Universal set of technology, make precision machine tool spindle use Angle contact ball bearing realized either way matching use.
万能组配技术，使精密机床主轴用角接触球轴承实现了任意方式的配对使用。
Four pionts Angle contact ball bearing is separable bearing, it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
As the core parts for high speed spindle, the dynamic properties of Angle contact ball bearing has important effect on cutting performance and machining precision of whole machine.
角接触球轴承作为高速主轴的核心部件，其动力学特性对整机的切削性能和加工精度有重要的影响。
Taper roller bearings of the series 313 are particularly adequate due to their comparatively large contact Angle (approximate 30 deg), when high axial forces are to be considered.
圆锥滚子轴承系列313，特别是足够的，由于其相对较大的接触角(约30摄氏度)，高轴向力时要考虑的。
These bearings have a larger contact angle and no filling slots.
这些轴承有更大的接触角和无填充槽。
If the conveyor tilt Angle is too large, please use GX series screw conveyor, or directly contact with the company's technical department for a separate design.
如果输送倾斜角度过大请选用GX系列螺旋输送机，或直接与我公司技术部门联系进行单独设计。
Larger contact Angle type has better axial load capability.
更大的接触角型具有较好的轴向负荷能力。
To avoid sliding that occurs in cylindrical roller thrust bearings, the taper Angle of the rollers is selected so the extended contact lines intersect on the bearing axis.
为了避免推力圆柱滚子轴承发生滑动，滚子的锥度要合适以至于扩大的接触线可以与轴承轴相交。
As a result, the contact Angle of CFs with respect to epoxy resin was found to be remarkably decreased.
结果表明，经过氧化和氨化方法处理后碳纤维与环氧树脂的接触角降低。
Design a variety of radial clearance and the contact Angle, to meet different application requirements of load and deflection.
设计有多种径向游隙和接触角，满足不同的应用负荷和偏斜要求。
The raceways of both the inner and outer rings of this bearing type are made with a set contact Angle.
双方的这种类型的轴承内圈和外圈的滚道是由一组与接触角。
The higher the surface energy of the solid substrate in relation to the surface tension of the liquid, the better its wettability, and the smaller the contact Angle.
较高的表面能量的固体基质有关的表面张力的液体，它的更好的润湿性，较小的接触角。
The sessile drop technique is used to measure the contact Angle between molten aluminum and graphite or copper coated graphite.
采用改进的座滴法分别测定了铝熔体与石墨、镀铜石墨的接触角。
Disc has a differential Angle front the seat to provide a line contact for maximum sealing.
这类阀瓣具有不同的角度面对阀座，因此具有线接触作用，从而实现最大限度的密封。
FAG single row angular contact ball bearings of series 72b and 73b have a contact Angle of 40. They can therefore accomodate high axial loads.
FAG单列角接触球轴承72b和73 B系列有一个40度的接触角，因此它们能够提供较高的径向载荷。
The article analyzes the importance of effective fi-nance regulatory to long -term economic growth from the Angle of Inherent contact between finance regulatory and economic growth.
本文从金融监管与经济增长内在联系的角度分析了有效金融监管对于长期经济增长的重要意义。
The contact Angle is the Angle between the tangent line at the contact point and the horizontal line of the solid surface.
接触角是角之间的切线的联络点和水平线的固体表面。
The article has accounted what Sodium Carboxy Methylcelluos effect to washing action by Samples' experimental datas of surface tension and contact Angle.
本文利用各种样品的表面张力和接触角的实验数据，说明羧甲基纤维素钠对洗涤作用的影响。
Grinding coal sample result is better than the forming fine coal during contact Angle measurement.
指出在接触角测量过程中，研磨煤样要比成型粉煤测量效果好。
An alternate experimental approach which does not require the direct measurement of contact Angle appears to be promising.
有一种可选用的试验方法看来很有希望，它不要求直接测量接触角。
The property changes of foam rubber surface before and after the treatment were studied by XPS and contact Angle measurement.
通过X射线光电子能谱分析和接触角测定，研究了处理前后泡沫橡胶表面性质的变化。
The dynamics contact Angle of some polymer materials is studied.
详细研究了有关高分子材料的动态接触角。
Based on the measurement of the contact Angle of differently treated ITO, the surface energy and polarity were calculated using the harmonic mean method.
在测量ito接触角的基础上，应用调和平均法计算了不同表面处理ITO阳极的表面能和极性度。
Due to their contact Angle, single-row angular contact ball bearings are better suited to sustaining high axial loads than deep-groove ball bearings.
由于其接触角，单列角接触球轴承比深沟球轴承更适合维持高轴向负荷。
The relationship between the morphology and the dynamic contact Angle of polypropylene fibers treated by plasma was found out through comparative analysis.
通过比较分析得出了等离子体处理后丙纶纤维的表面形态和表面接触角的关系。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The contact Angle has the important effects on CHF.
接触角对临界热流密度有重要的影响。
The simulation results indicated that heat transfer coefficient increased with increasing surface free energy difference and decreasing contact Angle hysteresis.
模型计算结果表明液固表面自由能差越大、接触角滞后越小则越有利于冷凝传热。
The simulation results indicated that heat transfer coefficient increased with increasing surface free energy difference and decreasing contact Angle hysteresis.
模型计算结果表明液固表面自由能差越大、接触角滞后越小则越有利于冷凝传热。
应用推荐