在对磁流体单级密封齿形研究基础上，提出了一种新型多级密封齿形结构。
On the basis of research on the tooth -shape of single stage seal, a new type tooth - shape of multistage seal is suggested.
阐述了热磨机磨片的主要功能，并对影响磨片齿形结构设计的三个主要因素进行了分析。
The main functions of refiner plates are stated, and the analysis of the three primary factors that influence the structural design of refiner plate-bar is made.
该无缝拼接网石片由卵石与网络式纤维布胶粘成，呈矩形片状结构，其特征在于所述网片石的四周边为齿形结构。
The seamless stitching net flakes from gravel and network-fiber cloth into Stickies, a rectangular sheet structure, its features is described in the four-mesh surrounding the tooth structure.
通过规则齿形结构面在双轴应力条件下的蠕变试验，对规则齿形结构面剪切蠕变特性进行了深入的研究，分析了规则齿形结构面蠕变的基本规律。
Testing study is made on the creep characteristic of regularly dentate discontinuity in the condition of two-axial stresses, and the normal creep rule of regularly dentate discontinuity is analyzed.
介绍了机动玩具中不完全齿轮机构在齿形、结构、材料应用和加工工艺方面的设计特点。
Design characteristics of intermittent gear mechanisms of action toys are introduced in tooth form, structure, material applying and manufacturing technology.
以带长、带宽、中心距作为目标函数，对齿形带结构参数的优化设计进行了探讨。
The optimum design of synchronous belts with structure parameters is explored in this paper, taking the belt length, width and centre distance as objective functions.
分动器采用全铝壳体、无声齿形链式传动，使总成结构紧凑，实现产品轻量化、低噪声。
Thansfer adopts the whole aluminum case and the silent chain for the assembly structure more compact as well as realizes the light, low noise.
介绍了硬齿面滚刀倒棱的齿形计算公式和误差分析，探讨了新型的倒棱滚刀结构方式及制造工艺。
Profile formula for hard gear chamfered edge hob and its error analysis are introduced. A new kind of chamfered edge hob structure and manufacturing engineering are investigated.
牙齿形态发生包括一系列决定器官发育启始和结构调控的过程。
Tooth morphogenesis is a series of process including the initiation of organogenesis and the regulation of structures.
总结了滚子齿形凸轮的特点及其在自动换刀单元（ATC）中滚子齿形凸轮的结构形式。
Summarize the characteristics of roller-gear-cam and structure in ATC. Introduce the tool change process of automatic tool change, draw the motion circle graph.
分析了某钢筋混凝土锯齿形排架结构设计中柱子截面取值偏小导致结构不满足承载力及变形要求的原因。
Column sections of a reinforced concrete zigzag bent frame structure are designed inadequate so that the bearing capacity and deformation can not be satisfied. The reason is analysed.
本文就作者制作的简化模型，分析研究了其基本原理、结构方案、运动关系、齿形和啮合特点。
This paper, making use of the simplified model made by the author, analyzes its basic principle, construction schemes, movement relationship, tooth form and meshing features.
提出新型切边模结构和刃口齿形设计计算公式，论述模具制造工艺、模块翻新和模具系列化方案。
A new type of structure of the trimming dies and the formulae for designing the cutting edge of the dies are put forward, the manufacture process and the seriation of the dies are discussed.
通过改变刷毛直径、刷毛密度、刷毛与轴的间隙以及刷毛齿形，分析了这些结构参数对密封性能的影响规律。
By changing the brush diameter, density, the gap between brush bristles and the axis, and the shape of brush edge, the influence of the structure parameters on the seal performance is obtained.
在结构上采用了三翼四齿的钻头体、弧槽形排粉沟槽，适用于硬、中硬、软岩的三种齿形。
The drill bit body has three wings four cylindrical tungsten carbide inserts and curved slots for removal of cuttings.
介绍了利用南向天窗、排雾塔、锯齿形厂房结构、回流式冷凝器及复合式排雾装置的排雾原理和方法，并提出了今后的研究方向。
The principles and practices for mist-removal are presented by southern-facing skylights, zigzag roof configuration, mist-exhaust tower, flux condensers and combined mist removal system.
模具设计的关键是结构设计和参数处理，文章针对渐开线花键冲齿模齿形参数设计提出一些快速、实用的方法和经验。
The keys of die designing are the structure designing and data handling. This article give some quick and practical methods and experience of gear shape data of involute spline gear blanking die.
老式木结构的商铺、传统的锯齿形挑檐很快就被水泥店面、金属卷帘门所取代。
The old style. wooden shop fronts and traditional style. crenellated tile roofs were quickly being replaced by concrete shop houses with metal shutters and doors.
分析了某钢筋混凝土锯齿形排架结构设计中柱子截面取值偏小导致结构不满足承载力及变形要求的原因。
Column sections of a reinforced concrete zigzag bent frame structure are designed inadequate so that the bearing capacity and deformation can not be satisfied.
提出内齿轮热精锻成形的新型模具，论述了模具结构和模具齿形设计加工方法。
A new_type die for hot fine forging internal gears was put forward. The structure principle of the die and the method for designing and machining the tooth profile of the die were discussed.
在本次设计中要进行齿数计算、齿形分析、效率计算、强度验算、结构设计、绘制减速器装配图及零件图。
To calculate the number of teeth in the design, profile analysis, efficiency calculation and checking the strength, structural design, drawing reducer assembly drawings and part drawings.
考虑结构面各向异性剪胀的楔形体稳定分析方法以三维锯齿形模型描述结构面表面形态。
This method adopts a 3D saw-tooth-like model to characterize the anisotropic dilatancy of discontinuity.
考虑结构面各向异性剪胀的楔形体稳定分析方法以三维锯齿形模型描述结构面表面形态。
This method adopts a 3D saw-tooth-like model to characterize the anisotropic dilatancy of discontinuity.
应用推荐