The near-axis field distribution of circular aperture antennas is obtained by numeric integration method.
采用数值积分方法分析了圆口径天线非轴向近场分布特性。
And, if you take a vector field where maybe everything is rotating, a flow that's just rotating about some axis, then you'll find that its divergence is zero.
如果取一个有旋的向量场，流体流动方向是环绕某个坐标轴的，那么就会发现它的散度是零。
When an electric field is applied to the electrodes the piezoelectric material translates this into a mechanical strain along its radial axis, causing it to vibrate.
当两个电极之间形成电场时，压电性物质便将电场转化为沿径向轴的机械压力，使纤维震动。
When the visitors type in the data their eyes are fixed across the vertical axis at the left to the input field.
当用户输入数据的时候，他们的眼睛固定在纵轴输入框左侧的交叉点上。
Of course, you can also do it geometrically because geometrically, you can see in the picture along the X-axis, the vector field is pointing vertically.
当然，你可以直观地算出来是因为，你可以直观地在图上看出x轴上，向量场是垂直指向的。
The monitoring principle which includes machine tool vibrancy, principal axis displacement, cutting tool temperature, cutting force of cutting tool, temperature field of turner is discussed.
论述了对机床的振动、主轴的位移、刀具温度、刀具切削力、旋转工件温度场进行监测的原理。
That is a vector field in which the trajectories are going to be circles centered in the z-axis and our vector field is just going to be tangent to each of these circles.
这是一个向量场，其中旋转轨道是，以z轴为圆心的圆周，并且这个向量场与每个圆相切。
When using universal finite element software to analyze PMSM, the relative position of stator and rotor axis is unknown, which is the precondition for load field calculation.
当采用通用有限元软件对永磁同步电动机进行分析时，存在着电机定转子轴线相对位置未知的问题，而确定这个相对位置是进行电机负载磁场计算的前提。
It is proved that the tilted axis cranking (TAC) model is equivalence to the particle rotor model (PRM) under the semi classical and mean field approximations.
阐述了剪刀带的形成机制，并论证了在半经典近似和平均场近似下，倾斜轴推转模型与粒子转子模型等价。
The results show that the maximum of the exchange bias field departs from easy axis with increasing the biquadratic-coupling field or bilinear field.
结果表明：随着双线性耦合场或双二次耦合场的增加，交换偏置场的最大值位置向易轴靠近。
Field data were analyzed. It showed that axis force increased along with pipe jacking at the very start, and it maintained stated basically when jacking to a certain distance.
实测数据分析表明，管节开始顶进时轴力随顶进距离增大而增大，顶进到一定距离后，基本维持在一定范围内。
The field distribution along the axis can be measured by using HALL magnetometer (CT5).
在不同激励电流下，用Hall探极磁场计(ct5)分别测量了沿轴磁场分布。
The phase mapping method of a field inhomogeneity based on an Z axis pulse field gradient and polynomial fitting procedures of the axial shimming coil currents were described.
通过对Z轴磁场梯度和匀场线圈电流的多项式拟合，以获得磁场不均匀而引起的相位分布。
This article calculated out the field intensity of a electric dipole uniformly moving along the axis of the dipole using the transformation relation in the relativistic theory.
本文利用相对论变换关系计算了沿轴线方向匀速直线运动的电偶极子的电场。
The arc-plasma jet in jested into the reactor exerted influences on the flow field in the hear-axis zone, while no influences in the transition and the near-wall zones.
喷入电弧等离子体射流对等离子体反应器流场的影响区域是近轴区，对过渡区和近壁区没有影响。
Field structure, microstructures and quartz C-axis analysis all indicate sinistral shear sense of the ductile shear belt.
野外构造、显微构造与石英C轴组构分析皆指示为左旋走滑韧性剪切带。
We intentionally render the rotational axis of growing crystal to deviate from the symmetry axis of the temperature field, the temperature fluctuations with sinusoidal form in meniscus are produced.
使晶体转轴与温场对称轴不一致，则在晶体弯月面内会产生随时间变化的正弦波式的温度分布。
This paper summaries the researches on the application of the technology of image analysis, distance transformation and medial axis transformation, to the field of computer graphics.
本文是将图像分析技术—距离变换与中轴变换—应用于计算机图形学领域研究工作的一个总结。
Vibration tube in the magnetic field vertically brings about magnetostriction under the effect of alternate magnetic field, that is axis resonance.
当振管垂直立于磁场环境中时，在交变磁场的作用下产生磁致伸缩，即沿振管的轴向作简谐振动。
Under the circumstances of axial symmetric and non-static current distribution, a method for calculating off-axis electromagnetic field is given by using Maxwells equations and axial symmetry.
在轴对称非静态电流分布的情况下，利用麦克斯韦方程组和轴对称性，给出了轴外电磁场的一种计算方法。
The distribution of electric field in eccentric cylinder capacitors is discussed according to the electric axis law.
用电轴法讨论了偏心电容器内的电场分布，概括了平行园柱形带电导体间电场分布的一般情况。
We discussed the stability of both radial movement and axis movement of charged particle in infirm focusing magnetic field and obtained the term of stability.
我们探讨了弱聚焦磁场中带电粒子轴向和径向运动的稳定性问题，得到稳定性条件。
Based on a north-south mirror field, the equation for estimating the end losses was derived from analyzing the angle between incident sunlight and the tacking axis of a reflecting mirror.
基于南北向菲涅耳反射镜场，该文从分析入射太阳光线与反射镜单元跟踪轴线之间的夹角出发，导出了反射光线到达接收器时在南北向偏离的距离（即端部损失）的计算公式。
The electromagnetic field of a linear electric quadrupole moving uniformly along the axis of the quadrupole has been calculated with the relativistic transformation relation.
利用相对论变换关系计算了沿轴线方向匀速运动的线性电四极子的电磁场。
This paper discusses the magnetic field on the axis in a current-carrying sparse winding solenoid with limited length.
讨论了有限长载流疏绕螺线管内轴线上的磁场，并与载流密绕螺线管内轴线上的磁场作了比较。
Computation of the magnetic field, which is produced by a charged body rotating about a fixed axis, is a classical question about magnetostatic boundary-value problem.
求定轴匀角速转动带电体的磁场是一类典型的静磁场边值问题。
The time field analysis module contains the timely wave return, digital filter, axis center track analyzing, demodulation analyzing, trend analyzing, mutual analyzing.
时域分析包括时域波形回放、数字滤波、轴心轨迹分析、解调分析、趋势分析、相关分析。
The principle of holographic ct measurement is introduced briefly, and to the reconstruction of axis symmetry field measured by optical ct, zoned method is discussed.
简要讨论全息CT测量原理，针对光学CT测量中轴对称场的重构问题讨论了环带法。
The principle of holographic ct measurement is introduced briefly, and to the reconstruction of axis symmetry field measured by optical ct, zoned method is discussed.
简要讨论全息CT测量原理，针对光学CT测量中轴对称场的重构问题讨论了环带法。
应用推荐