这种新型靶弹的研制预计将在2014年完成。
在此基础上，分析了采取三种措施来消除风矢量对靶弹航向偏差的影响。
The influence of wind vector on course deviation of target missile is analyzed.
引入方位系数和径向综合系数，推导出了有脱靶弹的立靶密集度估计公式。
Introducing azimuth and radial integrated coefficients, estimation formula of vertical target density with miss projectile is derived.
自动火炮立靶密集度试验对脱靶弹的处理尚未形成较为一致的共识和处理方法。
In vertical target density test, processing for miss projectile does not form consistent common understanding and treatment method.
该计算方法可以为少量脱靶弹存在时自动火炮立靶密集度估计问题提供理论与工程实践的参考。
This calculation method can provide theoretical and engineering practice reference for vertical target density estimation of automatic gun with a few miss projectiles.
根据动能弹对装甲目标作用的毁伤破坏机理，提出了这一特定弹靶系统中装甲目标等效靶的建立方法。
Based on the damage mechanism of armor targets impacted by kinetic energy projectiles, the method of selecting surrogates for this typical ammunition-target system was advanced.
靶试结果表明，该系统设计合理，为战斗弹的靶试提供了重要的参数。
Test result explains that design of telemetry system is reasonable and have provided important parameters of combat missile.
该文通过对带铝套管的分段弹侵彻半无限钢靶的研究分析，以流体动力学和侵彻力学为基础，提出了一个分段弹垂直侵彻半无限厚靶的简化模型。
In study of the penetration of a segmented rod with aluminum carrier tube into semi infinite steel target, we present a simplified model of based on hydrodynamics and penetrating mechanics.
利用火炮发射动能弹，对钢筋混凝土靶进行正侵彻和斜侵彻试验。
We conduced penetration experiments into reinforced concrete targets with ogive-nose kinetic energy projectiles.
为了解决短靶室轻气炮实验中的弹托分离问题，设计了新型弹托结构和弹托气动分离装置。
To solve the problem of sabot separation in experiments using light gas gun with short target chamber, a new type of sabot and its separation device were designed.
通过输入弹、靶普通参数及碰撞的基本条件，计算程序即可给出各基本参量间的关系曲线。
Further, programs can draw some curves after receiving some essential factors of impacting and common parameters of rod and target.
利用长杆侵彻弹对几种含密排刚玉球层的钢纤维混凝土靶体进行了抗侵彻试验研究。
The anti-penetration characteristics of several kinds of steel fiber reinforced concrete (SFRC) with tightly arrayed corundum spheres to long rod projectile have been experimentally studied.
模型及弹托设计是开展弹道靶试验研究的基础。
Equally important to the ballistic range tests is the design of model and sabot.
介绍了截卵形弹头钻地弹对混凝土靶的侵彻试验研究结果。
The paper discusses experimental results of launching truncated-ogive-nose earth penetrating weapon into concrete targets.
数值模拟结果表明，模拟弹与原型弹的成型符合相似律，其对钢靶的侵彻深度也满足模拟比。
The numerical results indicate that, the shaping of the prototype and the simulation EFP accord with the analogue rule, and the depth of penetration on steel target also satisfy simulation ratio.
该文应用弹丸侵彻混凝土靶理论，对弹丸侵彻混凝土时所受阻力进行分析，得到影响弹丸侵彻阻力的因素，并对助推钻地弹的侵彻运动过程进行研究。
The theory of penetrating concrete targets was applied to investigate the resistance of EPW. The factors having effects on penetration resistance were obtained. The boosting process was also analyzed.
计算关系式中，包含了连续变化的射流速度和直径，飞板速度和厚度，主装甲钢的强度等主要弹靶因素。
Formulas for calculation involve the important factors such as the varying diameters and velocities of the jet, velocities and thicknesses of the flying plates, as well as the strength of main armor.
用统计擦碎模型对中能区不同弹靶体系在弹核碎裂反应中的同位旋效应和同位旋标度率现象进行了系统研究。
The isospin effect and isoscaling behaviors in projectile fragmentation reactions have been systematically investigated by a modified statistical abrasion-ablation(SAA)model.
使用基准破甲弹对等厚不同强度钢的靶板进行静破甲，得到形状相似的弹坑。
Used the norm penetration case, the quietly penetration has been done to the steel target plank which is equal thickness but different intensity, and the similar form craters ware be obtained.
文章介绍了一种增效射孔弹模拟靶试验装置。
An installation for the simulated test of perforating shaped charge with after effect was described.
针对动能杆式弹大倾角斜撞击靶板产生的靶后破片，建立了其初始破片云数学描述模型，并在此基础上对斜撞击靶后破片特征分布进行了建模。
For the description of the debris behind oblique single plate target perforated by kinetic projectile, an initial armor debris cloud model has been proposed.
该文讨论了对特定弹靶系统毁伤作用的等效问题。
The damage assessment equivalence of special ammunition-target systems was discussed.
论述了采用某导弹战斗弹遥测系统中的“视频遥测”信号推算导弹靶试时脱靶量的原理，介绍了两种处理脱靶量的方法。
Describes the principle of miss distance assessing by using video TLM in one missile's video pack telemetry system, and introduces two methods of miss distance assessing.
详细研究了靶板的破坏模式、特点及尖头弹和钝头弹在侵彻机理上的差异，并提出了建立模型的具体步骤。
The destroyed modes and characteristic of targets, and the differences of penetration mechanism between cuspidal and blunt projectiles are studied. Idiographic steps of building models are suggested;
介绍了截卵形弹头钻地弹对混凝土靶的侵彻试验研究结果。
The theory of penetrating concrete targets was applied to investigate the resistance of EPW.
介绍了截卵形弹头钻地弹对混凝土靶的侵彻试验研究结果。
The theory of penetrating concrete targets was applied to investigate the resistance of EPW.
应用推荐