影响齿轮传动噪声的因素很多。
齿轮传动噪声是齿轮设计必须考虑的重要问题。
The noise in gear transmission should be considered when gear designing, and mechanism of producing noise were described.
齿轮的齿形误差是影响齿轮传动噪声的主要因素。
The profile error of gears is the main factor of gear transmission noise.
分析了齿轮噪声产生的主要原因及降低齿轮传动噪声的方法。
This paper analyses the main cause of gear noise and the way of reducing it.
关于齿轮传动型式设计对噪声的影响，长期来的一般概念是升速齿轮传动噪声大。
For influence of design of gearing form on the noise, the general concept that more noise on the increasing speed gear appears has been known for long.
论文同时建立了齿轮传动通用动力学模型，分析了齿轮传动系统中齿轮和轴承等主要零部件的振动和噪声机理。
The paper also sets up the general dynamic model for gear transmission, analyses the vibration and noise principle of the main parts in the gear transmission system like gear and bearing.
齿轮传动所引起的振动和噪声是机械传动振动和噪声重要来源之一。
The vibration and noise brought out in mechanical system comes primarily from that produced by gears.
导出了轮齿振动方程序中各参数的表达式。初步完成了传动系齿轮部分的噪声预估及CAD的理论研究工作。
And derived the expressions of parameters in teeth vibration equation, which completed essentially the theory of noise prediction and CAD on gears of transmission systems.
本文介绍了硬齿面点线啮合齿轮传动的承载能力试验和噪声测定试验的情况。
In this article the bearing ability test of hard gear face point-line meshing gear transmission and the trial of noise test are introduced.
电钻传动齿轮噪声超标，意味着产品存在质量问题和安全隐患。
Excessive noise from transmission gear of electric drills means that the product still owns unclear problems in quality and security.
齿轮的啮合振动和噪声是现代齿轮传动这一领域中的主要课题之一。
The meshing vibration and noise of a pair of gears is one of the major subjects in the field of modern gear drive.
通过对阻尼材料的力学特性的分析，探讨了阻尼环对齿轮传动振动噪声的影响。
In this paper the influence of the damped ring on the gear transmissions vibration and noise was studied by analyzing the mechanics characteristic of the damped material.
在此基础上，本文给出了双圆弧齿轮传动的小振动、低噪声设计准则。
On this basis, a design criterion of small vibration and low noise for the dual circular-arc gears is given out in this paper.
船用大功率齿轮传动的突出特点是高速、重载和低噪声。
The outstanding features of a marine high-capacity gear transmission device are high speed, heavy load and low noise.
作为摩托车初级传动的曲轴齿轮及初级从动齿轮，由于转速高及降速比大，是产生噪声的主要因素。
The primary drive gear(crankshaft gear)and the primary driven gear are the source of noise due to their high speed and bigger reduction ratio.
本文对齿轮结构上外加阻尼层方面进行了改善低噪声性能的实验研究，为齿轮传动低噪声性能提供了可行的改善措施。
This paper describes the research being made on outer damping structure method to promote low-noise performance, and presents adoptable improving method for reducing the gear-transmission noise.
双圆弧齿轮齿端修形是减小啮入冲击、降低传动噪声、避免齿端崩角、提高使用寿命的有效措施。
The tooth end relief is an effective process for double circular arc gear to lighten the shock, lower the meshing noise, and prevent the tooth end from breakage, so as to prolong the service life.
应用奥贝球铁(adi)代替合金钢制造传动齿轮并进行齿形修正，显著降低噪声水平。
The gears of austempered ductile iron (ADI) and the gear profile modification technique can effectively reduce transmitting gear's noise.
对齿轮传动过程中产生噪声的各种因素分别从设计、制造、安装、使用维护各方面作了分析，并分别提出了相应的对策。
Various factors causing noise in gear transmission are analyzed in view of design, manufacturing, installation, utilization and maintenance, and corresponding countermeasures are presented.
本文主要从机床的齿轮传动、轴承的选用和齿轮箱的结构等方面对机床噪声产生的影响以及提出相应的降噪措施进行了探讨。
The paper analyzes the gear driving, the choice of bearing and the construction of gear-boxes, which affect the making of noises, and proposes measures of decreasing noises.
采用该方法对弧齿锥齿轮进行装配和调试，降低了噪声，减小了震动，保证了传动精度。
Using this method in spiral bevel gears' setting, the noise could be reduced, the vibration be decreased and the precision of transmission be ensured.
采用托瓶提升气 缸，油尼龙齿轮传动，噪声小，整机运转平稳。
Bottle with care to enhance the cylinder, oil nylon gear drive, low noise, smooth running machine.
在某些重要的应用场合，行星齿轮传动的振动和噪声是影响系统的可靠性、寿命与操作环境的关键因素。
In some cases vibration and noise of PGT will have a great influence on reliability and life-span of the system.
为了降低某水下航行装置的辐射噪声，增强其探测目标的能力，对该装置的重要噪声源——传动齿轮箱进行了减振降噪的试验研究。
An investigation was made on the main noise source-the gearbox of the underwater vehicle to reduce the noise and improve its capability of goal-detecting under the water.
分析数控机床齿轮传动系统产生噪声的原因，并提出改善措施。
Analyzing the reasons of noise of gear drive system in NC machine tools and proposing the measures taken to improve it.
螺旋锥齿轮啮合时产生的附加动载荷是螺旋锥齿轮传动产生振动、噪声的主要原因。
Additional dynamic load during Spiral bevel gear meshing is main cause of vibration and noise. Based on national standard.
齿轮传动的缺点运转中振动、冲击和噪声，并产生动载荷。
Gear defects Operating vibration, shock and noise, and generate dynamic load.
齿轮动力学分析是利用振动力学理论，研究齿轮系统在传递动力和运动过程中振动、冲击、噪声的基本规律，对齿轮传动的降噪、降振非常重要。
The gear dynamics analysis is, according to the theory of vibrate dynamics, to study the basic rule of vibration, shock and noise which created by gear system while transferring power and motion.
传动机构采用优质齿轮及链轮传动，保证精密度及低噪声。
High quality gears and chains used at the transmission instruction to achieve accuracy and low operation sound.
弧齿锥齿轮和准双曲面齿轮(以下简称锥齿轮)广泛用于车辆传动中，锥齿轮的传动噪声以及平稳性是影响整车性能的重要因素。
Spiral bevel and hypoid gears have been widely used in the transmission system of automobile as one of the key parts.
应用推荐