在很大局限性。
This paper introduces the traditional control method of Gyro temperature control system, and gives the digital PID control method of the gyro temperature control based on PC/104.
介绍了陀螺温控系统的传统控制方法，并在此基础上提出了基于PC/104的数字PID控制的陀螺温度控制方法。
The data storage and distribution based on PC clusters is one of critical problems in parallel database.
基于机群系统的数据存储分布是并行数据库领域的一个重要问题。
In this paper, we briefly introduce some relevant techniques of VR virtual modeling and virtual walkthrough, and we design and implement a virtual campus walkthrough system based on PC.
本文在对虚拟现实、虚拟建模、虚拟漫游等相关技术作了介绍，并设计与实现一个基于PC机的桌面式校园虚拟漫游系统。
A design of the open motion control system based on PC and motor control card was presented.
提出一种基于PC和运动控制卡的开放式运动控制系统的设计方案。
To adapt to the trend in development of open CNC system and modem manufacture technique, a CNC principle experimental instructional system based on PC is developed.
为适应开放式数控系统及现代制造技术的发展趋势，开发研制了基于PC机的数控原理实验教学系统。
Finally, the software realization of DRM based on PC is introduced.
最后，介绍了DRM信道编码基于PC的软件实现。
It's a simple, reliable and effective method for developing medical instruments based on PC computer.
这种基于PC开发医用电子仪器的方法是简单、可靠并且有效的。
Developing a system of multiple cameras human detection and tracking based on PC.
基于PC机终端开发了一个多摄像机人体自动检测与跟踪系统。
Numeric control system based on PC is applied in controlling 3d wire forming machine.
将基于PC的数控系统应用于3d线材成型机的控制。
A spectrogram based on PC is presented.
介绍了一种基于PC的语图仪。
This thesis gives us a dairy cow precision feeding system based on PC and SCM, discusses the design of its hardware and software.
开发了由PC机为管理平台基于单片微机控制的奶牛精量饲喂系统，介绍了系统的硬件、软件设计等方面的问题。
This paper introduced the interface modes of programmable synthesizer, and designed a control unit based on PC print port.
介绍了可编程控制频率合成器接口类型，设计了一种基于PC并口的频率合成器编程控制装置。
The design of a practical virtual instrument based on PC bus is introduced.
结合实际例子详细介绍了基于PC总线的虚拟仪器的设计过程。
At present, the large capacity phonetic recording instrument is based on PC, whose cubage is large and cost is much.
目前，使用的大容量语音记录仪是基于PC机的，其设备体积大，成本高。
The paper introduces the related technology of the SoftLogic control and PC/104, and expatiates the implementation of SofiLogic control system based on PC/104 controller.
介绍了软逻辑控制和PC/104的相关技术特点，论述了基于PC/104的软逻辑控制系统的实现。
The realization of audio and video subsystem in videophone based on PC is introduced in this paper.
本文介绍了基于PC的可视电话音频视频子系统的实现。
The features and applicable areas of software PLC based on PC platform and module inserted PLC are presented.
介绍了基于PC平台的软件PLC和插卡式PLC的特点和应用场合。
With the application of serial communication technology in data acquisition and data analysis, the compressor testing system based on PC for the train air conditioning was developed with VB.
利用VB开发的基于PC机的列车空调压缩机测试系统，采用串口通讯技术进行数据采集与分析。
NC system based on PC has now entered the stage.
数控系统从此进入了基于PC的阶段。
At last, the hardware in the loop simulation system for three-axis stabilized satellite attitude control based on PC, with reaction wheel and gyro in the loop is designed.
最后，该文设计了一个基于PC机的三轴稳定卫星姿态控制硬件在回路仿真系统，将反作用飞轮、陀螺等实物接入仿真系统。
This article introduces a digital video monitor-control system based on PC, and gives the function modules, system frame diagram and some source codes.
介绍了一种基于PC的数字视频监控系统，给出了整个监控系统的功能模块、系统框架图及部分源代码。
A high precision temperature measuring system based on PC was introduced.
本文介绍一种基于PC机的高精度实时温度自动测定系统。
A design of CATV signal on-line monitoring system based on PC is given.
给出了一种基于微机的有线电视信号在线监测系统的设计。
This paper describes the multiteststation based on PC for gear-drive system, including method of measurement, software and parallel processing architecture with two stages.
本文论述了基于微机的齿轮传动系统复合测试站，包括测量原理、两级并行处理系统结构和软件结构等。
The open four-axis CNC system based on PC and motion control card can accomplish the cutting of various-angle welding plate.
并以基于PC和运动控制卡的开放式四轴数控系统实现支管端头的变角度焊接坡口面切割。
USB is an important technology based on PC.
它是一种应用在PC领域的新型接口技术。
With development of PC and graphics hardware, rendering systems based on pc-cluster which are cheaper and powerful can also do that work.
随着PC和图形显卡的飞速发展，基于PC集群的绘制系统以其廉价而强大的能力恰能满足要求。
With development of PC and graphics hardware, rendering systems based on pc-cluster which are cheaper and powerful can also do that work.
随着PC和图形显卡的飞速发展，基于PC集群的绘制系统以其廉价而强大的能力恰能满足要求。
应用推荐