橄榄色人造绿堇云石通过热处理产生。
Prasiolite, an olive-colored material, is produced by heat treatment.
通过热处理改变碳钢试件的晶粒尺寸。
The grain sizes of test parts were changed by heat treatment.
这种合金能通过热处理获得良好的综合机械性能。
The combination of mechanical properties of this alloy can be well achieved by heat treatment.
通过热处理试验对t 23钢的回火脆性进行了研究。
The temper brittleness of T23 steel was studied through heat treatment experiment.
介绍了通过热处理提高白口铸铁硬度和韧性的试验结果。
This paper highlights the experiment results in improving the toughness and hardness of white cast iron by heat treatment.
通过热处理手段获得可区分晶粒尺度和片层厚度的全片层组织。
The fully lamellar microstructures with different grain size and lamellar spacing were obtained by heat treatment.
通过热处理可提高轨钢的强度及硬度，接触疲劳强度也随之提高。
Heat treatment can increase the tensile strength and the hardness of the rail steel, and the contact fatigue strength is also increased.
定购这些产品时，可以要求在制造流程之后通过热处理方法除去有机粘合剂。
These products may be ordered with the organic binding agents already removed by heat treating following the manufacturing process.
一些高铬钢能通过热处理硬化，可用于抗磨坏，抗磨损，抗腐蚀需求的地方。
Some high chromium steels can be hardened by heat treatment and are used where resistance to wear, abrasion, and corrosion are required.
具有马氏体基体的高铬铸铁，有理想的耐磨组织，但通常要通过热处理才能得到。
However, the martensitic matrix of high-chromium cast iron has excellent abrasion-resistant tissues, which used to be obtained only by means of heat treatment.
通过热处理实验，探讨长庆外输原油最优热处理条件及影响热处理效果的有关因素。
The optimum conditions for heat treatment of Changqing output crude and some factors concerned affecting the effect of heat treatment are approached through heat treatment experiment.
选用三种不同碳、铬含量的耐磨钢，通过热处理获得不同数量的二次碳化物和马氏体基体。
The effects of varying the amount of secondary carbide on the character of matrix under three-body abrasion of wear resistant steel have been investigated.
通过热处理工艺改进，调整了渗碳淬火工艺参数并改变了装炉方式，提高了齿轮轴接触精度和使用寿命。
The improved heat treatment process was obtained by adjusting technology parameters and changing parts loading mode. As a result, the contact accuracy and life of countershaft were improved.
控制这一由于奥氏体和铁素体的碳溶解性完全不同而产生的反应，使得通过热处理能获得很大范围的特性。
Control of this reaction, which arises due to the drastically different carbon solubility of austenite and ferrite, enables a wide range of properties to be achieved through heat treatment.
控制这一由于奥氏体和铁素体的碳溶解性完全不同而产生的反应，使得通过热处理能获得很大范围的特性。
Eontrol of this reaction, which arises due to the drastically different carbon solubility of austenite and ferrite, enables a wide range of properties to be achieved through heat treatment.
另外，铝、铜、镁、钛等及其合金也都可以通过热处理改变其力学、物理和化学性能，以获得不同的使用性能。
In addition aluminium, copper, magnesium, titanium and their alloys also can change their mechanics, physics and chemical property through the heat treatment to make different serviceability.
确实，从历史的传承看，我们的技艺通过热处理工作者与整个加工行业，学术界及工程界的互动沟通演化而获得成功。
Indeed, from a historical context, the evolution of our craft through time and the interactions of heat treaters with the entire manufacturing, academic and engineering community ensures success.
通过热处理前后残余应力测量结果的对比可以看出，使用该设备不仅提高了热处理质量和工效，而且减少了环境污染。
Through measuring and comparing of the residual stresses be fore and after treatment, it is result in raising the quality and effect of treatment and reducing the environment pollution.
通过热处理前后残余应力测量结果的对比可以看出，使用该设备不仅提高了热处理质量和工效，而且减少了环境污染。
Through measuring and comparing of the residual stresses be fore and after treatment, it is result in raising the quality and effect of treatment and reducing the environment po…
通过热处理前后残余应力测量结果的对比可以看出，使用该设备不仅提高了热处理质量和工效，而且减少了环境污染。
Through measuring and comparing of the residual stresses be fore and after treatment, it is result in raising the quality and effect of treatment and reducing the environment po…
应用推荐