A brouter is a network bridge combined with a router.
网桥路由机是网桥和路由器的结合。
A proxy mode service can act as a router for several target services.
一个代理模式服务可以作为几个目标服务的路由器。
The box isn't a router or a DHCP server or anything, it's just a bridge.
这个机器不是路由器，也不是DHCP服务器或者任何别的东西，它只是一个网桥。
Some defined set of criteria determines where a router sends the message.
某些既定的标准决定路由器将把信息发送到哪里。
The response is generated by a router as part of the mail delivery of the incoming message.
该响应由路由器生成，作为输入消息的邮件传递的一部分。
You need a router, and I'll explain why.
你需要一个路由器，我将解释为什么。
Device that functions as both a router and bridge.
具有网桥和路由器两者功能的设备。
The entire encrypted payload can traverse a router-based IP network as is.
整个加密的有效负载可以照原样通过基于路由器的ip网络。
In such a network, each mobile node operates not only as a host but also as a router.
它无需固定的基站与基干网，网络中每个节点既充当主机又充当路由器。
An edge router is a router that interfaces with an asynchronous transfer mode (ATM) network.
边缘路由器是与异步传输(atm)网络相连接的路由器。
For example, ICMP will send a source quench message when traffic becomes congested at a router.
例如，当某一路由器发生通信拥塞时，ICMP会发出一个源抑制信息。
Suppose that some network issue emerges-a router close to the devices fails or a cluster of devices fails.
假定出现了某个网络问题，例如，靠近设备的路由器出错，或一组设备出错。
If a route is not found, the packet is sent to the source host's default gateway, also called a router.
如果找不到路径，数据包就被送往发送端主机的默认网关，有时也称为路由器。
This is typically caused by a router forwarding a packet using an interface that is outside the scope of the source address.
这通常是由于路由器使用了源地址范围以外的接口转发数据包所导致的。
If a router receives a packet that is too large for the underlying network, IP will break the packet into manageable chunks.
如果某路由器收到一个对它下面的网络而言过大的数据包，IP协议会把数据包分割成可操作的小块数据。
Another example is using Message Broker as a router to help integrate two systems without making any changes to their existing interfaces.
另一个使用MessageBroker的例子是将它作为一个路由器来集成两个系统，同时不需要对其现有接口进行任何更改。
Many people go online via a router and typically only the computer directly connected to the device can interrogate it for ID information.
很多人通过路由器上网，而只有直接和路由器相连的电脑才可以向路由器询问它的身份识别信息。
If you already have a Legacy Powerline device connected to a router, this lone plug will not connect to additional higher speed adapters.
如果你已经有一台连接到路由器的传统电力线设备，这一个插头不能连接其他速度更高的适配器。
NOTE: Never tighten the collet without first installing a router bit in it. Tightening an empty collet, even by hand, can damage the collet.
说明：决不可无刀头状态拧紧夹头。无刀头时，即便用手拧紧夹头，也可能导致其损坏。
You can use this to limit requests on certain interfaces if you are using the server as a router where you only want certain interfaces to support DNS.
如果将该服务器用作路由器，其中您只希望某些接口支持 DNS，则可以使用此选项将请求限制到某些接口上。
If a router can then be configured to forward client requests to the members of each cluster, then you have effectively addressed the cluster size limitation issue.
如果路由器可被配置为将客户机请求转发给每个集群中的成员，那么就可以有效地解决集群大小受限的问题。
You can use this kind of component for expressing the kinds of relationships you find in an organization chart, a router-link topology, and similar kinds of applications.
您可以使用这种类型的组件表示组织树图关系、路由链接拓扑和类似的应用程序。
The certain topology which interconnected by switching modules, input and output modules, and internal protocol constitutes the internal switching network in a router.
多个交换单元以及输入输出端口模块以一定的拓扑结构和内部协议连接就构成了路由器内部的交换网。
As soon as there is something like a router between client and server, ARP will only reveal the MAC address of the router since this is the target for your Ethernet packets.
只要有一个客户端和服务器之间的路由器，ARP只会显示路由器的MAC地址，因为这是你的以太网包的目标。
All the network cameras I tested are designed to work with a home or small office Ethernet network and work best with a router device and a high-speed broadband Internet connection.
所有我尝试的这些网络摄像机都是专门为家庭或小型办公室以太网环境设计的，而且与路由器设备和高速宽带互联网接入配合使用效果最佳。
In the process of connecting to other networks, the host may need to access a router, a device that determines the best connection path between networks and helps networks to make connections.
在与其他网络进行连接的过程中，主机可能需要访问路由器，一个用以确定网络间最佳连接路径并帮助网络建立连接的设备。
The drawback to this solution is that, since the raw data is within the SOAP message, it must be scanned by any XML parser, even if it is never used (for example, in an intermediary, like a router).
使用这种方法的缺点就是，因为原始数据放在了SOAP消息中，为此xml解析器必须扫描这些数据，即使它从来不会被使用到(例如，在一个SOAP处理中间体，类似于一个路由器)。
The drawback to this solution is that, since the raw data is within the SOAP message, it must be scanned by any XML parser, even if it is never used (for example, in an intermediary, like a router).
使用这种方法的缺点就是，因为原始数据放在了SOAP消息中，为此xml解析器必须扫描这些数据，即使它从来不会被使用到(例如，在一个SOAP处理中间体，类似于一个路由器)。
应用推荐