铸造技术开发的专业解决方案。
LVMFlow - professional solution for developers of foundry technology.
为项目负责人提供铸造技术支持，面向市场形成专业和标准化的整体方案。
Provides the foundry technical support to the program manager to create the dedicated, professional and standardized offer package to the market.
对开式离心铸造机模具设计是设计出相关的工艺过程，选择、确定工艺方案和技术要求。
The design for operation characteristic mold of the centrifugal casting machine is to design the relevant craft course, choose the technics projects and technique requirements.
其次，对反重力铸造控制方案进行了研究。
Secondly, the control project of counter-gravity casting is researched.
我们从原材料选用和热处理方案两方面阐述了材质为ASTM A487B的铸造曲轴材料评定试块的生产工艺。
We discuss production technician of assessment coupon of casting crank which made of ASTM A487B from two sides i. e material selection and heat treatment processes.
对采用4种不同铸造工艺方案的阀体铸件凝固过程进行了数值模拟及缺陷预测，获得了与试验相一致的模拟结果。
The numerical simulation of temperature field and shrinkage defect prediction for a valve casting, which was involved in 4 kinds of casting proces.
根据计算机模拟结果和辙叉心轨的几何形状的特殊性，确定了辙叉心轨的铸造工艺方案。
According to the calculated results and the geometry of frog, the casting process was determined.
依据床身的铸造工艺、车床的实际工作状况、刚度和固有频率等论证每个减重方案的可行性。
Based on the casting process of bed, the actual lathe work condition, stiff and inherent frequency, we discuss feasibility of each plan.
通过对铝合金扁铸锭外形尺寸实测数据的分析，提出了一种半连续铸造结晶器内腔形状的优化设计方案。
An optimization design of the crystallizer internal shape for semi-continuous casting was proposed according to the outside dimension data of the flat ingots.
本文给出了由此方法实现快速铸造的工艺方案，并进一步实现了金属零件的快速铸造。
A process chart for quick casting based on this method was presented, and a metal part was produced.
该技术在辅助铸造工艺设计，优化工艺方案以及缺陷分析等方面可以提供有力的支持。
This simulating technology could give powerful support for aiding the design of foundry technology, optimizing foundry process and analyzing the cast defects.
根据数值模拟结果并结合理论分析，对铸造工艺方案进行了优化设计。
According to the results and combining theoretical analysis, the casting process was optimized.
通过提出几种不同的挤压铸造工艺方案，研究了挤压铸造技术成形压缩机活塞的可行性。
The availability of compressor piston in squeezing casting has been researched by comparing different squeezing casting ways.
对铝电解铸造配料进行了详细分析，研究了配料算法，提出了优化配铝方案，并对此方案的软件实现作了简要介绍。
The paper mainly analyzes the primary aluminum casting proportioning, studies the calculation method of proportioning and put forward the alternative of optimized proportioning aluminum.
本文介绍了铸造镁阳极过程中钢芯尺寸和位置存在的问题，并提出了解决方案。
The problems about the position and dimension of the core in the alloy anode were introduced in this article, the resolving measurements were putted forward.
受到自然界龙卷风抽吸现象的启发，本文探索了空气旋流集中吸送物料的新途径，提出一种新的铸造吸砂装置方案——空气旋流加速器。
Cyclone accelerator is put forward as a new dispenser by means of the exploratory analysis of central cyclone suction, based on the suction phenomenon of tornado.
优化后的薄壁铝合金壳体铸件的低压铸造工艺方案合理，可以有效地优化壳体温度场，降低铸件出现缩孔缩松几率，生产出高质量的合格铸件。
The optimized casting process can optimize effectively temperature field and reduce the possibility of shrinkage holes(porosities), obtaining the qualified shell with high quality.
最终确定出合理的铸造工艺方案。
根据数值模拟结果，确定了进行批生产的铸造工艺方案。
Based on the numerical simulation result, the casting process of the valve for practical mass production has been set up.
为了消除这些缺陷，采用加补贴和保温冒口的方法对铸造工艺进行了优化，最大程度地减小和消除铸造缺陷，获得合理的铸造工艺方案。
In order to eliminate the shrinkages, the casting process was optimized by using pad and insulated risers, which decreased the shrinkages, so the reasonable casting process was gained.
利用CAD对铸造工艺参数及铸造工艺方案进行数值模拟。
The foundry technique parameters and programs were numerically simulated through CAD.
识别以及标准化铸造过程设计最佳方案方面的历史经验是得到证实的。
Proven history of identifying and standardization of casting process design best practices.
得出的优化方案为将原始铸造工艺中的双直浇道结构改为较为简单的单直浇道系统；
The optimum process is that, the double-gating system in original process is replaced with a single-gating system.
得出的优化方案为将原始铸造工艺中的双直浇道结构改为较为简单的单直浇道系统；
The optimum process is that, the double-gating system in original process is replaced with a single-gating system.
应用推荐