采用该方法成形的零件，表面光滑、无拉深压痕。
The parts shaped in this way are free of dents but with smooth surfaces.
通过实际应用，采用该方法具有较高的测量精度。
The method has been proved to be of a higher measuring precision through applications.
提供了采用该方法完成的项目网络计划生成实例。
The example for creating network schedule of project is given on.
也可以采用该方法进行多传感器数据纵向融合预告。
Also can use this method to undertake fore-and-aft confluence forecasts much sensor data.
结论：采用该方法更适于RPE细胞的收获和培养。
Conclusion: The modified method is more suitable for cultivating RPE cells in rabbits.
结果：采用该方法矫治约3～4个月扭转牙得到矫治。
Result: The torsiversion can be corrected in about 3~4 months.
采用该方法可以很容易地求解不规则平面图形的面积。
The area of an irregular plane figure can readily be obtained with this method.
实验表明，采用该方法场景分割正确率可达86.9%。
Experimentation results reveal that the rate of correct segmentation is up to 86.9%.
采用该方法，系统监控管理功能通过一些监控对象来实现。
By using this method, management functions in the colliery system are implemented by a group of monitoring objects.
采用该方法不仅可以提高搜索效率而且也可以节省硬件资源。
The method proposed in this paper can get higher searching efficiency and needs less hardware resource at the same time.
而且，通过综合利用，束线并未因采用该方法有明显加长。
On the other hand, the beam line is not obviously lengthened for the use of this method.
实例计算表明，采用该方法可以较好地拟合水泵效率特性曲线。
It is proved with the example that the new method works well for water pump efficiency characteristic curve fitting.
采用该方法设计了几个实例，并由此验证了其正确性和有效性。
The correctness and effectiveness are testified by several SSC's designed using the new method.
只要训练样本可靠，采用该方法建模可以达到比较高的精度要求。
Modeling with this method can achieve high precision if the training samples are reliable.
采用该方法，并加上自动反馈装置后可进行生产过程的自动控制。
Fhis method can be used for automatic control in production by adding an automatic feedback device.
采用该方法得到的井身轨迹资料更符合实际，提高了钻井的准确性。
The data of well tracks obtained by adopting this method are more realistic and the drilling accuracy is thus improved.
采用该方法对设备振动信号进行非线性检验，检验结果与实际情况相符。
The method is used for detecting nonlinearity of machinery vibration signal time series, the result is consistent with the practice.
对比分析结果显示，在保证实时性的同时，采用该方法达到了更好的逼真度。
The analysis to the experimental results shows that our system can achieve both real-time performance and high fidelity effects.
实验证明，采用该方法设计的智能传感器具有良好的检测性能和网络通信性能。
The experiment results demonstrate a satisfying performance on measurement and network communication of the sensor by using this method.
与传统工艺相比，采用该方法具有净化效率高、无二次污染、运行成本低的优点。
Compared to traditional technology, this technology has the advantages of high purification efficiency, no residual waste generation, and low maintenance costs.
对采用该方法求解点源出平面波动问题时的数值稳定性和精度进行了数值试验研究。
Numerical test study about the stability and precision of the method is made by discussing the solution of SH wave motion.
采用该方法，分离软基岩场地联合效应和非弹性衰减的影响，并把二者分别确定出来。
The combined effects of soft rock sites and anelastic attenuation factor have been separated and determined respectively by (using) this method.
理论分析和实验都表明，采用该方法可使光强稳定系统压缩噪音的能力有数量级的提高。
It is proved theoretically and experimentally that this method makes an order of magnitude improvement in reducing the laser noise for the optical stabilizer.
采用该方法对通信网可靠性指标体系进行了相应优化，降低了指标体系的相关性与冗余度。
The index system of communication network has been optimized by the method, the index correlation and index redundancy have been reduced.
采用该方法设计的多路LED显示系统具有硬件结构简单、软件编程容易和价格低廉等特点。
The multipath LED display system designed with the method is with simple in hardware structure, easy in software programming and low in price etc.
计算了不同磁极宽度情况下的电机推力，结果表明采用该方法可以有效减小电机的推力波动。
The FEM calculation results prove that the thrust fluctuation of the motor can be effectively cut down with proposed method.
同时，采用该方法能够方便地在路径构造的过程中进行路径验证，从而提高了路径处理的效率。
At the same time, it is convenient to perform validation during the path construction process by adopting this method, which makes path processing more efficiently.
采用该方法制造的车身木质主模型，完全满足产品设计部门的要求，其结构合理，制造周期短。
Wooden body master model made by this process can completely meet demand of product design department, construction of body master model is proper and manufacturing period short.
采用该方法制造的车身木质主模型，完全满足产品设计部门的要求，其结构合理，制造周期短。
Wooden body master model made by this process can completely meet demand of product design department, construction of body master model is proper and manufacturing period short.
应用推荐