试验结果表明，与比例三通调速阀控制的敏感回路相比，该系统速度控制精度高，结构简单。
Experimental results have shown that the system features precise speed control and simple design as compared to the sensing circuit controlled by T-type proportional speed regulation valve.
试验结果表明，与比例三通调速阀控制的敏感回路相比，该系统速度控制精度高，结构简单。
Experimental results have shown that the system features precise speed control and simple design as compared to the sensing circuit controlled by T-type prop...
针对推力波动对于直线电机的速度控制精度和平稳性影响较大的问题，设计了速度环滑模控制器。
Since the thrust ripple has great influence on the precision and steadiness of the velocity control, the sliding-mode control device of speed loop was designed.
实际中该系统采用直流力矩电机直接驱动的控制方法，达到了很高的速度控制精度和较宽的调速范围。
Practically, the control method applying direct_drive option for DC torque motor can achieve wide_range and high_precision velocity control.
最后，控制算法方面运用了基本PID控制与模糊控制相结合的控制算法，达到了较高的控制精度和速度，而且对于类似问题的解决具有借鉴意义。
Finally, as to the control arithmetic, PID and fuzzy control are colligated to improve the control precision and speed, which is helpful for solving the similar problems.
从而成功地实现了对气压焊的焊接压力、气体流量、顶锻位移量等焊接过程参数的控制，并使控制系统具有较快的动态响应速度和较高的控制精度。
So the control of the welding parameter such as welding pressure, gas flux, upsetting length is realized, and the system has a high dynamic response rapid and a high control precision.
本文主要介绍了IC自动排片机通过采用台达B2系列伺服，大幅度地提高了系统的速度和控制精度。
This paper mainly introduces the IC automatic machine through using Delta B2 series servo, greatly improves the speed and precision of control system.
最后通过仿真对比得到算法收敛因子的合理取值，验证了可变步长功率控制算法可有效提高功率控制精度和收敛速度。
The simulation result derives the suitable convergence factor and verifies the improvement of the proposed algorithm in terms of power control precision and convergence speed.
平整速度是影响延伸率控制精度的关键因素。
Speed of skin-pass mill is an important factor to affect precision of elongation control.
本焊缝跟踪系统控制精度高、速度快、可靠性好。
This system has high control precision, fast response and good reliability.
控制精度和响应速度有待提高。
It is asked to increase the response speed and control accuracy.
因此，电磁线圈电流的控制精度和速度将直接影响电磁轴承的悬浮特性。
Therefore, the suspension characteristics of the electromagnetic bearing would be directly affected by the accuracy and response speed of the current in electromagnetic coils.
试验结果表明该控制系统响应速度快，控制精度高，可实现对电弧电压的稳定控制。
The result shows that this control system responds quickly with high control precision and can control the arc voltage steady.
针对V型坡口的焊接试验证明，系统具有较高的响应速度和控制精度，完全能够满足实际工程的应用需要。
The experimental results of the V slope welding show that the system has highly response speed and control precision and the system can meet the requirements of the engineering application.
插补算法是数控系统的核心技术之一，插补算法的选择及算法特性直接影响到数控系统的控制精度、速度及加工能力等。
Interpolation algorithm is the core technology in Numerical Control (NC), which has direct impact on the control accuracy, feed speed and machining capacity.
根据对高速切削加工计算机数控控制精度和控制速度的影响，分析了直线插补与样条插补方法的优缺点。
The advantages and disadvantages of spline and linear interpolation methods in relation to CNC - control accuracy and rate for high speed cutting are analyzed.
实验结果和实际应用证明，所开发的系统工作稳定、响应速度快、具有良好的控制精度。
The experimental result and actual application show that the developed system works stably, has fast response speed and possesses good control accuracy.
该系统具有控制精度高，实时性和稳定性好的特点，可使自主车以精确的速度进行连续行走。
It has such advantages as high control accuracy, good real-time characteristic and stability, which will make AGV walk continuously at an accuracy speed.
加热炉燃烧控制技术，就是在各种燃烧工况条件下，找到合理的最佳空燃比，以提高炉温控制精度和加热速度。
The combustion control techniques for reheating furnace are in order to search the optimal air fuel ratio, to improve the control precision of the temperature and the velocity.
实验结果表明，该方法可以有效提高系统响应速度及控制精度。
The experimental results showed that such method could effectively improve system response speed and system control accuracy.
实际应用结果表明，系统具有较强的实时性和可靠性，不仅温度控制精度高，而且动态响应速度快。
The result of application is high real time and dependability in this system. And not only is it high precision of temperature control, but also it is quick dynamic respond.
在温度控制模块中，采用分阶段模糊控制的方法提高了系统的响应速度和控制精度。
In the temperature control module, a two-phase fuzzy controller is adopted to enhance the system response speed and the temperature control precision.
超精密数控车床加工精度的提高不仅依赖于数控装置的运算速度和曲线的拟合精度，同时还依赖于伺服系统的跟踪精度和点位控制精度。
The manufacture precision of super exactitude NC lathe depends on not only the operation rate of NC deviceand joined precision, but also the error of track and point location about servo system.
为了提高DVD聚焦伺服系统的控制精度和响应速度需要加入控制器，提出了一种新的校正算法。
We need to add the controller in order to enhance the control precision and response speed of DVD focus servo system, and then a new emendation arithmetic was put forward.
在电流环中引入了一组电流交叉乘积项计算出准确的轴电压控制值，实现控制系统在较宽的速度范围内满足较高的控制精度。
By adopting the new design of circuit loop with cross-multiplying terms, the precision of voltage and speed controlled will be enhanced in a wider speed range.
模拟式PID与数字式PID相结合的控制方案，控制精度高，跟踪速度快。
The control scheme combining analog PID with digital PID has a high control accuracy and fast tracking speed.
机械偏转响应慢，偏转速度与控制精度相互制约。
The response of mechanism deflexion is slowly, which velocity and precision are confinement each other.
结果表明：系统具有控制精度高，搜索速度快，抗干扰能力强等优点。
The results have shown that the system has the advantages of high control accuracy, rapid searching and strong anti-jamming capacity.
所以根据不同的控制精度、控制速度选择合适的加减速控制方法是很重要的。
Therefore, depending on the control precision and control to choose the right speed acceleration and deceleration control method is very important.
所以根据不同的控制精度、控制速度选择合适的加减速控制方法是很重要的。
Therefore, depending on the control precision and control to choose the right speed acceleration and deceleration control method is very important.
应用推荐