聚四氟乙烯组件是由经特殊工艺处理的聚四氟乙烯内管，不锈钢丝增强曾外套和两端金属接头组成。
The teflon hose module is by passes through special craft processing the teflon inner tube, the stainless steel wire enhancement level coat and the both sides metal attachment compose.
本实用新型公开了一种汽车转向油管油泵接口的定位结构，它由金属接头、 定位块（定位片）组成。
The utility model discloses a positioning structure of a steering oil pipe and an oil pump interface for an automobile, which comprises a metal joint and a positioning block (positioning piece).
环氧胶接接头在水中破坏失效的原因主要是渗入到胶接层的水分子取代了胶粘剂分子在金属表面的粘附。
The reason of the failure of epoxy bonded joint in water was that the epoxy adhesive on the metal surface was substituted for water.
广泛应用的材料、金属支架与接头都由建筑师精心挑选，并根据空间和结构的要求，进行安装。
Widely utilised materials, metal brackets and joints, are carefully selected and positioned with respect to both the spatial and structural requirements.
研究了焊缝金属相对宽度和焊缝金属强度对接头性能的影响。
Influence of the relative width of weld metal and strength of weld metal wes researched.
如果无法找到三同轴的真空接头，那么可以在绝缘的BNC连接处构建金属安全屏蔽(图4 - 18)。
If a triaxial vacuum feedthrough is unavailable, a metal safety shield should be built around the isolated BNC connection (Figure 4-18).
此外，我公司还承接各种特殊连接形式，非标准旋转接头和金属软管及不锈钢法兰的设计、制造。
In addition, I also take the form of a variety of special connections, non-standard rotary joints and metal hoses and stainless steel flange design, manufacture.
考察了金属化工艺、镀镍及镀后热处理对接头剪切强度和钎焊效果的影响。
Influences of the metallizing technologic conditions, Ni plating and subsequent annealing on the joint shear strength were investigated.
确定以某型号雷体为代表类型的水下兵器用金属承力件与复合材料的合理胶接接头方式，以达到理想的连接、防渗效果。
The reasonable bonding joint between load-bearing metal parts and composite for the present of a certain torpedo is decided to achieve the ideal bonding and leakproof.
金属材料的焊接性主要决定于焊接接头的组织及其性能。
Welding of metallic materials is mainly determined by the organization and properties of welded joints.
利用有限元方法研究了金属镶嵌对单搭接接头应力分布的影响。
The finite element method (FEM) is applied to investigate the effect of metal inlay in single lap joint on the stress distribution.
能在4、6芯金属丝电话电缆上接上4、6芯标准电缆接头的专用压接工具。
In 4, 6 core wire on the telephone cable connected to the 4, 6 core standards cable joint special pressure tool.
非晶体金属焊接工艺新颖，焊接接头表面光滑、内外无焊瘤、抗晶间腐蚀性能良好。
The joints welded by newly developed non-crystal metal welding process have smooth surfaces, with excellent intercrystalline corrosion resistance and no internal and external welding beadings.
金属或塑料电缆接头。
道路油罐车。液态化学产品金属油罐。排放装置。快速接头。
Road tankers. metal tankers for liquid chemical products. discharge devices: quick - action couplings.
采用电子万能试验机测试钛金属激光焊接头的力学性能。
Mechanical properties of pure titanium laser welded joint were tested by universal testing machine.
研究了在胶瘤中嵌入三角形金属楔块对单搭接接头强度和应力分布的影响，结果表明，金属楔块能显著提高接头的强度。
The influence of embedded trilateral cross-section metal bar in the fillet on the strength and stress distribution of single lap joints was discussed.
我们现在可以生产各种不同类型的UL和BS,GS标准非绝缘端子，美国标准的线管连接头，金属接线合。
We can now produce a variety of different types of ul and BS, GS standard non-insulated terminals, the United States standards-ray tube connector, metal wiring together.
结果表明：随低强焊缝金属相对宽度变小，接头抗拉强度增大；
Its results show that with decreasing the relative width of under-matching weld metal, the tensile strength of welding joint increase.
提出了金属—氧化物过渡层—玻璃的接头结构形式及静电场条件下离子扩散及接合模型。
The models of "metal oxides glass" of joining structure and ions diffusion bonding are indicated.
采用过渡层法进行钛合金与不锈钢的焊接时，基本能够避免焊接材料之间脆性金属间化合物的大量生成，从而有效提高焊接接头的连接强度。
The intermetallics could be avoided effectively by using the method of transition layers between titanium alloy and stainless steel, and the tensile strength of welded joints is enhanced.
金属镍在电渣精炼前需用氩弧焊焊接接长，为保证焊接接头具有足够熔深，需要大参数进行焊接。
Nickel rod needs to be lengthen by argon arc welding before the electroslag refinements, large welding parameters are needed to assure the sufficient penetration.
结果表明，该方法的检测结果可靠，不仅能对汽车车身点焊接头进行100%的快速无损检测，而且适用于任何金属薄板点焊接头质量的检验。
Test results showed this method is credible, and it can be used to inspect the spot weld quality of car bodies quickly by 100%, and inspect the spot welding quality of any sheet metal.
爆炸复合材料的界面电阻，是用其制作的异种金属导电过渡接头的一项重要的技术指标。
Interface resistance of explosive composite materials, which are used to produce different kinds of metal electric transit point, is an important technique target.
研究了纯镍铸铁焊条冷焊时，稀土金属镧、铈、镨、钇及钕对焊缝热裂纹敏感性的影响规律，并分析了铈对焊接接头力学性能和加工性能的影响。
The influence of Lanthanum, Cerium, Yttrium, Praseodymium and Neodymium on weld hot cracking susceptibility of the pure nickel electrode used for cold welding of cast iron was studied.
研究了焊缝金属相对宽度和焊缝金属强度对接头性能的影响。
The main influencing factors of the microstructure in weld metal are composition and cooling rate of the weld metal.
接头焊缝金属的断裂韧度显著低于母材，而热影响区断裂韧度则介于母材和焊缝金属之间。
The fracture toughness of the weld metal is lower than that of the base metal and the fracture toughness of heat-affected zone (HAZ) is intervenient between those of weld metal and base metal.
研究了交流和直流反接两种型式下焊丝金属熔敷率、焊接接头金属组织以及接头的力学性能。
The deposition efficiency of welding wires metal, microstructure and mechanical properties of welded joints were studied.
陶瓷与金属焊后接头的残余热应力是影响其性能的主要因素。
Residual thermal stress plays a major part in performance of joints of ceramic and metal.
通过焊缝金属相变温度和残余应力测试以及焊接接头疲劳强度试验，分析了焊缝金属相变温度对焊接残余应力和焊接接头疲劳强度的影响规律。
The effect of transformation temperature of weld metal on the residual stresses and the fatigue strength of welded joints is analyzed based on their test.
应用推荐