可供设计逆变式弧焊电源时参考。
The designs for inverter arc welding power sources are available for reference.
本文介绍了一种新型交流逆变式弧焊电源。
A new system of inverter for arc welding is introduced in this paper, which gives medium frequency AC current.
介绍了该逆变式弧焊机的构成，工作原理及特点。
The paper introduces the configuration, principle and characteristics of the inverter for arc welder.
逆变式点焊电源是电阻焊领域研究的重要方向之一。
Inverter spot welding power source is one of important directions in the studies of the resistance-welding field.
本课题研制了一台单片机控制的逆变式脉冲MIG焊机。
A simple chip microcomputer controlled inverter pulse MIG welding machines is developed in this paper.
研制了一台基于DSP的数字化逆变式等离子切割电源。
A digitized inverted plasma cutting power supply base on DSP was developed.
本文介绍一种应用于IGBT逆变式点焊机的点焊控制器。
A controller applied to IGBT inverter spot welding machine is introduced in this paper.
讨论了可控硅逆变式半自动MIG焊机研制的主要技术问题。
The main techniques of SCR inverter semi-automatic MIG welding machine are discussed in this paper.
本文讨论了脉宽调制(PWM)逆变式弧焊电源的功率因数。
The power factor of PWM are welding power source has been discussed in this paper.
本文提出了逆变式弧焊电源高频变压器的设计步骤、方法以及实例。
The design procedures and examples of high frequency transformer Used in Inverter ArcWelding Power Source are proposed in this paper.
利用大功率开关电源技术研制出新一代的IGBT逆变式恒电位仪。
A new generation of IGBT inverse constant potential instrument is developed by using powerful switching power supply technology.
介绍了一种半桥逆变式电子束焊机高压电源的工作原理和控制电路。
This paper introduces the working principle of high voltage source with half-bridge inverter for electronic beam welder.
本文介绍了逆变式等离子弧切割机的工作原理、使用方法和维修措施。
The principle, operation and repair of invert plasma are cutting machine are introduced in this paper.
对一种大功率IGBT逆变式空气等离子切割电源的主电路进行了原理分析与设计。
The paper analyzes and designs the main circuit of high-power IGBT inverted air plasma cutting power supply.
介绍了一种主电路采用MOSFET和铁氧体磁芯构成单端正激的逆变式多功能焊机；
The inverter versatile arc welding machine is introduced. The structure of the main circuit is made up of MOSFET and ferrite magnetic core.
介绍了并联逆变式IGBT变频电源的工作原理及在汽车发动机曲轴淬火上的应用情况。
The working principle of the parallel contravariant IGBT variable frequency power supply and its application in the quenching process of engine crankshafts are introduced.
提出了电火花加工脉冲电源逆变式结构的一种控制策略，阐明了其实现方法和控制原理。
A method for controlling an inverting EDM pulse generator was introduced and illustrated the designing way and controlling principle.
本文就GNG系列逆变式高压真空直流电源的原理系统、设计特点、技术性能等做一简要论述。
In this paper, the principle system, design characteristic, technology performance of high voltage vacuum power supply in GNG series inverter type are briefly mentioned.
介绍非晶态合金变压器的性能特点，并通过实例给出逆变式电焊机用非晶态变压器的设计方法。
Characteristic and design of no-crystal alloy transformer in inverter welding machine is introduced in this paper.
本文就GNG系列逆变式高压真空直流电源的原理系统、设计特点、技术性能等做一简要论述。
In this paper, the principle system, design characteristic, technology performance of high voltage vacuum power supply in GNG series invert...
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
本文介绍了目前逆变式弧焊机的基本原理和技术现状，并指出了有待进一步解决的几个技术问题。
This paper introduces the basic principle and the technical status quo of the current inversion arc welding machines, and points out several technical problems needed to be resolved.
建立了微机控制和IGBT逆变式脉冲MIG焊电源系统，实现了MIG焊接过程弧压自适应闭环控制。
A microcomputer controlled IGBT inverter power source for pulsed MIG welding is developed. It realizes the self adaptive control and closed loop control of arc voltage in pulsed MIG welding process.
介绍了一种用逆变方式和倍压整流方式构成的中频逆变式引弧器，并对其工作原理及参数设计进行了分析。
A medium frequency pulsed starting arc unit, which consistS of a voltage dowble is introduced in this paper, and its working principle and parameter design are also analyzed.
根据机器人焊接电源的要求，研究了一种由高速单片机80c3 2 0为控制器的IGBT逆变式弧焊电源。
At the special request of robot, this paper study a IGBT inverter arc welding power source which is controlled by high speed single-chip microcomputer 80c320.
采用状态空间平均法建立了全桥逆变式弧焊电源主回路的平均状态方程，经过线性化处理推导出频域小信号模型。
The paper introduces the dynamic characteristic and the structure of arc welding power, and gives a method of designing arc welding power which using DSP chip as a controller.
逆变式焊接电源采用现代电子器件和电磁材料进行电源变换，具有体积小，重量轻，效率高，适用范围广等优点。
The welding converter power source, which is converted by modern electronic component and ferromagnetic substance, has great advantage of small volume, light weight, high effectivity, etc...
逆变式弧焊电源是新一代的弧焊电源，其特点是速度快，直流输出电流波纹小，电弧稳定，质量小，体积小，能耗低。
The inverter arc welding power source is the new power source and features high speed, small DC current ripple, stable arc, light weight, small capacity and low power consumption.
介绍了逆变式等离子切割机主变压器常用的磁心材料的性能特点，提出了设计、制作主变压器的步骤、计算方法及示例。
The properties and characteristics of core materials commonly used in plasma cutting inverter are introduced in the paper. The design procedures and examples of main transformer are proposed.
介绍了逆变式等离子切割机主变压器常用的磁心材料的性能特点，提出了设计、制作主变压器的步骤、计算方法及示例。
The properties and characteristics of core materials commonly used in plasma cutting inverter are introduced in the paper. The design procedures and examples of main transformer are proposed.
应用推荐