介绍了银-锑合金镀层和镀液中锑含量的分析方法。
This paper introduces the analysis method of silver-antimony alloy coating and antimony content.
分析了氰化镀铜锡合金过程中镀层出现毛刺弊病的原因，并提出了解决方法。
The case of burrs defective in cyanide tin - copper alloy deposits were investigated and preventive methods were proposed.
本文采用置换反应方法除去废铜线表面的锡镀层，对回收锡的工艺进行了探索。
In this paper, the separation of tin cladding from tinned copper wires and its recovery are investigated.
铝材灯饰零件对镀层光亮度和结合力有着比较高的要求，采用电镀加工方法废品率高。
The excellent brightness and cohesion of the plating layer are needed for aluminium lamp finishing parts.
引线框架电镀层的质量直接影响着钽电容器的可焊性，所以引线框架电镀层质量的测定方法至关重要。
The Quality of lead frame plating layer directly affects the solderability of tantalum capacitor, so its measuring methods are very important.
简要介绍了Ni-P镀层的退除方法和研究概况以及典型的除镍剂配方的比较。
Methods of removal of NI-P plating layers and typical formulations of Ni removers here briefly presented.
主要研究了电涡流传感器在多频率多参数下镀层厚度的测量方法。
This paper mainly studies the measuring method for the thickness of plating layer ofthe eddy-current sensor in the case of the multi-frequency and multi-parameters.
论述了功能梯度镀层的概念、性能、应用及制备方法。
Concept, performances, applications and preparation methods of functionally gradient material are stated.
金属和其他有机镀层。锌，镉，铝-锌合金和锌-铝合金的铬酸盐转化镀层。试验方法。
Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods.
采用硫酸镍、钨酸钠和柠檬酸三钠为基本组分的镀液，通过电镀的方法在紫铜试片上沉积得到了镍钨合金镀层。
Nickeltungsten alloy coating was deposited on copper plate making use of electroplating in the bath composed of nickel sulfate, sodium tungstate, and trisodium citrate.
采用电沉积或化学镀可以获得复合镀层，复合电镀也是制备复合材料的一种重要方法。
Composite coatings can be achieved by electrodeposition or electroless plating. Composite electroplating are also an important method for acquiring composite materials.
针对光滑极限量规传统的制造工艺，提出了表面镀层的方法，分析了工艺过程，通过试制，达到了一定的效果。
In view of the traditional making technology of smooth limit gauge, a method of plating surface is put forward. The process of technology has been studied, has been tried and has been fairly effect.
通过分析超声波硬度传感器的特点，提出采用超声波硬度传感器技术实现对管件镀层硬度进行现场无损测量的方法。
By analyzing the characteristic of the ultrasonic hardness sensor, a nondestructive testing method that using the ultrasonic hardness sensor technology for pipe coat is put forword.
通过化学液相沉积的方法，在木器饰品表面沉积一层装饰性的镀层或艺术图案，开辟出一条木器装饰的新途径，具有较高的经济效益。
Chemical liquid deposition is applied to coat the wood decoration with a layer of decorative or artistic pattern. A new way of wood coating shows its good economic benefits.
在金属表面采用先进的离子电镀技术替代了传统的镀膜方法，使得镀层颜色更均匀，更稳定，不易脱落。
In metal ion plating surface adopts advanced technology instead of the traditional method, the coating, coating color more even more stable, fall off.
介绍了制备纳米镀层的电沉积方法，主要有直流电沉积、脉冲电沉积和复合共沉积。
The electrodepositing method for the preparation of nano-deposit was introduced, including direct current electrodeposition, pulse electrodeposition and composite electrodeposition.
本发明还披露了一种在钢带上形成铝-锌-硅合金镀层的方法。
A method of forming a coating of an aluminium-zinc-silicon alloy on a steel strip is also disclosed.
将多重空心阴极溅射靶应用于双辉离子金属渗镀试验。结果表明，这种方法可以加速金属渗镀层的形成。
The result shows that this method has a high surface alloying and deposition rate, and the multiple structure made of alloying and coating layers can be formed, in double glow suface alloying process.
比较了钌、铑和钯镀层的性能，并介绍了钌镀层性能的测试方法。
The deposit's properties of ruthenium, rhodium and palladium were compared. Testing methods for ruthenium deposit's properties were described.
实验研究了普通陶器材料化学镀镍的操作方法、工艺条件及各种因素对镀层的影响。
The operating methods, the process and the influence of several factors on the nickel-plating on the surface of ordinary pottery were studied by the experiment.
镀层：是在紧固件表面上用电解作用、电解作用，脉冲或可靠方法粘附金属。
Plating: plating is the application of a metallic deposit on the surface of the fastener by electrolysis, impact, or other suitable means.
本发明还提供了一种使用本发明的电镀液来形成彩色镀层的方法。
The invention also provides a method for forming color plating by using the electroplating solution of the invention.
固体颗粒磨蚀对汽轮机的危害不可忽视。减少颗粒、防磨镀层和将颗粒引向旁路是目前采用的三种解决方法。
Solid particle erosion may damage the turbogenerator sets. Minimizing particles, wear-proof covered layer and by pass are three effective approaches for Minimizing solid particle erosion.
对此，本文根据理论和实践，阐述了金属镀层金相试样的制备方法和显微分析技术。
Therefore, on the basis of theory and practice, Preparation and microscopic analysis of metallic coating samples are described in this paper.
研究了一种新型的镍磷合金镀层镀后处理工艺，即在常温下。采用化学的方法对镍磷合金镀层进行封孔处理。
A new post-treatment technique that Ni-P alloy coatings can be sealed at ambient temperature by chemical method has been investigated and developed.
提出一种新的电镀金刚石工具镀层与基体结合强度测试方法。
A new method for measuring bonding strength between electroplated layer and substrate of diamond tool is proposed.
薄膜镀层由于厚度小，难以用通常的磨损方法评估其耐磨性。
The antiwear properties of thin film coatings are difficult to be evaluated by ordinary method because the coatings are too thin in thickness.
还将回顾理解表面镀层以及与之相关的各种分析方法、效模式分析方法。
Various analytical and failure mode analysis techniques in understanding surface finishes and their related problems will also be reviewed.
还将回顾理解表面镀层以及与之相关的各种分析方法、效模式分析方法。
Various analytical and failure mode analysis techniques in understanding surface finishes and their related problems will also be reviewed.
应用推荐