Jeff看到的是“麦克斯韦尔曲线”，其中描绘出如果团队投入超过40小时的工作时间，那么团队的开发速度就会下降。
Jeff was shown a "Maxwell Curve" which depicted that when the team put in more than 40 hours then the velocity of the team went down.
得到速度随时间变化的关系曲线。
The relation curves that velocity varies with time are obtained.
测绘了切削温度、后刀面磨损量与切削时间或切削速度的关系曲线，分析了刀具前、后刀面显微磨损、破损形貌和化学变化。
Cutting temperature, relation curves of wear with cutting time and cutting speed, microscopic features and chemical changes of rack face and rear face of the tin coated tool were measured.
采用摆式技术有效地改善了曲线通过时的舒适度，并提高了曲线通过速度，缩短了运行时间。
The application of the tilting technology has effectively improved the comfortability in negotiation of curves, improved the curve negotiation speed, and shortened the operation time.
采用不同旋转速度的电极进行电火花深小孔加工，通过采集加工时间数据，得到多条加工曲线。
The experiment used electrode with different rotation speed to process deep-small holes, and collected the time data during the whole process, after this more of the processing curves could be formed.
分析了粒子速度滞后对压力——时间曲线和燃烧室流场的影响。
The effect of particle velocity lags on pressure-time curves and flow field in chamber is analyzed.
给出了理论冷却曲线、冷却曲线、固相率及单位时间内潜热释放速度之间的关系及实验结果。
Theoretical cooling curves, the relationship between cooling curve, fraction of solid and liberation of latent heat per unit time, and experimental results are presented.
提出了以保护渣烧损曲线最后一个拐点对应的时间来表征其熔化速度的新方法。
A new method of using the time of last inflection of burning curve of mold powder as the index of the melting speed is developed.
对废弃矿井甲烷涌出速度对时间的曲线按时间积分到无穷大，可以得到计算时刻的废弃矿井资源量。
To integrate the curve of abandoned mine methane emission rate versus time to infinity against time, can get abandoned mine CBM resources at the time of estimating.
采用在不同时间点增加阻力系数修正系数的方法拟合速度-时间曲线和位置-时间曲线。
Different drag correction coefficients at different time points are introduced, and then both speed curve and ballistic curve fitting are finished.
为此，提出用固支梁挠度曲线表示较快车辆的速度-时间关系曲线，由此得到了一种无格子模型。
In this paper, the deflection curve of a beam of fixed ends is used to represent the speed-time relation of the faster vehicle.
用钻孔煤心现场解吸数据可以近似得到废弃矿井甲烷涌出速度对时间的下降曲线。
To use the drilled coal core site desorption data can get a drop-down curve of abandoned mine methane emission rate versus time approximately.
该仿真系统不仅可以用于仿真NC程序文件的执行过程，而且实现了以控制周期为单位，对速度、加速度曲线以及加工时间、加工距离的仿真。
The system can simulate the executive process of nc programme files, and realize the simulation of speed and acceleration curve, and process time and distance with the unit of controlling period.
根据流体力学的原理，使用破损船舶的进水速度函数，得到船舶进水速度随时间的变化曲线；
On the basis the principle of hydrodynamics , the paper deduces the function of velocity of water ingress, and figures out survival time.
使用软件MATLAB6.5进行计算，并绘出凸轮行程、速度、加速度随时间的变化曲线。
The software MATLAB6.5 is used to calculate and draw the curves of travel, velocity and acceleration to time.
乘用车实际行驶工况通常可表示为基于时间的一段时间-速度曲线。
The car real driving cycle usually is a velocity-time curve based on times.
因此，实际观测得到的反射波到达时间，并不是标准的双曲线，而是一条畸变了的双曲线，从而影响速度分析和迭加效果的质量。
Therefore, the actual observation obtains the reflection time, is not the standard hyperbolic curve, but was a distortion hyperbolic curve, thus influence speed analysis and iteration effect quality.
距离的两倍与时间的平方的最佳拟合曲线的斜率就是重力加速度。
The slope of the best fit line for distance doubled and time squared gives the acceleration due to gravity.
分别对开胸犬及7例二尖瓣金属瓣置换术后患者利用多普勒组织成像中的速度时间积分曲线对放置钛夹处心肌及二尖瓣环处的长轴运动位移进行定量研究；
Quantitative study was made on time velocity integral(TVI) of the implanted myocardium and left ventricular long axis in 7 canine models, and 7 patients with replaced metal mitral valve.
目的探讨体外模拟心脏运动对多普勒血流流速曲线速度时间积分(VTI)测定的影响。
Objective To investigate the influence of simulated heart motion on the Doppler spectrum velocity - time integral (VTI) of simulated blood flow measurements through an in vitro model.
利用传感器技术记录了落锤冲击板过程中速度随时间变化曲线，计算了冲击动能和材料损伤时的能量吸收。
The drop weight velocity during impacting was obtained and recorded by a velocity transducer and the corresponding signal processing system.
能够作出在一定时间内不同开采速度条件下的地表移动变形曲线。
Some graphs of surface movement and distortion can be shown also when working face is advanced with different mining speed in certain time.
通过对变形情况，速度、加速度时间历程曲线的结果进行分析研究，对该型保险杠性能的进一步改进提出了建议。
After carefully analyzing the bumper deformation and dynamic characteristics, Suggestions are given on how to improve the crashworthiness of the bumper.
给出了末敏弹扫描角速度、扫描角和扫描曲线随时间的变化，以及扫描覆盖区随高度的变化。
The variations of scanning angular velocity, scanning angle, scanning locus and scanning cover field are shown.
文中着重对S曲线加减速算法进行了深入的研究，推导出以时间最优为目标、具有恒定速度段的S曲线加减速的计算公式，并通过仿真进行验证，得出加速度曲线的各个时间转折点。
In this paper, it studies the algorithm of S-curve with a constant velocity duration in detail, which takes time optimal into account. A simulate example is taken to test each switching point.
通过对实际碰撞曲线进行转换，调整时间、幅度等参数，设计输出与碰撞曲线一致的模拟加速度传感器；
Through converting collision curve and adjusting the parameters such as the timing and magnitude, a simulated acceleration sensor whose output is the same with actual collision curves is designed.
通过对实际碰撞曲线进行转换，调整时间、幅度等参数，设计输出与碰撞曲线一致的模拟加速度传感器；
Through converting collision curve and adjusting the parameters such as the timing and magnitude, a simulated acceleration sensor whose output is the same with actual collision curves is designed.
应用推荐