The influence of halide ions on anodic process of iron in alkaline solutions has been studied by electrochemical techniques.
用电化学测试技术研究了碱性溶液中卤素离子对铁阳极过程的影响。
Furthermore, the preparation process of the cooling device basing on aluminum anodic oxidation process is presented.
在此基础上，研究了基于铝阳极氧化的冷却装置模型制备工艺。
The anodic oxidation process of aluminum in sulfuric acid was investigated using constant voltage electrolysis method.
采用恒电压电解法研究了铝在硫酸中的阳极氧化过程。
A new green sealing process of anodic oxide film of aluminum alloy was studied in this paper.
本文研究了一种铝合金阳极氧化膜新型的绿色封闭工艺。
The typical equipment, the basic principle and arc plasma process of anodic vacuum arc coating are presented.
介绍了阳极真空电弧镀膜方法的镀膜装置、工作原理及电弧等离子体微观过程。
This series LED is used for indoor and outdoor lighting, the light body using high quality aluminum, surface anodic oxidation process.
此系列LED用于室内室外照明，灯体采用高质量铝材，表面阳极氧化处理。
It is shown that the tip induced oxidation process can be considered as electrochemical anodic oxidation.
实验说明针尖诱导氧化过程可被认为是电化学阳极氧化过程。
The effects of anodic oxidation process on thickness, corrosion resistance and surface morphology of hard oxidation film were studied.
为了研究阳极氧化工艺条件对硬质氧化膜的厚度、耐蚀性、表面形貌的影响。
The paper introduces the theory of the hard anodic oxidation and the technological process of the hard anodic oxidation of the rotor and the process equipment.
简单介绍了硬质阳极氧化的工艺原理及转杯硬质阳极氧化的工艺流程和工艺装备。
Anodic alumina oxide (AAO) membrane prepared by anodizing of al not only has a simple process, but also contains uniform parallel pores and high pore density.
阳极氧化铝膜不仅制备工艺简单，而且具有孔径分布均匀、孔密度高、孔道平行可根据实际需要调控孔径大小及分布。
The key of the manufacturing process of anodic oxide film of aluminium wire is the continuous anodic oxidation.
氧化铅丝生产过程中最关键的工艺是连续阳极氧化。
The history of anodic oxidization on magnesium and its alloys was simply reviewed, and its treating process, compositions and functions of electrolyte were introduced comprehensively.
回顾镁合金阳极氧化历史，介绍制备工艺、电解液组成及作用，同时对镁合金阳极氧化机理进行探讨。
Anodic phosphor bronze is commercially produced by upward casting process with the technology introduced.
介绍上引法生产阳极磷铜的新工艺，重点介绍上引法生产阳极磷铜熔炼、铸造工艺。
The coloring process can be formed a complete set with anodic electrophoretic coating technology for aluminium.
该着色工艺可和阳极电泳工艺配套。
The sketch map of change on microstructure of anodic oxidation film during the reaming process and the process parameters for obtaining the multi-coloring by blocking layer adjusting were presented.
给出了扩孔处理过程中阳极氧化膜横断面的显微结构变化示意图，并给出了“阻挡层调整”实现多色化的工艺参数。
Abstracts: the article describes the rendering technology and its development trend from the anodic oxide film of aluminum alloy electrolytic coloring process and additives used.
摘要：本文从铝合金阳极氧化膜电解着色工艺与添加剂使用的角度，对着色工艺及其发展趋势进行简单的阐述。
A tunneling accelerometer is fabricated and characterized based on the extension of the silicon-glass anodic-bonding and deep etching releasing process provided by Peking University.
提出了一种基于北京大学硅玻璃键合深刻蚀释放工艺的扩展工艺，用来加工微型隧道加速度计。
Based on the analysis of reaction mechanism in aluminum anodizing process, the dynamics simulation of Turing pattern formation mechanism in anodic aluminum oxide is investigated in the thesis.
本文在分析铝阳极氧化过程的反应机理的基础下，对其图灵斑图生长机制进行了动力学模拟的研究。
However, at more anodic potentials another dissolution process was observed producing noticeable changes on the surface morphology which could be ascribed to the dissolution of a au-sn surface alloy.
然而，在另一个阳极电位更正的阳极溶解过程中，观察到在表面形貌上产生明显变化的原因是金锡合金的溶解。
The paper introduces the theory of the hard anodic oxidation and the technological process of the hard anodic oxidation of the rotor...
简单介绍了硬质阳极氧化的工艺原理及转杯硬质阳极氧化的工艺流程和工艺装备。
The potentiostat is one of the principal instruments used to control an anodic dissolution process accurately in electrochemical experiments.
恒电位仪是在合金相电解提取中精确控制阳极溶解过租的重要仪器。
The electrochemical oscillations often are observed in the process of anodic electrodissolution of metal and alloy, in particular, in the transitional period of between activation and passivation.
金属和合金阳极电溶解过程中常常可以观察到电化学振荡现象，尤其是在活化与钝化的转变阶段。
Anodic bonding is a new way to realize the bonding between solid electrolyte glasses (ceramics) and metals through the interaction process of electricity and heat.
阳极键合是一种利用电和热相互作用实现固体电解质玻璃(陶瓷)与金属材料固态连接的一种新方法。
Material of machine frame: The surface extrusion process by anodic aluminum oxide, carbon steel spraying plastic, spray-painted carbon steel, stainless steel.
机体框架材质：表面经阳极氧化铝挤型材、碳钢喷塑、碳钢喷漆、不锈钢。
Material of machine frame: The surface extrusion process by anodic aluminum oxide, carbon steel spraying plastic, spray-painted carbon steel, stainless steel.
机体框架材质：表面经阳极氧化铝挤型材、碳钢喷塑、碳钢喷漆、不锈钢。
应用推荐