高精密低温度系数金属膜电阻器。
中文描述：金属膜电阻，工业，1%容差。
Description: Metal Film Resistors, Industrial, 1% Tolerance.
揭示了金属膜的形貌；
同时还对微颗粒表面镀金属膜的应用进行了研究。
At the same time, the applications of all kinds of metal-coated samples were investigated.
本文还分析了束缚态电子对金属膜光学常数的影响。
The affect of bound electrons to optical constants of metal films is also analysed.
该文进行了金属膜和纸板过滤的苹果汁除菌效果的比较。
Effects of removing bacteria from apple juice using metal membrane and filter paper were compared.
该金属膜与陶瓷基体结合牢固，与金属有良好的浸润性。
The metallic film combines strongly with the ceramic matrix, and the treated ceramic surface also has good wettability with metal.
本文讨论了二元混合气体通过微孔金属膜扩散分离的过程。
The diffusional separation processes of binary gas mixtures through microporous metal membranes were discussed in this paper.
用于金属膜和金属氧化物膜的制备，已获得了很好的效果。
Good metal and metal oxide films were produced by this method.
介绍了确定金属膜表面粗糙度的表面等离子激元光谱方法。
A method for determining the surface roughness parameters of metal film with surface plasmon spectroscopy is proposed.
不时地有人建议采用镀有金属膜的织物以减少织物的发射率。
The use of metallised fabrics is sometimes proposed to reduce the emissivity of a fabric.
分析了金属膜的厚度和光栅周期对器件的折射率灵敏度的影响。
The effects of the thickness of metallic film and grating period on the refractive index sensitivity of the device are analyzed in detail.
提出一种用电涡流传感器实现无损在线测量工件金属膜厚度的方法。
This paper suggests a method for measuring the thickness of metal plate for working pieces on line using the eddy current sensors without any damage.
若使用旋涂法，就是在金属膜的上面旋涂一层UV树脂并用UV固化。
If the spin coating method is used, a UV-resin is spun on top of the metal film and cured by UV-exposure.
而其下层金属膜一般较厚，用以隔绝镀膜衬底材料对波导结构的影响；
On the contrary, the base metal film is usually thicker to block the light from leaking into the substrates.
金属膜上发生的分子键合或膜上的分子构型变化导致共振角发生位移。
A molecular binding event taking place on or near the metal film, or a conformational change in the molecules bound to the film causes a shift in the resonance Angle.
根据金属膜具有高反射率的特点和可以进行诱增透的原理，介绍了透0。
Based on the high reflection feature of the metal film and induced transmission theory, a novel element transmitting in 0.
金属膜电阻器**广泛的阻值范围，有着精密阻值， 公差范围小的特性。
Metal film resistors offer a wide range of resistance range, with precision resistance, tolerance range of small features.
分析了金属膜在合成立方氮化硼过程中的作用，提出了金属膜的形成机制。
The functions of the metal films have been analysed, and the formation mechanism of the metal film has been put out.
介绍了铝及其合金表面采用电化学陶瓷成膜技术制备无机非金属膜的工艺。
The paper describes that inorganic non-metallic film on surface of aluminum and its alloys were formed by electrochemical deposition of ceramic film (EDCF) technique.
本文制备了一种新型的纳米硅模板，并以此为模板制备了各种纳米贵金属膜。
In the thesis, a new nanostructured silicon template is reported, and hiring it as template, nanostructured noble metal thin films are obtained through immersion plating method.
但是其折射率分辨率对金属膜厚度非常敏感，影响了SPR传感器的适用性。
However, this ri resolution is very sensitive to the thickness of metal films, deteriorating the adaptability of SPR sensors.
研究发现电场增强跟入射光斑大小，探针的锥形角，以及金属膜厚度密切相关。
The enhancement factor strongly depends on the illumination spot size, taper Angle of the probe, and the metal film thickness. The tolerance of the alignment Angle is investigated.
平板金属膜底面中央贴设有真空吸附管口，真空吸附管连接真空吸附装置的出口。
A vacuum adsorption nozzle is stuck on the center of the bottom surface of the metallic film of the flat plate, and a vacuum adsorption pipe is connected with an outlet of a vacuum adsorption device.
受侧向荷载作用的金属膜常被用作压力装置的超压防护或实现某些特定的开关操作。
Metallic membranes under lateral pressure are widely used to protect equipments from the danger of overpressure or to accomplish some particular switch operation.
表面电磁振荡激元波（SPW）谐振是金属膜参数及其表面状态的十分灵敏的函数。
The surface plasma waves (SPW) resonance is a sensitive function of the optical constants of metallic films and their surface conditions.
金属化是淀积一层薄薄的金属膜的工艺，将其制成模版用于形成所需的内部互连排列。
Metallization is the process of depositing a thin film of metal and patterning it to form the desired interconnection arrangement.
在一个特定示范性实施例中，此技术可被实现为一种用于沉积金属膜(150)的方法。
In one particular exemplary embodiment, the techniques may be realized as a method for depositing a metallic film (150).
这种显微技术采用棱镜波导耦合结构，在棱镜下底面依次镀有金属膜-波导层-样品层。
The structure consists of a coupling prism and 3-layer film coated on the bottom of prism in proper order.
这种显微技术采用棱镜波导耦合结构，在棱镜下底面依次镀有金属膜-波导层-样品层。
The structure consists of a coupling prism and 3-layer film coated on the bottom of prism in proper order.
应用推荐