逆变焊机取代传统焊机已成为必然趋势。
Inversion welder replace traditional welder have become inevitable tendency.
电力行业1994年开始组织逆变焊机的选型工作。
Inverter Welding machine type - selecting work was carried out in power trades from 1994.
本文介绍了电力行业在逆变焊机选型工作中的一些做法和原则。
Some methods and Principles of inverter welding machine type - Selecting in power trades are introduced in this article.
设计了基于DSP和单片机的全数字化IG BT逆变焊机系统。
A digital IGBT inverter welding machine system based on DSP and MCU was designed.
这些引弧器的应用对于提高逆变焊机的引弧性能、可靠性等有较大的益处。
These arc strikers are of value for improving arc strike behaviour and reliability of invert welding power sources.
曾在成都电焊机研究所从事逆变焊机的技术开发、弧焊机器人工作站的推广应用工作。
He was engaged in technical development of inverter welding machine and popularization the application of arc welding robot workstation in Chengdu Electrical welding Equipment Institute.
主要介绍非晶、纳米晶材料的特性及纳米铁心在逆变焊机上的应用计算和应注意的问题。
This article introduces the character is tics of amorphous and nanocrystalline materials, and the application of anocryst alline iron core on invert welder as well as the points for attention.
实验结果显示，采用逆变焊机进行焊接，焊点的平均强度有所提高，飞溅率和未焊合率均有大幅度降低。
The experiment shows that by using inverter spot welding, the average intensity of the welded spot is increased while the splash rate and the incomplete penetration rate are descend.
提高可靠性是逆变焊机生产者的当务之急，而进行可靠性增长试验则是达到产品期望可靠度的有效手段。
To improve the reliability of inverter welding machine is very necessary to the producer. Reliabililty growth test is the power tool to improve the reliability.
本文设计了一种适用于中大功率、便携式逆变焊机，具有电源输入侧功率因数高，主功率器件实现软开关等特点。
In this paper, a multifunctional welding machine is designed with the characters of high power factor, soft switching and portable remove.
从整体上对数字控制逆变焊机系统进行了仿真研究，提出用受控源的方法实现了动态电弧负载模型与系统的连接。
A system simulation study was done for full digital welding inverter, and a method of connecting dynamic arc load model to the system with controlled source was presented.
开关管的开关速度是影响逆变焊机频率提高的主要因素，通过比较IGBT和MOSFET的优缺点，认为MOSFET焊机可以获得较好的动态响应速度。
The speed of switching component is the primary factor that influences boosting frequency of inverter. Compared with IGBT, MOSFET can be used to improve dynamic responding speed.
介绍IGBT弧焊逆变器的红外遥控的设计，详细介绍系统设计、主电路设计、红外遥控系统硬件设计和红外遥控系统的软件设计。按设计研制出的遥控逆变焊机试验样机。
The design of infrared telecontrol IGBT converting welder is presented in this paper and the designs of the system, power circuit, infrared system hardware and software are presented in detail also.
本文介绍一种应用于IGBT逆变式点焊机的点焊控制器。
A controller applied to IGBT inverter spot welding machine is introduced in this paper.
本论文主要介绍了所研制的单片机控制逆变埋弧焊机的组成结构和控制原理。
The component parts and control principle of pulsed SAW inverter power source are mainly introduced in the paper.
讨论了可控硅逆变式半自动MIG焊机研制的主要技术问题。
The main techniques of SCR inverter semi-automatic MIG welding machine are discussed in this paper.
介绍了该逆变式弧焊机的构成，工作原理及特点。
The paper introduces the configuration, principle and characteristics of the inverter for arc welder.
研制开发出一种单片机控制的新型IG BT逆变埋弧自动焊机。
A new IGBT inverter control by SCM for submerged arc welding is developed.
逆变tig焊机由于其工作的特殊性，电磁兼容性问题十分严重，进行深入研究很有必要。
Owing to its particularity that invert TIG arc welder work, therefore its EMC also looks more protruding, and the research that need to be gone deep into.
变压器加整流器习惯被称为一体式变压器，是逆变点焊机的核心部件。
The core part of the inverter spot welding machine is the integrated transformer, which is consisted of transformer and rectifier.
结果表明：这种新型的大功率埋弧逆变自动焊机有着广阔的应用前景。
The result shows that this newfashioned high-power machine of submerged-arc welding inverter has wide prospect of application.
介绍了一种半桥逆变式电子束焊机高压电源的工作原理和控制电路。
This paper introduces the working principle of high voltage source with half-bridge inverter for electronic beam welder.
本文介绍了目前逆变式弧焊机的基本原理和技术现状，并指出了有待进一步解决的几个技术问题。
This paper introduces the basic principle and the technical status quo of the current inversion arc welding machines, and points out several technical problems needed to be resolved.
通过实验，比较了在焊接电流、通电时间以及电极压力等参数变动时，单相工频点焊机与逆变直流点焊机的焊接工艺性能差异。
With the multi parameters fluctuated, the different of the technology performance between AC spot welding machine and inverter spot welding machine is analyzed.
本课题研制了一台单片机控制的逆变式脉冲MIG焊机。
A simple chip microcomputer controlled inverter pulse MIG welding machines is developed in this paper.
针对IGBT逆变埋弧焊机设计了基于单片机80c 196kc的控制系统，介绍了系统的软、硬件组成和控制原理。
A control system based on monolithic computer 80c196kc is designed for IGBT welding inverter with submerged arc. The software, hardware, and control principle of the system are introduced.
该焊机由于采用了中频逆变技术，使其效率和功率因数都有较大幅度的提高，不但减小了体积，减轻了重量，而且具有比传统TIG焊机更精密的控制、调节性能等。
Compared with the conventional TIG welding machine, this new inverter proves to have much higher efficiency and power factor, less volume and weight, and especially, more precise parameter control.
本文为熔化极CO2保护的IGBT逆变半自动弧焊机电源研制了一套控制系统。
In this thesis, a set of control system is developed for IGBT inverter power supply of consumable-electrode CO2 shielded arc-welding machine.
控制电路是逆变弧焊机的技术关键之一。
The control circuit is one of technology keys of arc welding inverter.
控制电路是逆变弧焊机的技术关键之一。
The control circuit is one of technology keys of arc welding inverter.
应用推荐