通过生产实践对其模具进行了参数设计。
Technology and mould design have been introduced with practical parameters design.
通过生产实践给出了该工艺条件和加工要点。
通过生产实践证实，回归方程具有很高精度。
The high accuracy of these regression equations has been proved in productive practice.
通过生产实践证实，回归方程具有很高精度。
The accuracy of these regression equations has been proved very high in productive practice.
并通过生产实践提出了改善浆粕加工性能的措施。
Through Production practice, several measures to improve the processing properties of the pulp are also put forward in this article.
通过生产实践，证明了热水技术在烧结工艺中所起的作用。
Through the operation practice, the advantage of hot water technique in sintering process was proved.
通过生产实践表明：该焊机用于薄板焊接，有其独特之处。
The production practice has shown that this kind of welding machine is suitable for plate sheet welding and it has an unusual advantage.
通过生产实践，对高效浓密机的主要特点和存在问题进行了评价。
Major characteristics and existing problems of these equipment are evaluated on the basis of operation practice.
通过生产实践证明，该工艺提高了自动化冲压效率和材料利用率。
Proved in practice, the process improves the automatic stamping efficiency and material utilization.
通过生产实践，在复合顶板的管理方面提出了行之有效的几点做法。
Based on production practice, provide the methods of controlling the compound roof.
通过生产实践证明：该工艺生产效率高，质量稳定，工序安排合理。
It has been proved through production practice that it has high efficiency, stabilization of quality and working procedure inreason.
通过生产实践，探索了高磷连铸灰铸铁型材生产工艺及组织性能特点。
Based on production practice, the continuous casting process of high phosphorus gray iron bar sections and their structures as well as properties was investigated.
本文通过生产实践对圆筒形蒸汽转化炉进行分析总结并介绍应用前景。
This article Outlines the practice and application prospect of cylindrical steam reformer.
无临空面水压爆破技术通过生产实践应用，取得了良好的经济技术效益。
This shows the field Application of explosion-in-water blasting technology without free face to have advantages both in technology assessment and economic effect.
目的通过生产实践，进行了无烟煤作为在生物除铁除锰水厂滤料的研究与应用。
The anthracite used as filter material in water plant for biological removal of iron and manganese has been studied and practiced through production practices.
通过生产实践表明该模具生产出的产品外型可靠，结构合理，产品质量优异。
Proved in practice, the products of the mould have reliable shape, reasonable structure and excellent quality.
通过生产实践，针对传统纺纱胶辊的缺陷，构想了长寿命轴承一体化胶辊这一新思路。
Considering the disadvantages of the conventional cots, a brainchild of all-inclusive cots with long service life bearings is hatched out.
通过生产实践，对用石灰和铬矿洗炉进行了分析，并介绍了洗炉后转炼硅铬合金的方法。
According to the practice, the paper analyzes washing lime and chromite, and introduces the means of tunning Cr-Si alloy after washing furnace.
通过生产实践，获得了低拉引速度下产品质量好， 生产周期较长的最佳镀膜工艺参数。
The technological parameters for producing good quality coated glass at low pull out rate were optimized .
通过生产实践观察和理论分析，阐述了矩形磁极线圈弯曲半径对弯角部位形状尺寸的影响。
Through the observation to the practical production and analysis with the theories, the influence of bend radius inside the rectangle pole coil against dimension of the bend corner part is discussed.
通过生产实践中的工艺探索与经验总结，提出了铸轧法生产8014空调箔坯料的生产方法。
Production method of 8014 Al foil stocks for air-conditioner by cast-rolling method was put forward.
通过生产实践和商检资料分析论证，高温短时间触蒸前处理工艺，对生丝抱合力是有益无害的。
Through production practice and data analyses in commodities inspection, it is proved that short-time pretreating process of cocoon direct steaming is useful to the improvement of raw silk cohesion.
本文对影响磨矿效率的主要因素进行了分析，通过生产实践，对提高磨矿效率的途径进行了探讨。
This paper has made an analysis on factors influencing grinding efficiency. On the basis of operation practice, the possible ways to improve grinding efficiency are discussed in this paper.
通过生产实践，给出胡麻粗纱煮漂工艺条件，能有效地去除纤维上的杂质，提高白度和纤维素含量。
Through practice production, the optimum process condition is given, which can efficiently remove impurity on fiber and increase whiteness and content of cellulose.
本文分析了方坯低碳钢内部裂纹产生的原因，并提出了改善措施，通过生产实践取得了一定的效果。
The internal crack of bloom is analyzed, and some improvement measures are put forward, which got some effect through the production.
焊接方法采用碳弧焊，通过生产实践验证是可行的，用户在使用中对产品的反馈论证了其焊接质量的可靠性。
The method of Carbon arc-welding is adopted. It is feasible in practice to be used in the material weld. The feedback from the user demonstrates the reliability of welding quality.
通过生产实践，对采金船在现代河床、河漫滩开采所引起的安全问题，提出了解决方法和各种方法的适用条件。
Through operating practice, ways of resolving the problems resulted from dredge work at contemporary river bed and beach are put forward. The condition of each way opted is also discussed.
本文通过生产实践，探索了改变A034六辊筒开绵机尘棒安装角的大小对紬丝开清作用和提高吹净绵质量的影响。
In this article, the blowing efficiency of spun silk waste is investigated by varying the settingangle of grid bar of six-roller opener type A034 and the improvement of the product is stated.
本文通过生产实践，探索了改变A034六辊筒开绵机尘棒安装角的大小对紬丝开清作用和提高吹净绵质量的影响。
In this article, the blowing efficiency of spun silk waste is investigated by varying the settingangle of grid bar of six-roller opener type A034 and the improvement of the product is stated.
应用推荐