加入适量阻聚剂可以延长其保存期。
最后展望了裂解碳五馏分阻聚剂今后的研究方向。
Finally, the future development of inhibitors for cracking C5 fractions is prospected.
探索了催化剂、阻聚剂和反应温度对水解反应的影响。
The effect of the catalyst, inhibitor and temperature on the hydrolysis was also investigated.
碳三阻聚剂的注入是保证乙烯装置长周期运行的关键因素之一。
Injection of C_3 polymerization inhibitor is one of the critical factors which guarantee the long-term operation of ethylene plant.
在不同阻聚剂用量、投料比、投料方式等条件下合成环氧丙烯酸酯。
The epoxy acrylate was synthesized with different amounts of inhibitor, feed ratios and feeding modes.
请求英语高手翻译一下添加相转移催化剂PEG-400和阻聚剂对叔…
Add a phase transfer catalyst PEG-400 and the inhibitor ofp-tert-butyl-catechol synthesis of cinnamic acid on the yield …
文中从结垢的机理出发，提出了优化碳三阻聚剂注入的方法并予以实施，取得了一定的效果。
In this article, methods for optimizing the injection of C_3 polymerization inhibitor are presented based on the mechanism of fouling, and a cer - tain effect is achieved upon implementation.
探讨了丙烯酸与十四醇摩尔比，催化剂和阻聚剂的用量、反应温度及反应时间对酯化反应的影响。
The influence of acrylic acid and tetradecyl alcohol, amount of catalyst and inhibitor, reaction temperature, reaction time were investigated.
由于采用的催化剂和阻聚剂独具特点，异于常规，使得TMPTA 收率达到98%且色泽清透。
As the catalyst and inhibitor were particular, the yield of TMPTA in high transparency reached 98%.
结果表明，阻聚剂ZC的使用性能达到了进口阻聚剂水平，完全可以替代进口产品应用在工业装置中。
The result showed that inhibitor ZC can achieve the level of import product, and can substitute it in industrial equipment.
实验结果证明，除阻聚剂外，其它各物质均可与催化剂产生协同作用，不同程度地提高了稠油的降粘率。
The experiments results shows that any mass, except polymerization inhibitor, has synergetic effect with catalyst and enhanced viscosity reduction rate of extra-heavy oil.
介绍了耐水型光聚合丝印感光胶的制备方法，讨论了成膜剂、活性单体、阻聚剂等对感光胶感光成像性能的影响。
This article reports the preparation process of the photopolymer emulsion, and the effects of the monomer, film former and inhibitor on the photosensitivity and image forming property of the emulsion.
介绍了加成型有机硅浸渍漆的基本组成、催化剂、阻聚剂及其固化机理，并综述了国内外加成型液体有机硅浸渍漆的应用情况。
The paper introduces the basic components of an additive liquid silicone impregnating varnish, the catalyst, the inhibitor and its curing mechanism.
实验结果表明，复合阻聚剂SPJ701 -HQ阻聚效果较好，聚合反应的诱导期长，说明氮氧自由基与HQ有协同效应。
The result shows that the complex inhibitor of SPJ701 and HQ which has long polymerization reaction induction period, is better than HQ on inhibition efficiency.
本法一次进样可同时测定丙烯酸中各组分和阻聚剂，大大节省了检测时间，为工业生产丙烯酸提供了一种快速、有效的测定方法。
The inhibitor and components of crylic acid can be determined simultaneously by one injection, which provides a rapid and efficient method for the determination of industrial crylic acid.
考察了过氧化物、胺和阻聚剂含量对实验性化学固化树脂双键转化度、显微硬度、压缩强度、径向抗张强度、弯曲强度和固化时间的影响。
In this study, the effects of various contents of peroxide, amine, and inhibitor on polymerization degrees, mechanical performances, and curing time of dental resins were investigated.
合成了一种磷酸酯改性的含氯丙烯酸酯低聚物，讨论了合成过程控制、阻聚剂使用、丙烯酸酯单体的选择等因素对合成工艺及性能的影响。
The title oligomer has been prepared. Influence of control of preparation process, inhibitors, selection of acrylic monomers on preparation technology and product properties are discussed.
然后，结合丙烯酸树脂的光固化特点，从光源、活性稀释剂、引发剂体系等多方面考虑，主要是改进引发剂体系，找到了合适的抑制表面氧阻聚的方法。
Then, considering many respect such as light source, diluent and photoinitiator, mainly improving photoinitiating system, we found the solutions to oxygen inhibition of acrylic resin in uv-curing.
该组合物可以进一步包含未用过的聚对苯二甲酸乙二醇酯(PET)、高阻气剂或氧清除化合物。
The composition can further comprise a virgin polyethylene terephthalate (PET), a high gas barrier or an oxygen scavenging compound.
设计制备大空间位阻的活性聚硅氧烷阻尼剂是提高航空硅橡胶阻尼性能的主要途径。
The damping property of silicone rubber can be improved by designing and synthesizing of high-molecular polysiloxane damping agent.
设计制备大空间位阻的活性聚硅氧烷阻尼剂是提高航空硅橡胶阻尼性能的主要途径。
The damping property of silicone rubber can be improved by designing and synthesizing of high-molecular polysiloxane damping agent.
应用推荐